Question about Toyota Cars & Trucks

1 Answer

Jumped time WHAT IS GOING ON KEEPS JUMPING TIME GIVING PO300 PO301 PO303 PO305 P1150 P1346 P1349 P1351 TIMING BELT WITH NEW TOYOTA TENSIONER AND TUNE DONE. RUNS GOOD TILL ABOUT 20 MIN OF DRIVING THEN RUNS LIKE **** THROWS THESE CODES WHAT COULD IT BE?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 20,706 Answers

A blast from the past (fav. movie)
i love caps, snaps me back to my first home computer (Northstar z80)
and my silly ASR33, printing terminal, caps only, flash ! im there....
misfires on all 6 cylinders. if patient,.
what car? what engine? what year?
1150 AFR bad.
1346 VVT says, cam is bouncing like MAD (DEVIATIONS) bank1
1349 VVT frozen, means it can change it ,but how could it if it bounces. bank 1
1351 VVT Sensor Range/Performance Problem (Bank 2)

here is my guess , your engine is????
2.5,3.0,3.3,3.4,4.0lilter engines,

new belt ,why old one snapped or shredded? or worse slipped?
my guess, bad belt setup, not timed right. or bad tensioner. bad idlers, or
or bad VVT parts, or bent head valves.

the V6 may be interference, and TOY dont say, but Gates lists most 96 and newer as Interference...engines.
i will assume it is (this is 1st deal with me, as im ,FIRST do no HARM"
and these engines , what do i do?
i do a leakdown test, just after the belt is replaced and tensioned, turning engine by hand.
if the leak down test FAILS the belt snapped and the valves did hit.
this i do everytime, it takes me, what 30 more minutes?
this act prevents further damage to head and pistons and rod bearing.
the damage can cascade fast to needing a new engine. now..
IMO, good luck.

Posted on Jan 02, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: timing belt for 91 toyota corolla

instructions for replacing the timing belt

Posted on Feb 28, 2009

  • 115 Answers

SOURCE: reads codes of po300,po302,po303,po305

Hi these are mis-fire codes ,
P0300 is a general mis-fire detected code the others relate to specific cylinders,
P0302 is cylinder 2 misfire
P0303................3........
p0305..................5........
I would check your spark plugs first if Ok you need to make sure the coils are working ok for this you need an osciloscope to check output voltage if your not sure then take to a qualified mechanic with Cadilac experience it could be caused by an air leak,bad ECT sensor or even Mass air flow sensor ,codes only tell you the result not the cause

Posted on Jul 24, 2009

  • 407 Answers

SOURCE: i got coes po604, po303, po300, and po301 for my

miss fire codes need to check tune-up, proper spark at all cylinders

Posted on Oct 15, 2009

  • 197 Answers

SOURCE: codes:p1346/p1349/p1354/p0446/p0300/p0301/p0303/p0305/p0307/ p0430/car runs rough

P0301 Cylinder No. 1 Misfire Detected
P0302 Cylinder No. 2 Misfire Detected
P0303 Cylinder No. 3 Misfire Detected
P0304 Cylinder No. 4 Misfire Detected
P0305 Cylinder No. 5 Misfire Detected
P0306 Cylinder No. 6 Misfire Detected
P1346 Variable Valve Timing (VVT) Circuit Range/Performance Fault
P1349 Variable Valve Timing (VVT) System Malfunction
P0330 Knock Sensor
P0446 EVAP Vent Control Fault
P0430 Catalyst System

Stop driving immediately.....

You defiantly skipped on your timing........

Posted on Feb 15, 2011

  • 5370 Answers

SOURCE: My cadillac cts 2003 has

P0036 - Heated Oxygen Sensor (HO2S) Heater Control Circuit Bank 1 Sensor 2.

The O2 will not cause a miss, but the miss can cause an O2 code. The O2 heater code you are getting is most likely just a bad O2, or possibly a bad fuse or even corrosion on the fuse terminals.

------------------

P0147 Heated Oxygen Sensor (HO2S) Heater Performance Bank 1 Sensor 3

I believe that this is the oxygen sensor at the rear of the catalytic converter. It's not the sensor itself, it's the heater circuit, which just needs power, although it can be set if the sensor itself isn't working instead of the "right" one, P0146 or another HO2S performance code. The heater circuits are just power and won't cause the sensors to interact.

-----------------------------

PO300 P0301 PO303 PO305 is random misfire codes. Cylinder number 1,3 and 5 needs to be checked.

--------------

P2107- Throttle Actuator Control Module Internal Circuit.

