Question about 2000 Volkswagen Beetle

Open Question

Secondary air pump relay system - 2000 Volkswagen Beetle

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Ad
  • 64 Answers

SOURCE: 97 Jetta Secondary Air Injection System Incorrect Flow

the air pump is located on the engine towards the front of the vehicle and has apx. 3/4 diameter pipes running to and from it. it is apx. 2 fists in size and it is black plastic. one of the lines on top of the air pump runs to the other side of the engine towards the firewall. at the other end of that pipe is the valve. disconnect that pipe while the vehicle is running. no air out of the pipe means bad pump. air coming out of the pipe means bad valve

Posted on Feb 13, 2011

  • 1 Answer

SOURCE: P0411(VAG 16795) secondary air injection system

Had the same problem on an '01 Cabrio. Everything else checked out there were no vacuum leaks or bad wires.

The problem was a 30 amp fuse located outside the engine fuse box under its own cover. Not a regular fuse this one is just a two inch strip of metal. Mine just had a tiny crack in it. I wouldn't have found it if someone else didn't post the same problem on another forum.
hope this helps.


2_10_2013_1_46_22_am.jpg


2_10_2013_1_46_47_am.jpg

Posted on Feb 10, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trouble codes for 2006 ford foucos


p2258 - Secondary Air Injection System Control 'A' Circuit High
Possible causes - Faulty Secondary Air System Relay - Secondary Air System Relay harness is open or shorted - Secondary Air System Relay circuit poor electrical connection - Faulty Secondary Air System Pump

B1934 - Air Bag Driver Inflator Circuit Resistance Low on Squib

B1935 35 Passenger Air Bag Circuit Resistance Low Go To Pinpoint Test K

B2232 - Air Bag Driver Circuit Open - Loop #2 0 ' Add Comment Possible causes - Faulty Clock spring
Possible symptoms - Air Bag Warning Light ON

Dec 16, 2016 | 2006 Ford Focus

1 Answer

Where can I find the fuse and relay for air injector pump on a 2005 chevy trailblazer LS?


AIR SOL - fuse #54 15amp - AIR fuse #56 60amp location under hood fuse / relay box
54
AIR SOL Fuse
15A
AIR SOL Relay, Secondary Air Injection (AIR) Pump Relay, Secondary Air Injection (AIR) Pump, Secondary Air Injection (AIR) Solenoid
55
AIR SOL Relay
--
Secondary Air Injection (AIR) Solenoid

Sep 13, 2016 | 2005 Chevrolet TrailBlazer LS

1 Answer

What does it means p2258 code for 2003 Ford Focus , Smog test Failed


P2258 Secondary Air Injection System Control A Circuit High

http://www.motorcraftservice.com/vdi...f/OBDSM505.pdf

Secondary air systems typically utilize an electric air pump as well as one or two electrically controlled check valves to deliver air into the exhaust manifold.

The only vehicle which uses secondary air is the 2.3L PZEV Focus. The Focus uses a system with ported air. This means that airflow is delivered to each individual exhaust port. The secondary air pump is energized soon after start-up while the fuel system is in open loop and icing conditions are not likely. After the O2 sensors warm up, the secondary air pump continues to be energized while the fuel system goes into closed loop fuel. The secondary air system continues to run in closed loop fuel until the air pump is de-energized. The typical time period in which the AIR pump is energized is approximately 12 seconds.

The AIR pump flow check monitors the HO2S signal at idle to determine if secondary air is being delivered into the exhaust system. The air/fuel ratio is commanded open-loop rich, the AIR pump is turned on and the time required for the HO2S signal to go lean is monitored. If the HO2S signal does not go lean within the allowable time limit, a low/no flow malfunction is indicated. (P0411)

The electric air pump draws high current and must be energized through a separate relay. Both the primary and secondary circuits are checked for opens and shorts. First, the output driver within the PCM (primary circuit) is checked for circuit continuity (P0412). This circuit energizes the relay and the vacuum-operated check and control valve(s). Next, a feedback circuit from the secondary side of the relay to the PCM is used to check secondary circuit continuity (P2257, P2258).

