Question about 2005 Dodge Neon

Open Question

Wont go over 25mph

Cam sensor code

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nissan Almera wont start with code P0345


Code 345 means the cam sensor on bank two is not sending the correct signal to the engine computer. So no spark.
If you have replaced the sensor, the problem could be the cam or the wiring from the sensor to the computer.

Dec 03, 2014 | 2005 Nissan Almera 1.5

1 Answer

I rebuilt the TBI, Changed every sensor in the truck and replaced the heads. I still cannot pass the CA smog test


Check everything that is connected to a vacuum line, check the CAT and the injectors and last run a compression test.

Mar 13, 2014 | 1988 Chevrolet K2500

1 Answer

How to diagnose timing belt verses cam sensor wont start and sounds funny when turning over


If it sounds like it has no compression I would vote for the timing belt. Code 16 is for the cam and crank sensors being out of sync, and code 340 is no signal from the cam sensor. Which would happen if the cam is not turning.

Feb 10, 2014 | Cars & Trucks

1 Answer

Got some code wont start


Code 1345 is for a problem with the sync of the crank and cam sensors. Code 1250 is for a problem with the EVAP system that vents the gas tank. And code 300 is for a random miss.
I would have the crank and cam sensors tested first.
It could be a sensor or a problem with the timing belt.

Feb 06, 2013 | 2002 Mazda Millenia

1 Answer

Trailblazer p1345


have read at simular probs here HELP Code P1345 and p0014

Jun 26, 2017 | Cars & Trucks

1 Answer

WONT START WHEN COLD CRANKS FINE. HAS CODE 54 CAM


ok, any obd code means the sensor concerned is not detected by the ecu, or is way out of range of the normal signal the ecu expects. I would therefor check the electrical path between the sensor and the ecu terminals, it may be just a chafed cable or wire.

Jan 14, 2010 | 1997 Dodge Caravan

2 Answers

99 rx 300 run like ****


Have an exhaust shop check it - you probably have a worn out cat converter and or bad O2 sensor(s).

Jul 16, 2009 | 2001 Lexus RX 300

2 Answers

95 lumina ...wont go over 25mph


has the fuel filter ever been changed?

Apr 22, 2009 | 1995 Chevrolet Lumina

1 Answer

My 2003 ford focus 4 cycl stalls after going 25mph


dont think so it could be the throttle sensor causeing the problem hope i have helped you

Apr 01, 2009 | 2003 Ford Focus

2 Answers

After replacing a camshaft position sensor a p1390 shows up


Cam sensor fires the injectors so ignition control is not really what it does. The crankshaft sensor provides spark control, the Cam sensor provides injector pulse timing.
The actual code no it throws is much more use for us to diagnose...pls specify the Engine light code and I can be much more helpful.
Why did u change the cam sensor for an oil leak? that does not seem to be an appropriate repair.... anyhow more info=better help
:)

Jan 17, 2009 | 1999 Mitsubishi Eclipse

Not finding what you are looking for?
2005 Dodge Neon Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...