Question about 2001 Dodge Dakota

1 Answer

I have a 2001 dodge dakota all lights and turn signals work great, the problem is my four ways will not work.changed out the combination flasher but still no four ways

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 207 Answers

If the actuator switch is under the four way flasher button may be faulty and it may just be the switch in the fuse box or under the hood in a fuse able link. Also check to make sure the combo flasher that the auto parts sold you is the right one . My friend went to parts store to get an oil change and filter , went home dropped the oil , pulled old filter to find new filter was WRONG ONE! What now ??? Am I to use the old filter?? I said NO call the parts store and make them bring you the right filter After all you paid them for the oil and new filter its not your fault they gave you the wrong filter its the parts counter Clerk not doing their JOB and therefore they should bring you the right one. That"s what delivery people R for. I have had the problem of wrong plugs and wires and damned if I'm making another 40 mile one way trip to town and back

Posted on Jan 03, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
polarcycle
  • 1392 Answers

SOURCE: 2000 dodge dakota quad cab turn signal problems, but flashers work. started out the turn signals would flash several times then quit. now i have nothing.

Either a multifunction switch, or a body control module problem. Possibly the flasher itself.

Posted on May 12, 2009

  • 4 Answers

SOURCE: Where is the turn signal fuse on a 2001 Dodge 3500

This problem sounds like one I have faced several times on my 2001 diesel Dodge. The culprit has been a fuse under the hood in the fuse panel on the driver's side, up near the steering column. Look through the clear top of the fuses you see, chances are excellent that you will find a green one with the little electrode "popped". This is common when you plug a round trailer plug in upside down, or otherwise ground a powered circuit for the lights through the trailer plug. Simply pull and replace, I keep a couple spares in the glove box because of this problem. Also, if you use the truck to go to the auto parts store, keep in mind that you have no brake lights either. Hope this works for you.

Posted on Aug 11, 2009

  • 291 Answers

SOURCE: 1992 Dodge Dakota signal lights quit working.

first check all fuses with a test light....and is that the only thing that quit working.... if power good sounds like turn switch it's self

Posted on Sep 01, 2009

  • 1024 Answers

SOURCE: hi i have a 1993 dodge dakota 2 wheel drive ext

when the 4-way flash you won't get the signal work!

Posted on Feb 27, 2010

  • 111 Answers

SOURCE: My turn signals, and four

you need to locate it fist its usually in the in-board fuse box(under driver side dashboard in a plastic box) the lid of the box should tell you which one it is and it is changed just like a fuse. i hope this helps

Posted on Dec 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Brake controller or trailer brakes connections or brake light to run system


The brake switch at the pedal does have six wires, but none go to the multifunction switch (on the steering column). The white wire with tan tracer goes to the combination flasher to be integrated with the turn signals/hazard lights. The combination flasher is under the dash next to the steering column and has a sixteen pin connector (ten of which have wires).

Aug 07, 2017 | Dodge Cars & Trucks

1 Answer

How to replace turn signal and hazard light flasher on a 2002 durango


This is the same procedure as a Dokota, you are in luck, there was nothing on the Durange but there isa good video for the Dakota. Replace Turn Signal for Dodge Dakota 2001

Jan 26, 2017 | 2002 Dodge Durango

1 Answer

2001 dodge stratus. left turn signal turns on 4 way blinkers?


I believe the problem is in turn signal/flasher control near the top of steering column. follow the link for a video that close to the exact procedure you will need to follow.

Apr 07, 2014 | 2001 Dodge Dakota

1 Answer

My low beam works on both sides but not the high beam on the drivers side. also my blinkers dont turn on or blink but, if you use your hazards they turn on and blink on my 2001 dodge dakota v8


Headlamp operation is controlled by the central timer module. If 10A fuse 11 in the junction box is OK, the module could be defective.

Turn signal operation is determined by the position of the multi-function switch in conjunction with the combination flasher. If 10A fuse 19 in the junction block is OK, the flasher could be defective

Dec 09, 2012 | 2001 Dodge Dakota

1 Answer

Turn signals & Flashers will not work on 2002 Dodge Dakota, replaced Combination Flasher unit, still no turn signal or Flasher


Hi Jeff , do you know how to test electrical circuits using a DVOM - digital volt ohm meter ? How to read an use a wiring diagram to pin point testing points in the turn signal circuits ? Here is a web site for free wiring diagrams http://www.bbbind.com/free_tsb.html .Enter vehicle info year ,make , model an engine size . Under system click on lighting ,then under subsystem click on turn signal lamp , Click the search button then the blue link . Then watch this videos an then test the power and grounds ,inputs to the Combination Flasher !
Basic Electricity for Service Techs Ohm law Current Flow Opens Shorts
How to Use Multimeter to Troubleshoot Common Problems
The Trainer 18 Electrical Testing Tips


Jul 03, 2017 | Cars & Trucks

1 Answer

1998 Dodge Durango flasher relays location


Turn on the Durango and check each of the four turn signals to make sure that the bulbs are not burned out. If you find one that has gone out, replace the bulb and retest the turn signals. When a bulb goes bad on this circuit, the resulting operation can mimic a bad flasher or one that is failing.

Locate the combination turn signal flasher and relay. It is on the left end of the driver's dash. Open the access door and view the collection of relays and fuses. At the left side of the mounting block is a larger flasher and relay. This is the combination turn signal flasher and relay.

Test the relay by placing you finger on the relay housing and activating the turn signal. If you have found the right one, you should feel a clicking as the turn signal blinks. Remove the relay, replace with the new relay and close the access door

.

Start the Durango and activate the turn signals to check that they each work. The light should turn on and should blink. Also, check the hazard lights to make sure they work.

Feb 11, 2012 | Dodge Ram 1500 Cars & Trucks

1 Answer

I have no blinkers. hazards work. nothing comes on when i hit the turn signal


change the flasher first it has a seperate circut in the flasher for the blinkers other than the four ways . . . . . cheap easy if that dosent work your switch will be bad :) thanks dont forget to rate my answer :)

Aug 18, 2010 | 1992 Dodge Dakota

1 Answer

I have a 2001 dakota turn signals are flashing real fast put in new bulbs ,flasher and problem continues.what can i do next.


check grounds then signal switch-oh but dont forget dodge have a body computer that controls all lights fron the switches with on-off or resisted signals-my advice go to a dodge repair outlet,will save you time and money

Sep 19, 2009 | 2001 Dodge Dakota

1 Answer

Brake lights don't work


Toggle the 4 way flasher switch on and off a few times and see if that corrects problem, if it doesn't replace the switch.

Apr 22, 2009 | 2001 Dodge Dakota

1 Answer

All other lights work except turn signals


thats because they use a combination flasher for the hazzards and turn,here is the location and a diagram have a good day DB
The combination flasher is located in the Junction Block (JB) behind the fuse access panel on the left outboard end of the instrument panel.
521409e.gif

Feb 19, 2009 | 2001 Dodge Ram 1500 Truck 2WD

Not finding what you are looking for?
2001 Dodge Dakota Logo

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...