Question about 2000 Nissan Xterra

Open Question

Shifting into second gear - 2000 Nissan Xterra

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My gear is stiff and experiencing a difficulty when engaging second gear. other gears seems to be fine but the shifting is not smooth.


I suspect that it will be in the shift mechanism
If it is a cable shift then replace the cable
If it levers or other linkages check and adjust or lubricate as required
I doubt it is in the clutch as you haven't mentioned difficulty in selecting first gear only shifting from 1 to 2nd.

Jun 21, 2015 | Opel Corsa Cars & Trucks

1 Answer

2002 pt cruizer won't shift out of first gear. could it be from the transmission relay?


Question is contradictory. First you say won't shift out of first gear, then you say won't shift pst second. If the latter is correct, yes could be the 3-4 shift solenoid has failed.

Feb 26, 2015 | 2002 Chrysler PT Cruiser

1 Answer

Shifting Problems


when has the last time you had a trans serv. done on it? if you take it to a shop the will tell you that you need a rebuild. thrid gear and over drive are about burned up.

Apr 27, 2010 | 2002 GMC Sierra 1500

2 Answers

MY TRANS WONT SHIFT INTO THIRD GEAR UNTIL IM DOING 45 MPH IT SHIFTS FINE IN FIRST AND SECOND GEAR WHEN IT IS IN SECOND GEAR AND WONT SHIFT TO THIRD I CAN PUT IT IN N AND BACK TO OVERDRIVE THEN IT SHIFTS.


Most likely your shift cable (from the selector to the transmission) is worn, maybe needs lubrication. Mine had a similiar problem, but had to shift it into neutral and back up to get it in reverse. A new shift cable solved the problem.

Jul 27, 2009 | Lincoln Town Car Cars & Trucks

1 Answer

1995 crown vic gear problems/gear shift wont lock


most likely the shift tube bushings are bad- you may have also lost a few screws in the shift tube or they could just be loose. you have to pull the steernig column down to inspect/repair it.

May 30, 2009 | 1995 Ford Crown Victoria

1 Answer

NO SECOND GEAR IN TRANNY


sounds like what happened to my camaro. it sounds like a stuck valve. i suggest taking it in for an estimate at a transmission specialist.

Mar 18, 2009 | 1996 Chevrolet K1500

1 Answer

1995 crown vic gear problems/gear shift wont lock


if the shifter is loose and sloppy feeling then the shift cable bracket has come loose under the dash at the steering wheel. remove the lower panel under the steering wheel so you can see under the dash then get flash light and look while jiggling the shifter. you should be able to see the cable and bracket. if the bracket is loose then tighten the bolts. note this bracket is at the steering colum.

Jan 21, 2009 | 1995 Ford Crown Victoria

Not finding what you are looking for?
2000 Nissan Xterra Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...