Some customers may comment that the sunroof will no longer respond to the control switch while in a vented, partially opened, or fully opened position.
A software issue with the sunroof control module may cause the sunroof control module to incorrectly indicate a "closed" position, which may result in no power to the sunroof motor.
Verify the customer concern. If a condition is present, replace the sunroof control module with a new sunroof control module, P/N 15847643. Refer to the Service Procedure in this bulletin.
- Verify the customer concern by opening and closing the sunroof.
If the sunroof will not open , check the power windows.
If the power windows are also inoperative, check the fuse. If the fuse has opened, refer to Corporate Bulletin Number 05-08-64-004 to install 30A circuit breaker.
If the power windows are fully functional, refer to "Power Sunroof Inoperative" diagnostics (SI Document ID# 1392967) in the Body section of the 2005 Chevrolet Equinox or Saturn VUE Service Manual.
If the sunroof will open (or is already open), but will not close , proceed to Step 2.
- Replace the sunroof control module. Refer to "Sunroof Control Module Replacement" procedure in the Body section of the 2005 Chevrolet Equinox Service Manual (SI Document ID# 1196049) or Saturn VUE Service Manual (SI Document ID# 1710479).
- Open and close the sunroof in order to confirm that the customer concern has been resolved.
Sunroof Control Module