Nov 22, 2013 | Cars & Trucks

1 Answer

Error code p2258


Hope this helps
Trouble Code: P2258

Secondary Air Injection (AIR) System Control A Circuit High
Possible Causes:


AIR relay fault - stuck closed Secondary AIR pump fault - circuit open in motor Open ground to secondary AIR pump Open AIR monitor circuit between the secondary AIR pump and the PCM Short to voltage in the AIR relay to secondary AIR pump voltage circuit

Oct 15, 2012 | 2004 Ford Focus

1 Answer

Code P1420 suggests replacing the secondary injection pump relay, where is the relay?


17828/P1420/005152 - Secondary Air Injection Solenoid Valve (N112): Electr. Malfunction Possible Causes
  • Secondary Air Injection Solenoid Valve (N112) faulty
  • Secondary Air Pump Relay (J299) faulty
Possible Solutions
  • Check Secondary Air Injection Solenoid Valve (N112)
  • Check Secondary Air Pump Relay (J299)
The secondary air injection pump relay (J299) is inside the engine compartment, left side, behind air cleaner housing, under a black plastic protective cover you can lift up to reveal it. It's near the brake fluid reservoir beside the odd black plastic cover for the wiring harness beside the shock absorber tower.

Rating my suggestion let's me know how helpful it was correcting your problem. Your rating is truly appreciated and would take the very least of time and effort away from you. Thank you

Jun 17, 2010 | 2000 Volkswagen Beetle

2 Answers

Obd code of p0411 on a 1999 ford mustang 3.8 v-6 what do I check to correct


That's s failure of the secondary air pump. It'll have to be changed. It's an emissions component meant to help with cold start emissions. It won't cause engine running trouble but at inspection time you'll fail for smog. Change it before then and you'll be fine.

May 16, 2010 | 1999 Ford Mustang Cobra

2 Answers

Car is choking out and dying. Reads P 0411 code. How do I know if its the motor or just the solenoid valve? How can I check to narrow down what actually is causing the problem? It's on a 2000 VW jetta VR6


16795/P0411/001041


if (window.showTocToggle) { var tocShowText = "show"; var tocHideText = "hide"; showTocToggle(); } 16795/P0411/001041 - Secondary Air Injection System: Incorrect Flow Detected Possible Symptoms
  • Malfunction Indicator Light (MIL) ON
Possible Causes
  • Fuel Pump Relay (J17) faulty
  • Hoses/Pipes to/between Components faulty/clogged
  • Secondary Air Injection Pump (V101) faulty
  • Secondary Air Injection Pump Relay (J299) faulty
  • Secondary Air Injection Solenoid Valve (N112) faulty
Possible Solutions
  • Check Fuel Pump Relay (J17)
  • Check Hoses/Pipes to/between Components
    • Check Secondary Air Injection Hoses/Pipes for Carbonization
  • Check Secondary Air Injection Pump (V101)
  • Check Secondary Air Injection Pump Relay (J299)
  • Check Secondary Air Injection Solenoid Valve (N112)

Apr 28, 2010 | 2000 Volkswagen Jetta TDI

2 Answers

Secondary air injection system malfunction


CHECK AIR PUMP FUSE 25 AMP AND CHECK THE SECONDARY AIR INJECTION PUMP RELAY.IF ALL IS GOOD AIR PUMP HAS A BAD SOLENOID OR THE PUMP IS FAULTY.

Mar 01, 2010 | 2004 Chevrolet TrailBlazer

2 Answers

Code P1413


The code refers to the secondary air pump. This pump helps reduce pollution by injecting air in the exhaust system for up to 30 seconds at cold startups.


Possible causes:
Bad Air Pump. Fix: replace air pump, it is found low, under the battery
Bad Relay (controls the air pump) :
The relay is in the relay box next to the battery. It is the relay in the left upper corner when looking towards the driver.


A detailed picture I took here: http://imgur.com/RCiLL.jpg

Oct 12, 2009 | 2000 Ford Taurus

1 Answer

Vw passat 2000 1.8t front wheel drive


please rate me solved...thanks

DTC P0411/16795: SECONDARY AIR SYSTEM - INCORRECT FLOW DETECTED
Test Requirements
Ensure all fuses are okay, battery voltage is at least 11.5 volts, all electrical accessories are off, A/C is off.
Ensure engine is mechanically sound.
Test Procedure

NOTE
Secondary air system is activated by ECM and blows air into exhaust pipe
upstream of catalytic converter for 100 seconds during a cold start, 41-91°F (5-
33°C). Engine must be cold to perform following test procedure.

