Question about 2010 Ford Transit Connect

Open Question

Fault codes p1178 cleared - 2010 Ford Transit Connect

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My Mitsubishi colt automatic car runs fine but light comes on fault code 1867 I cleared fault but as soon as you switch off engine and back on again the light stays on again

How did you clear the fault? By using a code reader and clearing it or by disconnecting the battery? That only erased the fault from the ECM memory. That fault code is specific to Mitsubishis, so I have no idea what it means. But if the problem that set the code originally has not been corrected, it will set the code (and turn on the light) as soon as you try to use the car again.

Feb 11, 2017 | Mitsubishi Colt Cars & Trucks

1 Answer

I have a 2004 Hyundai Santa FE 3.5L engine GLS model. Check engine light came on and is giving me ODB codes p1118, p1178 and p1195. Issue is the car will not accelerate, it will go idle speeds no matter...

It seems not all cylinders are firing, hence loss of power. Checking and changing sparkplugs may help but i suggest you take it to a mechanic because the computer will have to be reset accordingly.

Nov 04, 2013 | Cars & Trucks

1 Answer

This Greg thanks . how do I clear the code?

Clearing Codes

Stored faults should only be cleared by use of the DRB-II or similar scan tool. Disconnecting the battery will clear codes but is not recommended as doing so will also clear all other memories on the vehicle and may affect driveability. Unplugging the PCM connector will also clear codes, but on newer models it may store a power loss code and will affect driveability until the vehicle is driven and the PCM can relearn its driveability memory.
The -ERASE- screen will appear when ATM is pressed at the end of the stored faults. Select the desired action from ERASE or DON'T ERASE. If ERASE is chosen, the display asks ARE YOU SURE- Pressing ENTER erases stored faults and displays the message FAULTS ERASED. After the faults are erased, press ATM to return the FUEL/IGN MENU.

Sep 29, 2013 | 1993 Jeep Grand Cherokee

1 Answer

Check engine light on with code p1178

check local dealer they should tell you what it means for free
shod but all dealers are a bunch of rip offs

Aug 07, 2013 | Cars & Trucks

1 Answer

9@how to fix dtc p1178 and p1118 on a 2002 hyundai xg350

I live in Australia & have a Hyundai Grandeur XG 3LT V6 2002 model (US equivalent is Hyundai XG300).
Fault codes are P1118 (ETS motor fault) & P1178 (ETS motor battery voltage open). An intermittent fault.
The first code denotes general area of the fault & the second code denotes the specific fault.
So the specific fault is that the ETS-PCM computer is not receiving 12V on pin 2 with ignition on.
'Check engine' light remains on & car is in 'limp home mode' with very little power & poor performance.
I had purchased the Hyundai service manual online (ebook about $8) for the US model. Could not find any
manual for the Australian model. On page FLA-52 found the block diagram for the whole ETS system.
I am a retired electrical engineer so now it became easier for me to find the fault.
There are 2 computers behind the center console. PCM & ETS-PCM.
Pin 2 of the ETS-PCM should have 12V present when ignition is on.
In fault mode 12V was not present. This 12V is supplied from ETS 15A fuse (fuse box under dashboard)
via a relay (i will call this relay the ETS relay). The 15A fuse was OK but the 12V was only
intermittently being passed through the relay points. Relay is located near ignition switch on a
sub panel which has about 6 relays on it. ETS relay was at right bottom corner of sub panel.
Yellow wire feeds the 12V (which is always present even with ign. switch off) to the relay points.
White wire is the output wire from the relay points which feeds 12V to pin 2 of the ETS-PCM computer.
Measure if 12V is present at white wire when ign. switch is turned on (no need to start engine)
I only had the 12V present intermittently. So pulled out the ETS relay - tested contacts with
ohmmeter & found to be only making contact intermittently when relay lever depressed
- removed relay case by grinding away one corner of the case - cleaned the relay points with fine sandpaper.
replaced the relay case & taped with black insulating tape to keep out dust. Tested relay with ohmmeter & points
now OK. Fault is now cleared & car is operating normally.
Also had previously purchased on Ebay a Can OBD11 scanner for $15 which read the fault codes OK.
Hope this helps other people with similar problem.

Mar 15, 2011 | Hyundai Motor 2003 XG350

1 Answer

How do i reset service light

The light is indicating a fault. The computer stores the faults codes, and a scanner can extract the codes and clear them, if desired. Recommend you get the codes before clearing them.

If you have already obtained the codes and effected repairs, the system will rerun diagnostics as you drive and will clear any fault codes that are no longer detected.

If you have more questions, please let us know.

Sep 29, 2010 | 2003 Volkswagen Passat

2 Answers

Need to know what these code means p1118,p1110,p1178

Hi Friend:

In checking your Codes heres the Data.

#1) P1118 -->> this code is sending a signal that your ETCS =Throttle Motor is Either Damaged or it has Failed.

#2) P1110-->> this code is showing that your PCM (Control Module) has received a Signal that your you have a problem with your Throttle Body.

#3) P1178-->> this Code is Indicating that Your Electronic Throttle Motor Battery has a Open Circuit.

Sir, I would start checking your Fuses before you Spend a Bunch of Uneccessary money. It could be that your ETCS Fuse is blown, This could be causing All these Codes.but theres is still a chance that you'll get a Code after changing the ETCS Fuse.

Note: you have Fuse Blocks inside your Vehicle and Under your Hood as well, They'll be Labelled Fuses and Relays.

I hope this Fuse solves ALL your Problems sir.Please let me know how my Solution has helped you by Voting for me and a Testamony would be Appreciated.

Thank You for Using FixYa From: d_hubbs

Aug 17, 2010 | 2004 Hyundai Santa Fe

1 Answer

1996 jaguar xj6 dtc test code p1178

Fault code P1178Rich Fuelling Trim, Long Term (AMFR)Check for manifold air leaks, rectify as necessary Check for recorded MAFS fault code, rectify as necessary Clear fault code and perform service drive cycle to verify fault cleared Contact Jaguar Service Hotline if fault still present.

Taken from the Jag service manual.

Feb 26, 2010 | 1995 Jaguar XJ6

4 Answers

Trouble codes P0172 and P1128 - VW Beetle

The code P0172 means...system too rich(cyclinder bank No.1)..and all of the OBDII fault codes begin with a "P0"..i dont know what a P1128 is....i hope this will help you

Jun 28, 2009 | 2000 Volkswagen Beetle

Not finding what you are looking for?
2010 Ford Transit Connect Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers


Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides