Question about 2004 Pontiac Montana

Open Question

Remove cup holder drawer below heater/radio face plate to remove faceplate

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

seanpwright
  • 2030 Answers

SOURCE: I have a 2003 Pontiac Montana. I am changing the

Pull the cup holder out, then push it in about 2 inches, then push it DOWN at a 45 degree angle, pull on it and it will come out, then you can get the two screws above the cup holder out.

Posted on Nov 09, 2009

  • 638 Answers

SOURCE: in the cup holder by

sometimes, you can take a long magnetic screwdriver, and go down through the hole, and hopefull it will retrieve your necklace. on most consoles, there should be some screws to be removed in order to remove the console.

Posted on Apr 03, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can undo the trim around the radio of montana 2004 to replace radio of montana 2004 Van


1. Open cup holder and remove (2) Phillips 7mm screws.

2. Unsnap and remove power outlet assembly from lower storage, unplug power outlet wires and put assembly in a safe location.

3. Open lower storage door and remove (2) 7mm screws inside.

4. Models with DVD - Remove DVD player and remove (2) 7mm screws from behind and (2) 7mm screws near the floor.

5. Remove lower storage compartment, put it in a safe location.

6. Remove (2) 7mm screws (facing up) from the cup holder.

7.Remove (3) 7mm screws and remove radio.

Dec 06, 2014 | 2004 Pontiac Montana

1 Answer

How do i remove the stock radio from my 1993 geo metro 4 door hatchback


here is the online fsm quote

  1. Disconnect the negative battery cable.
  2. Open the glove box. Remove the glove box open panel.
  3. Remove the air conditioning switch connector and heater control unit lever knobs. Pull heater control unit cover plate from instrument panel.
  4. Remove the gearshift control lever upper boot and center console.
  5. Remove the ashtray.
  6. Remove the instrument panel center trim bezel and radio face plate.
  7. Remove the screw from the back of the radio receiver and the screws from the front face of the radio.
  8. Remove the radio.

Sep 30, 2014 | 1993 Geo Metro

1 Answer

REPLACE RADIO ;HOW DO YOU REMOVE FACE PLATE; 2002 T&C LIMITED (NOT INFINITY)


  1. Pull open the cup holder.
  2. Pry the little panel above the cup holder off.
  3. There are two screws you can now see. Remove them.
  4. Now you want to carefully remove that panel. There are a few clips that will be removed as you remove that panel.
  5. You will now see some screws holding the radio itself in place. Remove them screws and the radio is ready to be pulled forward.

Regards, Tony

May 10, 2011 | 2002 Chrysler Town & Country

1 Answer

Radio keeps flashing on and off on Ford Focus 2003


If it has a detachable face plate that could be the problem. Remove and clean the contacts. My face plate will get warm if left in the car in the summer and expands, radio flashes until ac cools it down. I remove faceplate and take it with me, put it on when I get back in. Works alot better.

Dec 03, 2009 | 2003 Ford Focus

1 Answer

My radio quit working, how do I go about replacing


remove cup holder remove two philips screws and pull face plate off remove two 10 mm (wrenchsize) screws from radio pull radio out and unpluge wires (face pulls off it has clips )

Oct 24, 2009 | 2001 Dodge Caravan

2 Answers

How do you remove the radio 2001 mitsubishi diamante


Pull out cup holder, remove two screws holding in faceplate, then pop it off. Screws for radio are how visible, remove them and slide the radio out! If you leave it out for more than an hour, you will need 'code' to reset it. (antitheft)

Oct 16, 2009 | 2001 Mitsubishi Diamante

2 Answers

Mouse in my heater , do I need to take apart center counsel, how is this done! And what else needs to come apart.


try setting a mouse trap up as it will become hungry and catch it but if a nest has been built you will indeed need to remove it .to prevent further issues .sometimes they are sheet metal screws others are riveted in but it should be a fairly easy job also the aid of a mirror and a flashlight will allow you to view that which you cannot see in some areas

Sep 08, 2009 | 2000 Pontiac Grand Prix

3 Answers

A dvd is stuck in my Chrysler town and country multi disk dvd/ cd player. How do I remove it?


Look around the face plate for a very small hole...use a straightened paperclip or equivalent and press in a few inches...its a manuel door release and you should gain access to at least the loading tray.

Apr 24, 2009 | 2005 Chrysler Town & Country

2 Answers

Remove stereo from 2003 toyota camry


Hi there :
if you remove the knobs you will see there is some flat nuts that need to be removed remoive them and there should be able to remove the faceplate

Feb 17, 2009 | 2003 Toyota Camry

3 Answers

How to remove the radio


The '94 to '97 Accord is not the easiest radio to remove. Start with the rear console. Two screws on the sides, then open the console pry open the plate at the bottom and remove those screws. Pull the parking brake up. Remove the cup holder insert.  Three more screws to remove. Now the console will unhook from the front console when you pull it up and to the rear.  Remove the ashtray and the screw behind it. Two more screws for the trim plate. Now the radio is exposed. Remember to disconnect the battery so you don't fire the airbags.

Dec 29, 2008 | 1997 Honda Accord

Not finding what you are looking for?
2004 Pontiac Montana Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...