1. Ensure fuse and secondary fuse (secondary fuse is 40 amp and is located in fuse holder on top of battery)
are okay. Check hoses and components of Secondary Air Injection System, for damage, loose fit and
improper installation, check vacuum hoses for Secondary Air Injection System. Repair as necessary.
Erase DTC memory. Verify repair. If DTC does not reset, test is complete. Perform ECM relearn
procedure. See TEST DRIVE RELEARN PROCEDURE .
2. Remove engine cover. Disconnect pressure hose from Secondary Air Pump Motor (V101), by pressing
buttons on hose connector. See Fig. 33 . Using scan tool, check Secondary Air Pump Motor (V101) in
scan tool Output Diagnostic Test Mode (Secondary Air Pump Relay activation mode). See OUTPUT
DIAGNOSTIC TEST MODE .
3. Secondary Air Pump Motor (V101) should run in intervals and air should exit pump at hose connection.
If Secondary Air Pump Motor (V101) is okay, go to step 7 . If motor runs and no air exits secondary air
pump motor, replace faulty Secondary Air Pump Motor (V101). Erase DTC memory. Verify repair. Test
is complete. Perform ECM relearn procedure. See TEST DRIVE RELEARN PROCEDURE . If
secondary air pump motor does not run, go to next step.
4. Disconnect Secondary Air Pump Motor (V101) harness connector, install LED test light at secondary air
pump harness connector terminals. Turn ignition on. Using scan tool, activate Secondary Air Pump Motor
(V101) in scan tool Output Diagnostic Test Mode (Secondary Air Pump Relay activation mode). See
OUTPUT DIAGNOSTIC TEST MODE . LED test light at Secondary Air Pump Motor (V101) harness
connector should flash. If LED test light at Secondary Air Pump Motor (V101) harness connector does
not flash, go to next step. If LED test light at Secondary Air Pump Motor (V101) harness connector
flashes, replace faulty Secondary Air Pump Motor (V101). Erase DTC memory. Verify repair. Test is
complete. Perform ECM relearn procedure. See TEST DRIVE RELEARN PROCEDURE .
5. Using DVOM check resistance of Secondary Air Pump Motor (V101) wiring. See appropriate WIRING
DIAGRAM under ENGINE PERFORMANCE in SYSTEM WIRING DIAGRAMS. Resistance should
be a maximum of 1.5 ohms for each reading. Check wiring for short circuit to one another in Secondary
Air Pump Motor (N101) harness connector. Repair as necessary. Erase DTC memory. Verify repair. Test
is complete. Perform ECM relearn procedure.
Secondary Air Pump Motor (N101) wiring is okay, go to next step.
6. Check Secondary Air Pump Relay (J299) and Secondary Air Pump Relay (J299) wiring. See DTC
P0418/16802: SECONDARY AIR PUMP RELAY (J299), MALFUNCTION . Repair or replace as
necessary. Erase DTC memory. Verify repair. Test is complete. Perform ECM relearn procedure. See
TEST DRIVE RELEARN PROCEDURE .
7. Disconnect vacuum hose from Secondary Air Injection Valve (N112) and disconnect pressure hose from
secondary air pump motor, press buttons on pressure hose connector to disconnect pressure hose. See Fig.
34 . Blow lightly into disconnected pressure hose, Combi-Valve should be closed. Connect hand vacuum
pump to disconnected vacuum hose and apply vacuum to Combi-Valve, Combi-Valve should open. If
Combi-Valve opens when vacuum is applied, Combi-Valve is okay. Go to next step. If Combi-Valve
does not open when vacuum is applied, replace faulty Combi-Valve. Erase DTC memory. Verify repair.
Test is complete. Perform ECM relearn procedure. See TEST DRIVE RELEARN PROCEDURE .
8. Check Secondary Air Injection Valve (N112). See DTC P0412/16796: SECONDARY AIR
INJECTION VALVE (N112), ELECTRICAL CIRCUIT MALFUNCTION . Repair as necessary.
Erase DTC memory. Verify repair. Test is complete. Perform ECM relearn procedure.
NOTE: Do not use compressed air to check Combi-Valve.
2000 Volkswagen Passat GLS
2000 ENGINE PERFORMANCE Self-Diagnostics - 1.8L Turbo

Jun 21, 2008 | 2000 Volkswagen Passat 4Motion

Not finding what you are looking for?
2000 Volkswagen Beetle Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8560 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...