Question about 2002 Volkswagen Beetle Turbo S

Open Question

What does code P1351 mea on 1998 chevy suburban mean

Obd2 code reads p1351 1.ic curcuit high voltage 2.ic curcuit 1&4

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


If you do not know how to do the fault code, you can go to a shop, and they should point you in the right direction OBD2Guide com Technical service for OBD2 auto scan tools

Apr 23, 2014 | 1999 GMC Suburban

1 Answer

I have a 1999 chevy silverado giving me error code p1351. I have replaced the ignition control module 3 times now and it keeps going bad again within 2 months. What could be causeing my problem?

Four digit codes are brand specific, in your case code 1351 means the computer is finding high voltage in the control circuit for the coil which does go to the ICM. The ICM grounds the coil like a set of points once did.
My guess would be a faulty coil or a ground connection somewhere. The coil may be grounding thru the ICM instead of thru the block. Or the ICM ground is not strong enough to carry the current from the coil.

Jul 16, 2013 | Cars & Trucks

3 Answers

I am getting code p1351 on a chevy s10 it will not start could this be the timing chain

No this is not a timing chain
P1351 CHEVROLET - Ignition Coil Control Circuit High Voltage

Conditions for Setting P1351:

The voltage on the ignition control circuit exceeds 4.9 volts, and the engine speed is less than 250 RPM.

Bottom line?

Most likely its a bad Ignition Control Module.

Mar 28, 2011 | 1996 Chevrolet S-10 Pickup

2 Answers

OBD system diagnostic trouble codes? what do they mean? P0123 P0138 P0205 P0305 P0300

po123-tps curcuit high---po138-02 sensor high volts bank 1 sensor 2,--po205--injector curcuit open cylinder 5,---po305-- misfire cylinder 5,--po300 random/multible mis fire,

Jun 02, 2010 | 1998 Dodge Caravan

1 Answer

Aztek idles high obd2 codes p0102, p0141

maf or vaf A curcuit low input, po141 is 02 sensor bank 1 sensor 2. this should be the 02 sensor after convertor,

May 15, 2010 | 2001 Pontiac Aztek

2 Answers

1996 chevy silverado has hard time starting. Put it on a computer and it told me (p1351 ignition control, circuit voltage high). What do i need to do to fix the problem?

Check the connections at the vehicle control module
(vcm) located on the left fender. Check for bent-broken pins or pins that have pushed through the plug
Make sure the connections are tight and dry.
Do the same at the coil. Also check for any exposed
or shorted wires between the two. Hope this helps

Mar 03, 2010 | 1996 Chevrolet K1500

1 Answer

96 suburban , firing problems

Disconnect the ignition coil module connector.
  1. Probe the ignition coil module connector terminal with a voltmeter to ground.
  2. With the voltmeter on the AC scale, crank the engine.
  3. Monitor the voltage reading.
Is the voltage reading within the specified value?
1-4 V if not replace ECM

Aug 24, 2009 | 1996 Chevrolet Suburban

1 Answer

We have a 1998 chevy blazer and we had my brother in law test the computer with the OBD2 and it read code "PO785" what does it mean

shift solenoid malfunction

google "PO785" and you will find more out about it. I saw something about a 3-2 shift

May 10, 2009 | Chevrolet Blazer Cars & Trucks

Not finding what you are looking for?
2002 Volkswagen Beetle Turbo S Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers


Level 3 Expert

76846 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8548 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides