Question about 2008 Land Rover Range Rover Sport

Open Question

HDC malfunction warning

Warning lights for HDC malfunction/unavailable, yellow rollover warning light and yellow brake warning light

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75744 Answers

SOURCE: abs warning light stays on no problems with brakes

The brakes will feel fine until u need the ABS, when the light is on the ABS is disabled. You need to have the ABS system tested for trouble codes, if the light is on there will be a code or codes.

Posted on Nov 14, 2008

  • 1 Answer

SOURCE: warning light

Hi The TC light and symbol comes on what is the problem and how can it be solved
Thanks Liz

Posted on Jan 22, 2009

  • 1 Answer

SOURCE: Air suspension inactive, HDC inactive, ABS light on, Range Rover

Air Suspension Inactive usually means there is a problem with the Air Suspension. However, it will also come up when alternator or battery voltage is low, or when you reset (disconnect and then connect) the battery. To reset it manually: while in P(ark), turn steering wheel all the way left, hold few seconds, and then all the way right, hold few seconds. All the warning lights will go out. Most common failure is the passenger front air strut, since batteries are prone to leaking acid, it leaks right on top of the rubber airbag and burns through it. Dealer willcharge you one hour to diagnose, or you can easily diagnose this by looking at the ride height of each particular corner of the truck. If its sits low, or emits hissing sound when you park the truck, its leaking. If you keep driving with leaky air strut, you risk burning up the air compressor, as its working extra hard to compensate for the leak. Replacing the strut is easy 45min job even for a novice mechanic, and you can do it yourself. Strut can be found new for approx $750 online. If you are fed up with air suspension issues, there is a $700 kit that converts the truck to springs, and disables all of the air suspension. Look up Arnott Industires

Posted on Jun 15, 2009

  • 136 Answers

SOURCE: Hill Decent Controll Warning light comes on

throttle switch on gas pedel not closing , check cable free play adjustment at throttle side.

Posted on Sep 03, 2009

  • 51 Answers

SOURCE: I had the brake pad light come on so I changed the

when changing the brake pads you also need to replace the pad sensor that runs into the left caliper in the front. Or the right caliper in the rear.

Posted on Oct 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ive got a 1983 Subaru GL wagon, Automatic trans. non turbo. My problem is that the brake fluid, stop lam, and A.T. Oil temp warning lights on the dash stay on constantly. I noticed that whenand if they...


Yes it may be the wires are shorting or its actually the problem with instrument cluster.
Also get the vehicle scanned for any error codes stored in computer this will confirm whether is short circuit issue or actual problem:------
I suggest you few help links with accurate solutions to refer/go through:----Click the link below:------

Battery and brake Warning lights on Dash
http://alltypesofpartsreplacing.blogspot.com/2012/10/battery-and-brake-warning-lights-on-dash.html
--------------2002 Ford Windstar: Brake Warning Light ON dash? http://schematicsdiagram.blogspot.in/2012/06/2002-ford-windstar-brake-warning-light.html
-------------ABS & Brake warning lights remains steady on dash? http://schematicsdiagram.blogspot.com/2011/12/abs-brake-warning-lights-remains-steady.html
-----------Chevrolet Tahoe Hood open warning on dash and alarm sounds? http://schematicsdiagram.blogspot.com/2011/12/chevrolet-tahoe-hood-open-warning-on.html
-----------2005 Chevy Impala: Service Vehicle Soon Warning Light? http://whoisbyme.blogspot.in/2012/06/2005-chevy-impala-service-vehicle-soon.html -------------- Malfunction Indicator Light ON http://whoisbyme.blogspot.in/2012/06/malfunction-indicator-light-on.html
-----------Car Runs Fine But Check Engine light is ON?

http://whatisbyme.blogspot.in/2012/05/car-runs-fine-but-check-engine-light-is.html

----------
Check engine light with codes P2195 and P2197?

http://howtobyme.blogspot.in/2012/01/check-engine-light-with-codes-p2195-and.html

----------
How to Read Codes from Check Engine Light? http://schematicsdiagram.blogspot.com/2011/12/how-to-read-codes-from-check-engine.html
-------------These will help.Thanks.

