Question about 1994 Mazda 323

3 Answers

Wont start after driving when engine hot but starts fine cold

Mazda 323 wont start when hot but starts fine when cold.After driving have to wait until completely cold until able to re start

Posted by on

  • atseagrove May 22, 2009

    My 1999 323 does the same, starts cold but won't start again for a few hours. It turns over but is not getting spark. Have replaced knock sensor but no difference.

  • wendyaustin May 23, 2009

    wont turn over












×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Crank shaft positioning sensor!!!!!

Posted on Sep 21, 2011

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 88 Answers

Wont turn over or wont run

Posted on May 21, 2009

  • john dobbs May 23, 2009

    turn on headlights if they look bright then you have a bad starter the armature swells when hot and drags hope this helps vote for me on fixya ok

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I have a Hatz 2 cylinder diesel engine that wont start. It ran and shut off. Filters have been changed still no start. Will run on eather.

Posted on Dec 23, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Mazda 323 1985 runs fine when cold after the car heats up it will randomly die. Just cuts out completely. Won't start straight away but after 30sec it will start like nothing was wrong. Then it will...


This is going to be tough to fix. Chances are its a relay or the ignition module, but until it gets to where it will not start for several minutes or not at all, you won't know if you have fixed it or not.
Something is getting hot, cooling off, then getting hot again.

Jul 07, 2013 | Mazda 323 Cars & Trucks

1 Answer

I have a 1196 mazda 323 Astina and I am having problems with it stopping while driving? When it is cold it starts again but keeps stopping when the engine gets hot? do you have any suggestions as to what...


sounds like you have a blown head gasket and possibly warped cylinder head. the reason it happens while its hot is because metal expands under heat and this makes the cylinder head leak even more and you eventually loose compression inside your cylinders and this is why the car stops. a compression test will confirm this and there may be other damage that cant be seen until the head is removed from the engine and inspected by a machine or engine shop.

Mar 05, 2011 | Mazda 323 Cars & Trucks

1 Answer

Changed alternater belt but heater wont push out hot air when driving but does push heat out when car is stationary


the engine cools when the car is running
check the radiator fan does it run when the car engine is cold if not
check the thermostat

Feb 06, 2011 | 1994 Mazda 323

1 Answer

Car stalls in traffic on a hot day. it sputters then stalls and would not start until about 15 mins. the car is a mazda 323 with the Z L engin. thank you


try by replacing thermostat and the radiator pressure cap, this may be just the fix! make sure coolant level is fine. it sounds like it has to cool down for at least 10-15 minutes before restarting. god bless!!

Sep 16, 2010 | 2002 Mazda Protege

1 Answer

Mazda 323 1,6l,2002model.started jerking while driving and engine died.when cranking spark jump only once on coil for 1&4cyl,second coil no spark at all.bridged apropr.term in diagnostic socket but led...


i have mazda 323 2002 1.3 b3 engine manual transmission in cold engine will starting idling but did not raising 5 to 10 minits and in runnig it will be jerks

Mar 20, 2010 | 2000 Honda Accord

1 Answer

Mazda 323 wont start until cold


If this vehicle has a distributor, try replacing the pickup coil. This should be located under your distributor cap and is responsible for spark. When your engine compartment gets warm from normal conditions, this plastic piece of **** shrinks and the metal tab attached to it doesn't make a good enough connection to conduct the electric spark to your plugs. Hope this helps!

May 23, 2009 | 1994 Mazda 323

1 Answer

Battery for 1997 Mazda 323 Astina 5dr hatch


It's fine to use a battery with a higher cold crank rating than original. Consider the rating in the manual to be a minimum requirement. You'll be fine as long as the physical dimensions and terminal placement are compatible with your car. The battery manufacturer's guide should tell you which battery fits your car.

Mar 03, 2009 | 1994 Mazda 323

1 Answer

1991 Mazda 323 carburetted. Accelerating issue


CHECK THE STRAINER ON FUEL PUMP IN TANK

Feb 19, 2009 | 1991 Mazda 323

3 Answers

My 89 mazda 323 turns over but wont start


Last week my 323 89' Mazda stop working as I was driving it in middle of the street, I pushed to the side. it would not start, the starter sounded ok, but the car just didnt start, I checked the fuses, gas pump, and all seemed to be ok, finally with the help of a friend we found out that the ignition rotor at the distributor wasnt working we then replace it with a new one from autozone , is about 5 dollars, now it works just fine, big problem easy solution.

Victor

Dec 01, 2008 | 1989 Mazda 323

Not finding what you are looking for?
1994 Mazda 323 Logo

Related Topics:

3,503 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8560 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...