Question about 2003 Mercury Mountaineer

Open Question

Mercury Mountaineer, got these three codes: po300, po305, po113, help

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: Mercury mountaineer check engine light help

My 2002 M Mountaineer had the same problem and was fixed by reading the code that showed a leak in the gas tank pressure via the cap. When I replaced this with a good after market cap and drove the car for a while and it cleared itself. A mechanic told me that's not possible, but it did clear and has not lit up except on start up where it lights for a few seconds to test the bulb - a normal function.

Posted on Jul 02, 2010

Crew Dawg
  • 275 Answers

SOURCE: What's your problem? my 2004 mercury monterey

PO 300 is multiple misfires detected
PO 301, 304, 305, 306 are misfires in cylinders 1,4,5,&6
PO 053 is HO2S Bank 1 Sensor 1 Heater Resistance
PO 106 is MAP/BARO CKT Range / Perf
PO 316 is Misfire detected 1st 1000 Revs.

On a misfire, I usually push towards the spark plugs, plug wires, and coil packs / distributor coil.
You have PO 106 and PO 053 that need to be inquired about at nearest AutoZone.
They can give you an idea as to what is the problem on these.

Did a MAP sensor **** out and cause all the misfires ?
Did a misfire cause the MAP sensor error?
You see what I'm saying ?...Something caused all the misfires...thinking MAP...but not that familiar with the function of the MAP.

Hope this helps...

Posted on Aug 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Codes PO300-PO305 TCS and emission lights on, runs OK except sl rough at lower speeds


you have multiple misfire po300 and cylinder 5 po305 misfire.the misfire is causing the rough running.The computer has disabled your traction control.You either have carbon in the EGR which simulates a vacuum leak,bad spark plugs,a leaking intake manifold,or low fuel pressure from a bad pump or clogged filter.
i would start with the spark plugs and fuel filter

Apr 21, 2015 | 2001 Honda Odyssey

1 Answer

Codes for Xj6 p1775,p1157,p1138,po300,po305.i need answers for these codes


related peoblem 02 sensors multiple misfire mis fire cyl 5

Oct 16, 2014 | Cars & Trucks

1 Answer

1998 volvo s70 2.4 glt turbo


code p0102 refers to MAF/VAF sensor ---low input ===causes --wiring short to ground. MAF/VAF sensor
code po172 refers to system too rich --bank 1=== causes ---intake blocked --EVAP canister purge valve---fuel pressure ---HO2S sensor
code po random misfires ---plugs --wiring ---injectors--low compression
code po305 refers to cylinder 5 misfire detected ===causes --engine mechanical fault--ignition/ fuel system ---injector ---ECT/MAF

I would check that the air filter is not blocked first as it affects the MAF/VAF sensors . Have a fuel pressure system pressure test done

Feb 13, 2014 | Volvo S70 Cars & Trucks

1 Answer

What's your problem? my 2004 mercury monterey has eight codes ,po301,poo53,po106,po316,po300,po304,po305,and po306


PO 300 is multiple misfires detected
PO 301, 304, 305, 306 are misfires in cylinders 1,4,5,&6
PO 053 is HO2S Bank 1 Sensor 1 Heater Resistance
PO 106 is MAP/BARO CKT Range / Perf
PO 316 is Misfire detected 1st 1000 Revs.

On a misfire, I usually push towards the spark plugs, plug wires, and coil packs / distributor coil.
You have PO 106 and PO 053 that need to be inquired about at nearest AutoZone.
They can give you an idea as to what is the problem on these.

Did a MAP sensor **** out and cause all the misfires ?
Did a misfire cause the MAP sensor error?
You see what I'm saying ?...Something caused all the misfires...thinking MAP...but not that familiar with the function of the MAP.

Hope this helps...

Aug 13, 2011 | 2004 Mercury Montery

1 Answer

I have a 99 malibu with a 3.1L engine. my check engine light came on and then started to blink, after scanning the car with a code reader it showed a PO300, PO113, and P1404. after reseaching the...


the flashing light is telling you the engine is miss firing, not that there is fuel in the exhust a miss fire is the only thing that will cause the light o flash the P0300 is a random misfire so i cant tell you witch cylinder but replace the coils that should take care of it....good luck

Jul 29, 2011 | 1999 Chevrolet Malibu

1 Answer

My 2002 VW Passet is diagnosing a PO155, PO300, PO301,PO304 & PO305


The 300 codes are misfire codes, do a tune up and that should fix the problem. the 155 i will have to investigate and try to see what it is.

Apr 10, 2011 | 2002 Volkswagen Passat

1 Answer

Autozone reading PO113, PO201, PO204, PO300, PO342, P1627


You may be biting off more then you want to chew.
P0113 is intake air temperature circuit high input.
P0201 is injector circuit malfunction cyl.#1.
P0204 is injector circuit malfunction cyl.#4.
P0300 is random - multiple misfire detected.
There isn't just one reason why these codes came up. A scan-tool is needed to confirm live data and to run some tests to see if these codes are true. some codes come up because something else has malfunctioned.
The intake temp sensor sould be inside the MAF sensor.
You may have more questions, please ask away.

May 05, 2010 | 2000 Daewoo Lanos

1 Answer

Engine light on, codes are PO300, PO302, PO305. what do these mean?


These are cylinder misfire codes meaning ;
P-0300 = RANDOM OR MULTIPLE MISFIRE
P-0302 =CYLINDER #2 MISFIRE
P-0305 =CYLINDER #5 MISFIRE
Check spark plugs, wires, and coil(s)

Mar 31, 2010 | 2006 Kia Sorento

2 Answers

I have 1999 318 4x4 dakota with fault coads


These are misfire codes.This means that your vehicle is missing.The 300 is a random misfire and the 305 is for cylinder 5,and the 306 is for cylinder number 6.Check the plugs if they are good then you could have bad coils.They are top of the plugs.Hope this helps.Good luck.

Feb 25, 2010 | 1999 Dodge Dakota

Not finding what you are looking for?
2003 Mercury Mountaineer Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

fordexpert

Level 3 Expert

5470 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...