Question about 2006 Cadillac CTS

Open Question

My keyless remote is not sending a signal to my car and does not work.

My horn also stop working now. Check the fuses all are good. Aslo the wire to the horn looks good. help??

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
stormbrewin
  • 426 Answers

SOURCE: Tail light is out, brake and turn signal work

create your own earth wire off the original and screw/bolt to a good earth source.Nothing flash just a test if it works make a more permanant one

Posted on Oct 11, 2008

Ad
  • 10 Answers

SOURCE: Keyless Remote problem

you might have something left on inside your car (map lights, vanity mirror lights ....  the car has a module that will shut off the power to all the assy options if it senses a drain on the battery for 20 mins after the car is shut off .  the module will then wake up again when the door lock is turned or ignition is turned.  

Posted on Feb 01, 2009

  • 168 Answers

SOURCE: Where is the fuse for the horn on my 1990 cadillac allante

Is the horn not working? If so there is a horn rely that can be bad (to check it find a quite place with the car off, push the horn button down if you hear a click and the fuses are ok but, then you'll need to check the rely it self test light will work good for all the test, then there the wire going up to the horn button both will be under the dash that can be broken.

Posted on Mar 05, 2009

  • 1 Answer

SOURCE: 1995 cadallic deville remote dosnt work here at home

Try Ebay and search for 95 Caddi Deville Remote. It cost about 19.95 for new remote and it even comes with instructions on how to program it. I had a similar problem. Mine works great now......

Posted on Apr 12, 2009

  • 37 Answers

SOURCE: 1999 cadillac turn signals stopped working

Check the hazard switch brother. Thats a know source for this problem. Mess around a bit with it for a temporary fix but replace it at any rate!

Posted on Aug 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

My horn is not working on my 2008 pt cruiser but the relay clicks where do i find the fuse


The fuse box is usually next to the engine, near the battery. A black plastic box with a lid that unclips.
Does this look like what's inside?

a433b3df-ef5b-4f46-a28c-b29d4108d1cd-ozcepelvabhag1zh4pslnrk5-2-0.gif If Yes, you will need a 15 Amp, (blue), blade fuse to go into position number 14. There will be a diagram somewhere on the lid of the fuse box, (inside or on top), showing where this is.

Jan 05, 2018 | Cars & Trucks

1 Answer

My horn & volume buttons under steering wheel stopped working on my 2007 Dodge Nitro. I checked the horn fuse & others & they all looked good. Any suggestions?


Do you have access to a horn wiring diagram for your vehicle? If so, check the applicable fuses for voltage when the horn button is actuated. Even if the fuse is good, if no voltage on the fuse circuit, the circuit is still dead. Use a test light to check voltage.
Check for applicable trouble codes. There is more than one module involved with horn operation. The instrument cluster knows when you hit the horn button then sends serial data message to integrated power module, then the power module sends voltage to horn fuse.
To troubleshoot any modules, you probably need a manufacturer specific scanner to communicate with modules.
The problem could be a hard wired circuit somewhere?

Dec 04, 2015 | Dodge Cars & Trucks

1 Answer

Horn has stopped working on my 2006 Ford Explorer. The fuse seems to be fine. What could be the problem?


I would suspect an underhood fuse, the steering wheel clock spring, or a wiring problem. It's cheap to triple check all the fuses. The other two will require some troubleshooting to figure out. Since the horn works with the keyless entry, the relay, the horn, and its control wiring seem to be ok.

Sep 20, 2014 | 2006 Ford Explorer

1 Answer

Horn stopped


Check wiring connecters to the horn Check fuse. Or even better purchase another horn if above is fine. A good way of checking is remove the connection to the horn and place a tester onto the wires and press the horn inside. If there is signal to the horn then replace the horn.

Aug 13, 2013 | 2002 Land Rover Freelander

1 Answer

Doger charger horn trun signel wiper quit working 2008 6cel


All of these functions are controlled by the totally integrated power module (TIPM) so the first thing to do is check 30A fuse 10. Next, check 10A fuse 30 in the power distribution center (PDC). Power passes through the steering control module and the right steering switch to the horn switch. Pressing the horn switch sends a signal through the right steering switch and the steering control module to the TIPM which applies 12 volts to the horns, causing them to blow. If all fuses check good, the problem is in the other circuitry.

If fuse 10 in the TIPM is good, operation of the turn signal switch should cause the turn signals to flash.

If fuse 10 in the TIPM is good, check 5A fuse 35 and 10A fuse 30 in the PDC. If all fuses are good, the wipers should work.

Sep 11, 2012 | Dodge Cars & Trucks

1 Answer

Horn and stop lights stoped working. They must have a common wire conecton point? Fuses are good bulbe are good stop llight swithc is good. ??Where can I check next?


Hello: The stop lights Wiring goes through the signal light switch also the horn wire comes through the steering column. check under the dash to see if any wires aROUND THE STEERING COLUMN ARE DISCONNECTED.

Oct 13, 2011 | 1992 Isuzu Trooper

1 Answer

Hi.my horn stop working.i check fuse and relay and its seems ok.mechanic told me to check sterring wheel.can someone tell me what to do?


Yes, on the steering handle there is the wire which is maybe not connected to the terminal. when you press the horn wire is not sending a signal via relay or directly to the horn.

Aug 16, 2011 | 2006 Ford Focus

1 Answer

Keyless entry doesn't work, batteries good in transmitter,fuses good


there is a tester that checks for Rf signals from your remote. if the batteries are good, you should get a strong signal from it. most likely the remote went bad

May 09, 2009 | Dodge Dakota Cars & Trucks

1 Answer

There is no sound from the horn when I press on the horn in the steering column or when I hit the panic button on the keyless entry remote. I have checked the fuse and it is good, also have checked the...


my keyless entry has been working great we went on vacation. it quit working i cheched the fuses and the battery in the remote everything is fine just does not work anymore

Jul 22, 2008 | 2005 Ford Escape

2 Answers

2002 Ford Focus wagon remote keyless entry system


Driver door module is where to look also a broken or corroded wire and if you use your key to punch in the door code then the key pad has a hole in it or it just went bad it's not the remote control also check the master door lock switch for corrosion at the pins and the plugs same with the driver door module

Aug 15, 2017 | 2002 Ford SVT Focus

Not finding what you are looking for?
2006 Cadillac CTS Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

80339 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...