----------------

For more help click this link directly:----

http://technoanswers.blogspot.com/2011/02/cadillac-cts-2003-error-codes.html

--------------

This should help.Keep updated.Thanks.Helpmech.

Posted on Feb 23, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Timing belt


You don't have the tension right. Belt should be tight when tensioned, tight enough that it can't slip. I'm not familiar with this engine, but you need to find the belt tightening procedure.
Go to autozone.com, register for free, giving make, model, year, and engine size. When registered, look under "repair guides" for timing belt R&R procedure.

Dec 10, 2013 | Dodge Colt Cars & Trucks

1 Answer

I replaced the timing belt on a 1991 plymouth colt with the 1.5l mitsubisi engine i also replaced the tensioner and now the car will not start and it keeps jumping time


Don't know how it could keep jumping time, unless the camshaft sprocket has badly worn cogs or teeth, or the tension is too loose. Can you get it reset, and then run the engine with the timing belt covers off? That way, you might be able to see what is causing it to lose timing.

Dec 10, 2013 | Dodge Colt Cars & Trucks

1 Answer

Corsa problems


if the car keeps jumping 2 or 3 teeth on the timing, it's possible that you need a new timing chain/belt and tensioner.

Nov 05, 2013 | Cars & Trucks

1 Answer

The timing belt keeps jumping and bending the vaules


If your timing belt keeps skipping teeth then you may need a new belt, a new automatic tensioner, or need to align the pulleys correctly before putting the belt on.

What happened prior to this problem starting?

Jun 23, 2011 | 1991 Eagle Talon

2 Answers

Computer analysis showed these codes... P0330 P1133 P1135 P1346 P1349 P1351 P1354. can anyone tell me what each of these mean?


P0330 Knock Sensor 2 Circuit (Bank 2)
P1133 Air/Fuel Ratio Sensor Circuit Response Malfunction (Bank 1, Sensor 1)
P1135 Air/Fuel Ratio Sensor Heater Circuit Malfunction (Bank 1, Sensor 1)
P1346 VVT Sensor Range/Performance Problem (Bank 1)
P1349 VVT System Malfunction (Bank 1)
P1351 Variable Valve Timing / CMP Sensor Range / Performance
P1354 Variable Valve Timing System Fault

NOTE:Variable Valve Timing (VVT) sensor is also known as camshaft position sensor.
The Variable Valve Timing (VVT) system controls intake valve timing in response to driving conditions.

Possible causes are:
  1. Incorrect valve timing P1346, P1349, P1351 & P1354
  2. Faulty oil control valve P1346, P1349, P1351 & P1354
  3. Faulty VVT controller assembly P1346, P1349, P1351 & P1354
  4. Faulty ECM All Codes
  5. Jumped timing belt All Codes
  6. Faulty Camshaft Position Sensor P1346, P1349, P1351 & P1354
  7. Faulty O2 Sensor (Bank 1, Sensor 1) P1133 & P1135

Apr 22, 2011 | 1999 Lexus ES 300

1 Answer

Codes:p1346/p1349/p1354/p0446/p0300/p0301/p0303/p0305/p0307/ p0430/car runs rough when idling/lexus gs 400 1998


P0301 Cylinder No. 1 Misfire Detected
P0302 Cylinder No. 2 Misfire Detected
P0303 Cylinder No. 3 Misfire Detected
P0304 Cylinder No. 4 Misfire Detected
P0305 Cylinder No. 5 Misfire Detected
P0306 Cylinder No. 6 Misfire Detected
P1346 Variable Valve Timing (VVT) Circuit Range/Performance Fault
P1349 Variable Valve Timing (VVT) System Malfunction
P0330 Knock Sensor
P0446 EVAP Vent Control Fault
P0430 Catalyst System

Stop driving immediately.....

You defiantly skipped on your timing........

Feb 14, 2011 | 1998 Lexus Gs 400

1 Answer

Timing belt keeps jumping tim 3 times know reset runs good for awhile


You have a bad timing belt tensioner. Stop driving it because you are probably due for a new timing belt also if the tensioner is bad. If the timing belt breaks while you are driving it, serious damage may occur like a valve punching through a piston, bent valve, damaged cam, serious stuff can happen if the timing belt breaks.

Jan 10, 2011 | 1993 Toyota Pickup

1 Answer

P1346 and p1351 code from toyota sienna 2001, new timing belt


yes your out on the timing marks, set it to zero remove the top cover and check the marks

Apr 04, 2009 | 2001 Toyota Sienna

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

196 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...