Question about Chrysler Sebring

Open Question

Neutral light flashing - Sebring Chrysler Cars & Trucks

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

When i use the indicators the neutral light or brake light flash in time with indicators what is wrong

it sounds like there is a bad ground (earth) someplace in the vehicle .

Sep 14, 2015 | Cars & Trucks

1 Answer

4HI, 4LO and VSC OFF lights are flashing, the ABS and Slip Indicator lights stay on. I was operating in 4Hi earlier and all worked ok. Parked truck for about 2 hrs and then re-started to drive away the...

lot of time 4X4 will engage only in neutral and disengage in neutral. some times switching from drive to neutral and revers will help to disengage. just sake back and for till you feel the 4X4 is off.
Good luck

Mar 15, 2015 | 2011 Toyota Tundra

2 Answers

Why is the neutral light flashing in my 2001 eclipse

When the neutral light is blinking that means you have a problem with your transmissin.

Nov 13, 2014 | 2001 Mitsubishi Eclipse

1 Answer

My mitsubshi Cedia has the neutral light flashing/blinking while on drive, it also lost power

The transmission computer has detected a malfunction. The 'power loss' may be caused by the transmission trying to go into 2 gears at the same time

Jul 23, 2014 | 2001 Mitsubishi Lancer Cedia

1 Answer

2005 Mitsubishi outlander flashing neutral light

with these lights on there could be a lot of different problems. the best thing to do is to take it to an autoparts store and they will scan it for free and tell u the problem.

Apr 13, 2014 | Cars & Trucks

1 Answer

2011 jeep liberty stuck in neutral

Rock back and forth , take it out of AWD , Put parking brake on shift into Park .

Jan 23, 2013 | 2011 Jeep Liberty

1 Answer


The neutral tow kit is nothing more than a LED to indicate that the transfer case is in neutral. I installed my own LED and had the dealership download the program. This is for 2001 - 2005. The tow indicator light plugs into the small green connector under the steering wheel. I cut the connector off and installed straight line wire connectors and hooked it up to the LED. I had the dealer confirm that following the sequence of steps the transfer case was in neutral. Make sure the vehicle is secured (won't roll away)
1. have the engine running
2. put the shift level into neutral
3. turn the key back one position (off but not locked)
4. indicator light wil come on and then turn off
5. press the brake and the 4X4 auto button for about 5 seconds
6. the indicator light will flash 4 times and then stay on
7. release the brake and the 4X4 button
8. transfer case is in neutral

Jun 09, 2010 | 2006 Ford Explorer

4 Answers

I have a 96 wouldnt start by using the ignition key,so i shorted the solenoid and it home and it still wouldnt start,so i did the same thing and it started,then all the warning...

it can be the ignition switch or the neutral safety switch. put the transmission in neutral to see if it will start, if it does then the neutral safety switch is bad. if not then check your ignition switch

Mar 13, 2010 | 1996 Chevrolet Cavalier

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides