Question about 1996 Chrysler LHS

1 Answer

Need help lining up the timing belt on my 1996 chrysler lhs

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,011 Answers

The cams have arrows or lines on them line each cam between the 2 dots on the housing. O n the crank there is a dot line it with the arrow.on the housing by the crank pulley.

Posted on May 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of the EGR value 1996 Chrysler LHS


  • EGR valve for a 1996 Chrysler LHS

    Passenger side near the firewall. Look for a piece of plastic clipped to a metal bracket and the plastic will have EGR on it. This is a two piece system, follow the hoses for the other part. hope this helps .

Jun 28, 2012 | 1996 Chrysler LHS

1 Answer

Need to know which is number one cylinder on chrysler lhs 1996. also, how to get timing belt lined up after replacing water pump.


Due to limited size of pictures, I will send 3 separate posting for your needs. Hope this helps.motor1258.jpeg

Jun 03, 2011 | Chrysler LHS Cars & Trucks

2 Answers

I change my water pump now my timing is off


You didnt get the pulley/sprockets lined up when you replaced the pump. There are dots located on the pulleys that line up with dots machined into the case. See pictures below.

timing-belt-chrysler-v-engine-1.5-120x120.jpg


timing-belt-chrysler-v-engine-1.6-120x120.jpg




Feb 18, 2011 | 1996 Chrysler LHS

2 Answers

How do you replace the oil pump on a 96 chrysler lhs 3.5l


you need a haynes repair manual to show you photos how to remove timing belt and tensioner.and the crankshaft sprocket and vibration damper puller and installer.

Dec 01, 2009 | 1996 Chrysler LHS

1 Answer

96 Chrysler LHS heating up w/new thermo,fans,pump


check that it is not up side downmight need new radiator

Oct 31, 2009 | 1996 Chrysler LHS

1 Answer

Program remote 1996 chrysler lhs


Setting in the car remote in hand turn the key on and off ( don't start the car ) three times within 5 seconds. Now press the door lock button until the doors lock and stop it should now work.

Oct 03, 2009 | 1997 Chrysler LHS

2 Answers

How do i get the timing belt back on my chrysler lhs 1996


YOU NEED TO COMPRESS THE BELT TENSIONER IN A VISE STICK A PAPER CLIP IN IT TO HOLD IT IN UNTIL YOU GET TIMING BELT IN PLACE.THEN YOU PUT TENSIONER IN.DONT REMOVE PAPER CLIP OR UNLOAD IT UNTIL YOU GET TIMING MARKS ON CAMSPROCKETS AND CRANK SHAFT LINE UP RIGHT.IF YOUR BELT TENSIONER IS THE ORIGINAL I WOULD REPLACE IT.YOU ALSO NEED A MANUAL.MAKE SURE TIMING MARKS IS RIGHT.IF NOT YOU GOING TO HAVE VALVES AND PISTON DAMAGE.

Aug 10, 2009 | 1996 Chrysler LHS

1 Answer

1996 Chrysler LHS not firing


First, check the ECM fuse in the power control module (it will be a yellow 20 amp fuse). Second, check the timing belt. You can pull out the cam sensor and look in the hole while someone cranks the motor. If the cam gear is not turning, the timing belt is broken. VERY IMPORTANT - when replacing the cam sensor, get a special adhesive pad from a Chrysler dealer that attaches to the bottom of the sensor to set the proper gap (cost about $2). Install the cam sensor until the pad touches the gear and tighten down the locking bolt. The pad will wear off in normal running. If the gap is not set correctly using this gapping pad, you won't start.

May 12, 2009 | 1996 Chrysler LHS

Not finding what you are looking for?
1996 Chrysler LHS Logo

Related Topics:

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...