Question about 2002 Mazda Tribute
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
When that light comes on, it is indicating charging system problem which could mean alternator not charging for one reason or another like loose belt, faulty alternator, or yes, bad battery or connection at battery, for example. First & easiest thing to do is check all your connections to battery, which you've probably done, and make sure they're tight & clean. Make sure belt driving alternator is good & tight, and in good shape. Now boost the vehicle to get it going & test voltage at battery, after you take cables off. My guess is in your case, the voltage will begin to go down, indicating a bad alternator, that will need to be replaced.
Posted on Jan 17, 2009
Stop in at autozone or similar parts store & get free code scan, then see which way to go from there. Cheaper & faster than guessing.
Posted on Jul 08, 2009
you have a bad cruise cable, this is a very common problem with the tribute. just go to your local dealer and have them replace it for you, it only takes about 30 minutes to do
Posted on Aug 13, 2009
I'm not sure where' the screws are but basically You need to remove the panel on the rear door, then once the panel (interior trim) has been removed you should see a lock mechanism which will be screwed/bolted in place. Easier and cheaper then buying a brand new lock mechanism (unless you want to buy brand new) is going to a wreckers and finding your car model and get it that way (yes it's used but it'll probably save you tons of money vs the dealership) Best Regards.
Posted on Nov 22, 2009
Its the Blower Resistor....If it was the switch, it probably wouldn't work at all....But the Resistor will give you those symptoms, of working on high med or low
Posted on Jan 19, 2010
Tips for a great answer:
Jan 30, 2016 | 2005 Mazda Tribute
Jan 01, 2015 | 2002 Mazda Tribute
Jul 25, 2011 | 2001 Mazda Tribute
May 09, 2011 | 2002 Mazda Tribute
Jul 24, 2010 | 2002 Mazda Tribute
Jun 23, 2010 | 2002 Mazda Tribute
Apr 29, 2009 | 2005 Mazda Tribute
Mar 07, 2009 | 2005 Mazda Tribute
Feb 09, 2009 | 2002 Mazda Tribute
13 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: