Question about Jeep Grand Cherokee

Open Question

Start without key - Grand Cherokee Jeep Cars & Trucks

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to start my 2000 Honda odyssey without a key


You can't . The ignition switch does more than just start the engine. The key code can usually be read from the diagnostic connector.

Nov 20, 2015 | 2000 Honda Odyssey

2 Answers

Start my 2003 Buick century without my key


needs new key switch lock is broken

Nov 23, 2014 | Cars & Trucks

1 Answer

Start without key


You'll have to have the car towed to a dealer, or call a locksmith that has the equipment to do it at your house. The key has to be cut to fit the lock, then the computer has to be programmed to accept the new key code.

Jun 20, 2013 | 2006 Ford Taurus

1 Answer

I lost the keys to my car. without the key it want start. not even turn over. i got another ignition and keys but still want start without the key with the resister pellet.


Yes, this is the vats antitheft system. Your car will not start until you hanger the correct chip key or bypass the system. This link should help

http://vatspasslockpasskeysecurityhelp.yolasite.com/

Nov 16, 2011 | Pontiac Firebird Cars & Trucks

2 Answers

Security light blinks when key is turned to on and will not start, also is the key supposed to be coded? 2003 saturn vue 2.2


Ok to learn the key you have to do what is call 10 minute learn , turn the key to start in attempt to start the car without turning the key off after you do this leave the key on for 10 minute until light goes out, After the security light goes out turn key off for a second or two and then try to start. If you have a new key you have to do a 30 minute learn you have to do the same thing as you did for the 10 minute learn but 3 time try and start without turning key off wait 10 minutes until security goes out then try and start again and leave key on, after you do this 3 time (30 minutes) the 3rd time is where you turn the key of for a second or two before starting.

May 25, 2011 | 2003 Saturn VUE

1 Answer

Lexus rx300 started running without a key.. keys


Check your starter solenoid or your ignition switch, sounds like there is a short causing the car to start when the weather changes

Dec 31, 2009 | 1999 Lexus RX 300

1 Answer

No key for 2001 ford expedition


you can't start the vehicle without taking it in and having a new key programmed to it- you can have a key made- it will unlock it and turn in the ign. but will not start without programming- your ford dealer may be able to get the key code for the vehicle but most likely you'll also have to purchase a new ign. cylinder and have 2 keys made because it takes 2 keys to program after an erase. hope this helps, good luck

May 25, 2009 | 2001 Ford Expedition

1 Answer

My igntion starts without the key being inserted


You need a new ignition key cylinder!

May 09, 2009 | 2000 Buick Regal

1 Answer

Redo code for 2007 Pilot key


ok get in the car, close the door, make sure all doors are closed.... put the key in the ignition, turn the key to on but without starting the car (lights on dash light up only) press and release the key lock button, turn key to off, without removeing the key.. turn to on without starting the car (dash lights up only) press and release the key lock button again, turn the ignition off, without removeing the key then turn back on (lights on dash on only without starting the car, press and release the key lock button , turn off the ignition without removeing the key, ..turn on the ignition once more without starting the car , press and release the key lock button and u should hear the door lock cycle ....leave the key in the ignition ... now press the lock button or unlock button on the other remotes one at a time if u have them.....u should hear the lock cycle indicateing all remotes are programmed.... kind of tricky to explain but you will get it, the sequence of turnin the key in the ignition on and off is only done with that one first key,,, remember after the door lock cyles press the lock or unlock button on the other remote fobs if if any...and ur done..may take u a few trys.. let me know how it worked out.

Apr 06, 2009 | 2007 Honda Pilot

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

511 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...