Question about 1990 Ford Ranger SuperCab

1 Answer

Clutch lets out at the very top of the pedal

When i drove the 4wd ranger i found that the clutch is difficult to let out on take off and stalls and will not let out going up hill. I want to know if there is an adjustment of should i just price an new clutch .

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 453 Answers

Sounds like the clutch is gone or going out. You can pull up on the clutch pedal with your hand then push down it should make a click sound but if the clutch is to far gone it won't make a difference. Your truck has a self adjusting clutch all ready. New clutch and labor for it will cost you $900 - $1200 dollars.

Posted on May 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 Ford Ranger Truck Clutch problems


I remember a problem with the Ranger Series involving the hydraulic assisted clutch. There was a special refill procedure for a few Year Models. If the hydraulics leaked during storage an air bubble could occur and they are next to impossible to get fresh fluid back to fill the void. And it would not fix the leak.

I remember a video showing all the components fastened to a display board to train Mechanics on the extra effort needed to bleed this system.

I would say to search the Web under a topic like "Ford Ranger hydraulic clutch bleeding" to find the article. Even if you replace the current clutch cylinder, it may be no less difficult to refill. Your mechanic may need the info you find.

Mar 19, 2014 | 1998 Ford Ranger SuperCab

1 Answer

1998 Corvette with manual transmission. when letting clutch pedal out, car stalls every time either in 1st or reverse


Give it more gas before letting the clutch out? Release the parking brake? Check for binding brake/parking brake parts if brake is released? Dammaged differential?

May 26, 2012 | Cars & Trucks

1 Answer

Gas pedal 'sticks' to the floor when accelerating


The gas pedal is recalled on many fords and toyotas and is a well known problem, get the pedal replaced

Jun 01, 2010 | 1995 Ford Ranger Supercab

6 Answers

My 1994 ford rangers clutch pedal just lost all pedal


There are two types of clutch actuators. (Mechanical & Hydtraulic)
A. For mechanical type,- Check the clutch cable as
this could be cut from wear and tear. This is easy
to replace. You can find this connected to the
pedal and the clutch lever near the transmission.
B.For hydraulic operated - Check the level of the
hydraulic oil at the cylinder of the hydraulic
actuator under the hood. This actuator is
directly connected to the pushrod driven by the
pedal. If the actuator is leaking, you have buy
a repair kit (Hyraulic clutch repair kit for Ford
Ranger 1994 MOdel.) These items must be
repaired to activate your pedal.

Oct 14, 2009 | 1994 Ford Ranger Supercab

1 Answer

I need a diagram to show where the clutch pedal spring fits on a 53 focus.the top bit is obvious but i cant find where the bottom hook fits ---.frosty


The clutch pedal return spring fits onto the cicular pressed steel ring that surrounds the clutch linkage. There is a tiny hole on the top edge of the steel pressing. Difficult to see and best found by feeling around top edge but take care as pressed steel has sharp edges.

Sep 27, 2009 | 2003 Ford Focus

1 Answer

I have A 1998 FORD RANGER EXT. CAB W/ 6 CYL.- 4.0 RECENTLY LOST PEDAL ON MY CLUTCH. REPLACED MASTER CYLINDER, SLAVE CYLINDER, AND THE CLUTCH PACK, HAVE FLUID THROUGH BLEEDER VALVE ON THE SLAVE BUT CAN NOT...


Take the top off the master cyl and slowly very slow push in on the clutch and watch for any bubbles comming up.Replace the top and pump pressure and bleed at the master direct by using the lines for bleeders.

Aug 13, 2009 | 1998 Ford Ranger SuperCab

2 Answers

Brake fluid in brand new 1989 ford ranger clutch slave


no it doesn't come filled basically you bleed it like a brake system. Fill the master cylinder and pump the clutch, there is a bleeder on the slave cylinder

Dec 08, 2008 | 1989 Ford Ranger

Not finding what you are looking for?
1990 Ford Ranger SuperCab Logo

Related Topics:

250 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...