Bluetooth hyundai when my phone tries to pair with bluetooth it says the code is 0000 and enter it with your phone ..I do that and it just continues to search and never goes any farther. Am I doing something wrong ?

Hi
Normally when you try and connect or pair your device it normally ask for code. mostly its 0000 or 1234

thanks

The best solution you'll get from books at www.reliable-store.com

These are books containing info on repair, service, troubleshooting, parts info, assembling dissemble, removal, error/fault codes, wiring diagrams and everything on any vehicles cars, at v, trucks. forklifts, boats, excavators etc

Hi Douglas.

1. Switch on BlueTooth on your keyboard.
2. Enable BlueTooth on your iPad.
3. Search for devices on your iPad.
4. Press button if available on keyboard to get discovered.
5. Select keyboard when shown in devices list.
6. Enter pairing code sometimes 0000 or 1234.
7. Use and enjoy.

Hope this helps!

Here is the Apple site instructions:
Using Bluetooth headsets and keyboards with iPad

Here is another that explains how to do it on a MAC, might give you some clues as well:
Bluetooth How to set up your Apple Wireless Keyboard

Here is a good independent site, maybe start here:
iPad How to pair connect any bluetooth keyboard

If you prefer to watch how to do it on YouTube:
How to Connect Pair Bluetooth Wireless Keyboard to your iPad

you can find many codes on yahoo. just enter the search information with the model number of your devise .although it has also been my experience that the default code is 0000 "4" zero's

Usually the pin is either four didgets ex> 0000 or the last four numbers of your cell phone number I suggest you try both of those

hi.i have work at a hyundai dealer during 6 years and your problem is the radio.the bluetooth module in radio must be replace under warranty.if you already remplace radio maybe its your phone but most of the time its the radio

Hi,

The bluetooth on car is not compatible with your phone.
Usually Nokia phone, can connect easily to other device in bluetooth pairing, so can try with this phone brand.

regards

Did you try just pressing enter (no code)? If not, try "0000" I found something here: http://fordfcsd.wunderman.be/UK/Audio%20-%20Multimedia%20-%20Navigation/Bluetooth%20%26%20Voice%20control/bluetooth%20%26%20voice%20control%20%28cg3504en%29%2001-2006.pdf which indicates "0000" is the code, but enter should do it

I erased all information on my old phone and re-entered new info. Very simple.

When u want to pair your bluetooth phone the first time, you must do this in the first 30 seconds after ingnition. This is the only period your audi bluetooth carkit is in search mode. Follow these steps to make it work:

Put your bluetooth phone in search mode, then start your car. Your phone will now detect something like AUDI UHV-1 or similar. Connect to this device, and enter either code 1234 or else code 0000. Your phone will then connect. Command your phone to keep the Audi device listed as a save connection, which can automatically connect. The next time you enter your car it will connect by itself (after ignition that is).