Park assist warning came on.
SERVICE PARK ASSIST
The driver information center (DIC) displays SERVICE PARK ASSIST when the park assist module detects a malfunction in the object detection system and sends a request to the DIC for display of the message. The DIC also displays SERVICE PARK ASSIST when there is a loss of communication with the park assist module.
PARK ASSIST OFF
The PARK ASSIST OFF message is displayed in the DIC when the park assist system is disabled due to conditions that disable or inhibit the system. The red LED in the rear display, as well as, the telltale in the switch will be lit, notifying the driver the PARK ASSIST system is disabled. The object alarm module requests the DIC via the serial data circuit to display PARK ASSIST OFF when it detects that one of the following conditions is true:
The object alarm system is disabled through DIC vehicle customization feature. Refer to the Owners Manual for more information.
An object is attached to the rear of the vehicle, such as a trailer, bicycle rack, or hitch receiver.
An object is hanging out of the endgate.
The park brake is not fully released.
The system receives vibrations from a large nearby vehicle or from a heavy equipment such as a jackhammer.
In the case of objects attached to the rear of the vehicle such as a trailer, hitch receiver, or a bicycle rack, or objects hanging out of the endgate, the rear parking assist (RPA) will have an Automatic Object induced disable feature where the RPA will determine if the rear object is moving with the vehicle. If the RPA detects such a condition, the park assist will be disabled. The PARK ASSIST OFF message will continue to be displayed until the trailer hitch receiver is removed and the vehicle is driven forward above 24 km/h (15 mph).
Feb 07, 2011 |
2007 GMC Yukon Denali