Question about 2005 Nissan Titan

Open Question

What's causing the grinding from the 4h on Nissan titan

When the four wheel drive is engaged there is a grinding noise

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
keemo68
  • 1263 Answers

SOURCE: 99 nissan pathfinder 4 wheel drive once put into 4 wheel drive popping noise underneath the vehicle

that sounds like a bad universal joint on the transfer case to the front axle. have that checked out

Posted on Oct 01, 2008

Ad
  • 2 Answers

SOURCE: problems with 4 wheel drive on 04 Nissan Titan

2004 Nissan Titan when using the kick down and the accelerator pedal is about 75% depressed the RMP go into the red zone then drop to about 25K and comes close to stalling. Why?

Posted on Mar 04, 2009

steve_e_uk
  • 1675 Answers

SOURCE: steering wheel makes grinding noise when it is turned

it could be low on powersteering fluid, its just vibrating through the colum so you could check that first, or it could be the steering wheel shroud the plastic that covers the colum behind the steering wheel, take it off and see if it still does it,check fluid first though...hope this helps

Posted on Feb 06, 2010

  • 1206 Answers

SOURCE: 95 nissan 4x4 truck. four wheel drive light comes but does'nt en

the front axles have pinon gear box that the shaft from the transfer case goes to, it has a vacuum hose to it or a solenoid actuator check these for proper function this is how the power is turned on to the wheels.

Posted on Feb 13, 2010

  • 565 Answers

SOURCE: can the four wheel drive actuator freeze up and

yes. sometimes not servicing the differential can cause the actuator to stick in position. either you can or cant put it in 4 wheel. you may have to replace the actuator and service the differential to cure this. hope this helps

Posted on Feb 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wont shift into 4wd automatically or manually


I would say the shift actuator my have gone bad. You should check all your fuses for the four wheel drive system with a test light or voltmeter. If their all good see if you can get your hands on a scan tool to check for a code. A four wheel drive problem may not illuminate the check engine light but the computer may still store a code.

Dec 07, 2013 | 1997 Ford F150 Regular Cab

1 Answer

Imitsubishi shogun engaging 4 wheel drive


no year?
never drive, part time 4wd on pavement, unless said pavement
is ice or snow covered.
only AWD allows pavement (tires direct upon) driviing.
part time 4wd is for offroad , off pavement driving,
this is because 4wd has no center differential.
http://en.wikipedia.org/wiki/Four-wheel_drive

and with out such, winds up the drive line fast. and breaks it.

wiki states (no year stated by you)
Part-time four-wheel drive was standard on all models. to 1991
then came
ActivTrak 4WD
cept
4H (high-range full time four-wheel drive), 4HLc (high-range four-wheel drive with locked center differential) and 4LLc (low-range four-wheel drive with locked center differential
so do not use LOCKED on pavement. on active track. only 4H
the wiki states the Super-select is retained 2006 to present.
Super-Select 4WD II

read the glove box manual under 4wd

Oct 16, 2013 | Cars & Trucks

1 Answer

4 wheel drive is slow to unlock


I always back up 15-20 ft.,to disengage four wheel.Nissan titan

Oct 23, 2012 | 2004 Nissan Titan

1 Answer

What is the horible noise when four wheel drive is engaged?


problem cv joints and or "U" joints and or worn slip joints in drive lines
no make model year listed so impossible to know exactly

Mar 27, 2017 | 2002 Nissan Xterra

2 Answers

Have a gmc 2005 sierra the 4x4 doesn't work. when I press the 4x4 button blinks a few times,and then makes like grinding sounds,it sounds that is coming from transfer case,but never engage and ligth goes...


Not good! there is a sensor in your transfer case that senses that you are now in four wheel drive if your transfer case does not lock in it will set a code and the light will flash and default back to two wheel drive. check the fluid level in the transfer case and front differential for a sign of internal failure. that is causing the grinding sound.

Feb 05, 2011 | 2005 GMC Sierra

1 Answer

Can the four wheel drive actuator freeze up and cause the four wheel drive to not engage ?


yes. sometimes not servicing the differential can cause the actuator to stick in position. either you can or cant put it in 4 wheel. you may have to replace the actuator and service the differential to cure this. hope this helps

Feb 04, 2011 | 2004 Nissan Titan

1 Answer

Right side will not go into four wheel drive. I have the manual shift in the floor. Left side engages--right won't.


Sounds like an issue with the IWE gear ( spring ) not engaging.

The IWE ( Integrated Wheel End ) is vacuum & spring operated. When the truck is running and in 2WD, vacuum is applied to the IWE, and holds the IWE gear out. Once vacuum is removed ( placed into 4H or 4L or turn off ) the vacuum is removed, and the spring pushes the IWE gear into place, locking the wheel to the front axle.

Could be a plugged vent line, you can start by removing the vacuum line from that side, and the vent line ( same vacuum line, just routes into the engine compartment, and is not connected to anything ) and see if the IWE will engage.
If the spring seems to move, but the wheel is not engaged, you would need to take it apart to confirm if the IWE spring or the gear itself ( worn down from part engagement ) is the issue.

This is a block diagram of the IWE system
351b3e5.jpg

There was a TSB on the IWE solenoid, where water could get into the system, and cause the IWE gear to be part engaged, causing the gears to be ground down ( you would have heard a grinding noise in 2WD ).
This is the TSB
http://my.voyager.net/~sscully/file_tsb06_08_15.pdf

Oct 18, 2010 | 2005 Ford F-150

1 Answer

1997 Mitsubishi Montero Sport four wheel drive does not engage


take back to dealer ,they should of checked the 4wd as part of the check up.the customer is allways right.

Jan 05, 2009 | 1999 Mitsubishi Montero Sport

2 Answers

99 nissan pathfinder 4 wheel drive once put into 4 wheel drive popping noise underneath the vehicle


that sounds like a bad universal joint on the transfer case to the front axle. have that checked out

Oct 01, 2008 | 1999 Nissan Pathfinder

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...