Nov 26, 2012 | Subaru Impreza Cars & Trucks

2 Answers

Abs light stays on and a yellow triangle warnng light


On occasion an ABS light will come on when a brake light is out. So check your brake lights first. Your ABS light is on because there is a malfunction in the ABS system. Is your brake warning light and your ABS warning light both on? This would be an indicator of a major malfunction in the ABS system. Stop driving the vehicle and fix this immemorially. If only your ABS light warning light is on this will not effect normal braking but the ABS system is disabled while the ABS warning light is on. You still need to have it repaired but you still have brakes for the moment. Now the code for this fault will be stored inside the ABS memory module. So you pinpoint this with scanner. Hope this helps

Mar 22, 2011 | Volkswagen New Passat Cars & Trucks

1 Answer

I have a 2005 kia sorento and a light came on today next to the fuel it is yellow im not sure what the light means


There are many yellow lights on vehicles. They can be different on the same make and model of any particular vehicle depending on what option packages your vehicle is equipped with. Your best bet is to look it up in your owners manual. If you do not have an owners manual, I offer this advise: On all vehicles with the warning lamps in the instrument cluster, the yellow lamp are advisory lamps. ie. telling you that there is a malfunction with a system or letting you know that certain systems have been disabled. It is usually safe to operate the vehicle with the yellow warning lamps illuminated long enough to get the vehicle to a repair facility. (Check Engine Lights, Airbag Lights, Low washer Fluid Lights, etc.)The red lamps on the other hand, mean that the vehicle is not safe to drive before the cause of the lamp coming on has been resolved. (examples are the red Brake Warning Lamp, The Engine Teperature Warning Lamp, The Oil Pressure Warning Lamp.)
Since you stated the the lamp is yellow, I would say that it would be safe to drive the car to your local repair facility and ask them about it and get a professional opinion of what to do about it.

Jan 15, 2011 | Kia Sorento LX Cars & Trucks

3 Answers

2000 BMW 528i After driving the car for 11 minutes the rear brake warning light comes on. Also, the yellow brake warning light has come on a couple of times as well as the yellow triangle with a curved...


  • Replace rear pads and wear sensor.

Hold milage reset til you see test then toggle through it pro forms test and resets. Check YouTube for further info

2000-bmw-528i-after-driving-omhxih1ixto2jp3w1zwbcvrl-2-2.jpg

Jan 09, 2011 | BMW 528 Cars & Trucks

1 Answer

Does the 1992 dodge dakota automatic trans have a fuse to overdrive button


The fuse number is

#16 - 5 Amp (Tan)

Gauges & Indicator Lights: Low Oil Light, Low Washer Light, Service Reminder Light, Transmission Oil Light, Brake Warning Light, Anti-Lock Brake Warning Light, Fuel Pacer Light, 4WD Indicator Light, Malfunction Indicator Light, Warning Buzzer, Overdrive Switch (1992-93); Transmission Oil Temperature Lamp, 4WD Lamp, Overdrive Module Seat Belt Warning Buzzer
(1994-95).

Jan 25, 2010 | 1992 Dodge Dakota

1 Answer

Little yellow warning light goes on. All bulbs


you most likely have a wrong brake light bulb. if the bulb is a different wattage it will still work but the bulb warning light will still illuminate.

Sep 25, 2009 | 2005 Lexus SC300

1 Answer

The tail light warning light on the dashboard came but the all the lights are working. Is it a malfunction?


Is it a tail light warning light or a brake warning light. If the latter, check your brake fluid.

Aug 10, 2009 | 1997 Lexus ES 300

2 Answers

Warning Light on the dash is illuminated all the time and it says, "BAS ESP"


This is the Brake Assistance/Electronic Stablilty malfunction light, it is the equivalent of an ABS (antilock brake) / electronic suspension control (traction control, rollover control, electronic suspension control) light. It basically means you have a problem in either your electronic ABS, traction control, or some other advanced electronic suspension control problem... Your car is fine to drive like it is, unless you detect some other driveability issue other than the dash light... (99.9% of the time it's something irrelevant and maybe stupid; that's what you get for driving electronic cars...) Your best bet to get rid of the light would be to get the car to an auto shop with a reader that can read ABS/EBS, brake and suspension codes to really find out why the light is on (usually a wheel speed sensor, or something like it...)

May 07, 2009 | 2005 Dodge Magnum

1 Answer

Problem with my cruise control and ABS light on 03 Explorer


Anti-Lock Control —Vehicles Built After 03/2002 The 3-channel anti-lock brake system consists of the following components:
  • front wheel speed sensors
  • front wheel speed sensor rings
  • hydraulic control unit (HCU)
  • Anti-lock brake control module (ECU)
  • rear wheel speed sensor
  • rear wheel speed sensor rings
  • yellow anti-lock brake warning indicator
The 4-channel anti-lock brake system with traction control and stability assist system consists of the following components:
  • active brake booster with integral solenoid
  • brake booster release switch
  • front wheel speed sensors
  • front wheel speed sensor rings
  • hydraulic control unit (HCU)
  • stability assist module (ECU)
  • stability assist event indicator
  • lateral accelerometer
  • longitudinal accelerometer (4x4)
  • rear wheel speed sensors
  • rear wheel speed sensor rings
  • steering wheel position sensor
  • yaw rate sensor
  • yellow anti-lock brake warning indicator
  • brake pressure transducer
  • traction control switch
---------------------------------------------------------------------
I suspect the abs issue is causing the speed control not to work if it happened at the same time the cruise control stopped working. When the yellow ABS light comes on, it means the ABS is dactivated. You may have a faulty accelerometer which senses acceleration and yaw (side to side lean). I have not seen a bad one but you said it is sensitive to acceleration.
I would unplug it and see what happens. The connector should have a small tab to depress so you can pull the connector out.
Here is where it is:

Accelerometer Removal and Installation
  1. NOTE: The accelerometer is located under the center, rear passenger seat carpet. (I think you have to remove seat for access).
    Cut the carpeting along the perforations.
  1. Disconnect the electrical connector.
  1. Remove the nuts and remove the accelerometer.
cd31596.gif
Have dealer hook up tester and pull fault codes if you can't find an easy solution.
Some background info
  • A malfunction in the anti-lock brake system will cause the anti-lock brake control module to shut off or inhibit the system. However, normal power-assisted braking remains.
  • Malfunctions are indicated by the yellow ABS warning indicator in the instrument cluster.
  • The anti-lock brake system is self-monitoring. When the ignition switch is turned to the RUN position, the anti-lock brake control module will carry out a preliminary self-check on the anti-lock electrical system indicated by a three-second illumination of the yellow ABS warning indicator in the instrument cluster.
  • During vehicle operation, including normal and anti-lock braking, the anti-lock brake control module monitors all electrical anti-lock functions and some hydraulic operations.
  • Each time the vehicle is driven, as soon as vehicle speed reaches approximately 20 km/h (12mph), the anti-lock brake control module turns on the pump motor for approximately one-half second. At this time, a mechanical noise may be heard. This is a normal function of the self-check by the anti-lock brake control module.
  • Pedal pulsation coupled with noise while braking on loose gravel, bumps, wet or snowy roads is normal and indicates correct functioning of the anti-lock brake system.
  • Warning Lamp Indicator
    The anti-lock brake system (ABS) uses the yellow ABS warning indicator to alert the driver of a malfunctions in the ABS.
    The yellow ABS warning indicator will come on to warn the driver that the ABS has been turned off due to a symptom that exists in the ABS. Normal power assist braking remains but wheels can lock during a panic stop while the yellow ABS warning indicator is illuminated.

    -----------------------------------------
    Please report back, I am curious if that is what it is. Good luck

    Mar 03, 2009 | 2003 Ford Explorer

    1 Answer

    I have a 2001 hyundai elantra and the warning lights on the dashboard. I know what the oil light looks like and the airbags. What are the other two lights.


    Your best bet is to go HERE and signup for a free account then Downloading your Manual - service sheets, diagrams, parts lists etc.
    Hyundai is one of the best with providing their customers with free information about the vehicles!!

    I have D/L the manual, and the warning lamps on the instrument cluster are...
    Left to right...(starting under temp. Gauge)

    WITHOUT TRIP COMPUTER
    11. Traction Control Indicator Light (If installed)

    12. ABS Warning Light (If installed)

    13. Seat Belt Warning Light

    14. Oil Pressure Warning Light

    15. Charging System Warning Light

    16. Parking Brake/Brake Fluid Level Warning
    Light

    17. Malfunction Indicator Light (MIL)

    18. SRS (Airbag) Warning Light

    19. Trip Odometer/Odometer

    20. Trip Odometer Reset Knob

    21. Low Fuel Warning Light

    WITH TRIP COMPUTER

    7. Front Fog Indicator Light (If installed)

    8. Door Ajar Warning Light

    9. Trunk Lid Open Warning Light

    10. Parking Brake/Brake Fluid Level Warning
    Light

    11. Malfunction Indicator Light (MIL)

    12. Charging System Warning Light

    13. Oil Pressure Warning Light

    14. SRS (Airbag) Warning Light

    15. Cruise Indicator Light (If installed)

    16. Seat Belt Warning Light

    17. ABS Warning Light (If installed)

    18. Traction Control Indicator Light (If installed)

    19. Automatic Transaxle Position Indicator Light
    (Auto T/A only)

    22. Low Fuel Warning Light


    Thanks for using FixYa - a FixYa rating is appreciated!!

    Feb 21, 2009 | 2001 Hyundai Elantra

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    22 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Land Rover Experts

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22114 Answers

    yadayada
    yadayada

    Level 3 Expert

    75744 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8123 Answers

    Are you a Land Rover Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...