Question about 2008 Ford Fusion

Open Question

How do you find the SECURITY THEFT FUSE in a 2008 ford fusion

Locate the security theft fuse

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 5 Answers

SOURCE: ALARM SECURITY SYSTEM FUSE BOX FOR FORD ESCORT

Try the batteries in the keyless remote.Then if those are good on the driver side left kick panel. Is the fuse block. on top to the left there is a row of six fuses. two rows of three there should be a cover for it and on the cover there is a indicator on it for the alrm systems. try fuse first. the if thats not it then in the trunk on the right hand side behind the carpet is a box that is held by two #10 screws. take it off and on the box it has two wiring harneses and a antenna looking cable. try the box afterwords though because they are expensive. form ford they are about 400$ . try salvage yards if still no luck i have 3 systems with remotes.

Posted on Oct 17, 2008

Ad
  • 34 Answers

SOURCE: cigarette lighter fuse location

The cigarette fuse is located in the battery junction box under the hood, it is fuse # 10 and is a 20A fuse, open the hood and find the box it is on the passenger side towards the back of the compartment, it is 10th in line on the top row, also you can check these fuses without removing them through the clear plastic top so that should make things a little easier too, hope this helps

Posted on Nov 14, 2008

simpsonite20
  • 100 Answers

SOURCE: 2002 Ford Explorer: Security system prevents car from starting.

Your ignition requires a radio signal from a chip inside your key to start the car . Your car wont start because you are using the wrong key, your ignition is no longer able to read the key (ignition replacement), or your key is malfunctioning.

Posted on Mar 27, 2009

  • 12650 Answers

SOURCE: Failed emissions What fuse for OBD port on 2006 Ford Fusion?

check the out put from the computer to the obd ll port if good need to check the wiring harness ,connections and pin contacts from computer to obd ll port connections possible short,frayed or broken wire

Posted on Feb 14, 2010

  • 82 Answers

SOURCE: 2003 ford taurus security flashes theft then it

The security systems pass lock is disabling the vehicle. This usually happens when the ignition switch does not recognize the ignition key and/or a defective fob or the battery in the fob needs to be replaced. If you ignition key is too worn. This could possibly be your problem

Posted on Mar 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Do you no the number to anti theft fuse for 2004 Chevy caliver


theirs no anti - theft fuse security system wouldnt be one if you could just pull a fuse

Jun 06, 2017 | Cars & Trucks

1 Answer

I need to know where exactly is the fuse that controls the security system in a hhr chevy 2006 is located in the panel. I do not have a owners manual.


Security system ? your vehicle has two ! Content theft and anti-theft that prevents drive away theft ! Is the Security Indicator lit on the instrument cluster ? If the light is on it's not a fuse issue . You need to take or have towed to dealer . Nothing your going to be able to do .
The security indicator on the instrument cluster is controlled by both the VTD System and the CTD System. The security indicator is controlled by the body control module (BCM) via a discrete output.

Dec 17, 2016 | Cars & Trucks

2 Answers

2014 ford fusion engine wont crank after wreck


Ford fusion won't start - YouTube

? 2:01
www.youtube.com/watch?v=H0BhHWT2cyY
Sep 16, 2014 - Uploaded by mlmunoz21
Ford fusion won't start ... Published on Sep 16, 2014 .... 2004-2008 F150 Died Out No Crank Theft Light ...

Ford Fusion won't start - YouTube

? 0:32
www.youtube.com/watch?v=lmH7R6Ebmyc
Jan 9, 2015 - Uploaded by Nicholas A.
Any ideas why it won't start? 2007 ford Fusion awd 6 cylinder. ... And P1260 2007 Ford Fusion - Theft ...

Nov 02, 2015 | 2014 Ford Fusion

2 Answers

No power in my ford fusion


Make sure the cables are connected properly and tight. Check for blown fuses, or loose wire connections coming from the battery to the car.

May 30, 2017 | 2009 Ford Fusion SE

1 Answer

No Crank No Start power to everything one beep when trying to start!! help?! pats anti theft blinking


if anti theft module not communication with scanner or diagnostic hook up then your vehicle will probably not start till thats corrected and clicking sounds like relay from security system opening up and shutting down power for starting system

May 17, 2017 | 2002 Ford Explorer

2 Answers

2000 Isuzu Rodeo (just purchased), anti-theft alarm goes off periodically for no apparent reason. Was going to remove fuse, but it is already gone. How can this be possible, unless someone has bypassed...


THATS WHY THEFT SECURTY ALARM GOING OFF THEFT SECURITY SYSTEM NOT WORKING FUSE IS MISSING.MORE LIKELY THE GUY SOLD YOU THE CAR BECAUSE OF FAULT IN THE THEFT SECURITY SYSTEM, GOING COST TO FIX.

May 30, 2011 | 2000 Isuzu Rodeo

2 Answers

The car wont start, the brake pedal is locked like the anti-theft is active, the anti theft light is flashing when the keys are in the ignition. when i try to turn it on it doesnt turn over, just makes...


TRY REPROGRAM KEY .PUT KEY IN IGNITION SWITCH TURN IGNITION SWITCH ON POSITION 20 SECONDS DONT START ENGINE WAIT 20 SECONDS TURN OFF SWITCH THEN TURN SWITCH BACK ON 20 SECONDS WATCH THE THEFT SECURITY LIGHT BLINKING.WHEN THEFT STOP BLINKING VECHICLE WILL CRANK.IF LIGHT STILL BLINKING.TRY FEW MORE TIMES KEY IN SWITCH ON POSITION FOR 20 SECONDS.MAKE SURE YOU HAVE THE CORRECT CAR KEYS IN SWITCH IF NOT WRONG SET OF CAR KEYS WILL SET OFF THEFT SECURITY SYSTEM.IF KEY RESETTING TRICK DONT WORK.CHECK BATTERY POWER MAKE SURE YOUR BATTERY HAS 12.5 VOLTS AND CHECK SECURITY THEFT FUSE.IF ALL LOOKS GOOD YOUR SECURITY HAS TO BE CHECKED OUT AT THE DEALERSHIP.

Oct 08, 2010 | 2006 Ford Fusion

2 Answers

I need to know which fuse is connected to the security alarm


the security system is not directly fused, so there is no fuse to remove, also removing power to the system in any way will result in a no start condition.

Feb 12, 2010 | Mitsubishi Montero Sport Cars & Trucks

1 Answer

I need to disconnect the anti theft 94 explorer


Refer to the owners manual and remove the fuse for the security system. If there are other necessary features tied into the fuse, then you will need to locate the security system control module under the dash or on the firewall, and disconnect or cut the wires leading to it.

Aug 08, 2008 | 1994 Ford Explorer Limited

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5530 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...