Question about 1993 Oldsmobile Cutlass Supreme

1 Answer

Need to find engien set up so i can remove starter

Where can i find the diagram for the engine so i can change muy starter on my 1193 cutlass supreme

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 53 Answers

Hi there it should be under the hood as you lift it, it should tell you where the starter is, if not it might be in the engine compartment somewhere, if all else is a no go, if your hood has some linning on it, as i have experienced this rare thing, i smogged cars and the info was undewr the linning of the hood, also check the door frames and air intake components, if the hood is dirty you might need to wipe it off to find the stickers as well......hope this helps you.....good luck....shia

Posted on May 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Transmission diagrams olds cutlass supreme 1996


Chilton Manual or look for specialized manuals at most auto parts stores

Jan 12, 2014 | Cars & Trucks

1 Answer

97 oldsmobile cutlass supreme sl vacuum diagram


Engine Vacuum Hoses are on a label
under the hood of all vehicles

Jul 01, 2013 | Cars & Trucks

1 Answer

I can't seem to start my 84 Oldsmobile cutlass


DID YOU GAP PLUGS CORRECTLY? CHECK TO MAKE SURE SPARK PLUG WIRES ARE IN RIGHT FIRING ORDER QUESTION DOES ENGINE TURN OVER LIKE IT WANTS TO START???? CHECK ALL FUSES SOME HAVE STARTER RELAY FUSES ALSO MAKE SURE TRANSMISSION IS FIRMLY IS PARK MAY HAVE A STARTER SAFETY RELAY CAR WONT START UNLESS PARK IS ACHIEVED.....GOOD LUCK

May 09, 2012 | 1985 Oldsmobile Cutlass Supreme

1 Answer

What tools are needed to replace starter on '93 cutlass supreme


a good socket set to remove the starter retaining bolts, usually a 10mm or 12 mm ring spanner to remove the power connections. a car jack and axle stands

Mar 24, 2010 | 1993 Oldsmobile Cutlass Supreme

1 Answer

1986 Oldsmobile Cutlass Supreme vacuum hose


Ok sent you this the engine you have to specify that engine has to help you. Thanks2c36ea6.jpg

Mar 24, 2010 | 1986 Oldsmobile Cutlass Supreme

1 Answer

1989 Olds. cutlass supreme has not run in 18 months. Gas tank is full. Placed battery charger on car and everything now has power - stll can not get car to turn over. QUESTION Car has sat in a garage for...


is the car starter turning the engine over? If it is then the fuel pump should be checked out.You dont need to prime the system if the fuel pump is working,If the engine is not cranking over then remove and clean starter gear.

Jul 24, 2009 | 1989 Oldsmobile Cutlass Supreme

2 Answers

My Cutlass Supreme S need diagram on installing starter.


I have a 3.4L engine and my starter is wedged in between the frame, oil filter, and then covered by A/C unit tubing headed to the A/C compressor.

Before I got started with the starter I personally had to remove the engine brace on the front of the car holding the engine in place to the frame (very easy) and laid it back on the engine. Then I removed the fans on my radiator and bracing sitting atop the radiator to help clear the way. I personally also had to remove some A/C tubing running to the A/C compressor of the car in order to remove the starter which was still running into some hose right next to the oil filter. So the A/C will have to be recharged afterwards.

Remove the little plastic shield covering the flywheel and some of the starter. Remove the 3 bolts holding the starter. Slowly work the starter out of its recessed hole being careful not to pull to hard on the hose right next to the oil filter.

Place the new guy in there and reinstall all components. Only this time you will need to recharge your A/C when you are done.

First remove the plastic shield covering the flywheel.

Jun 11, 2009 | 1993 Oldsmobile Cutlass Supreme

1 Answer

My 1992 Cutlass Supreme SL Olds failed emissions.


High NOX readings indicate a somewhat lean condition IE: hot exhaust. Possible causes are cracked and leaking vacuum lines or lazy oxygen sensors. If possible have a reputable garage with engine electronics scanner services check the sensor to see if its helping to create the lean condition

Apr 25, 2009 | 1992 Oldsmobile Cutlass Supreme

3 Answers

Diagram of engine


Having coolant leaking problems, everytime the car runs it runs hot, coolant filled, when car is then turned off coolant leaks out on drivers side underneath radiator. Hissing sound also on drivers side when running hot.

Jul 28, 2008 | 1995 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
1993 Oldsmobile Cutlass Supreme Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...