Question about Toyota Tundra

Open Question

How to change the alternator on a 2007 v6 tundra

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is oil filter located on 2011 Toyota tundra 5'7l


Mark, Complete instructions on how to oil and filter change link below.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
DIY Oil Change pics 5 7L

how to change the oil on 2009 toyota tundra

Oil Filter Change Toyota Tundra 2007 2013 2007 Toyota Tundra 4 0L V6

Feb 29, 2016 | Toyota Cars & Trucks

1 Answer

I have a whining noise on my 2007 toyota tundra v6. It happens all the time. What could this be?


If coming from under the hood suspect a worn bearing from idler pulley... alternator... PS pump...AC compressor... tensioner pulley. You will need to remove the belt and spin all pulleys by hand to isolate the noisey one

Nov 14, 2015 | Toyota Cars & Trucks

1 Answer

How do I change alternator in 2007 Camry SE V6. I've removed the belt and appropriate bolts but I'm having trouble removing the alternator from the mounting bracket that connects the top of th


Changing alternator on 2007 camry v6
1) remove cover on top of the rad support.
2) remove air intake pipe that goes to air filter
3) remove hood lock mechanism
4) remove bar that is situated on top of radiator
5) remove electric part from rad fan
6) remove rad fan
7) remove rad hoses
8) remove serpentine belt, remember the route of belt
9) remove two bolts one from top and one from bottom on alternator no14
10) very important that there is a bracket that attaches alternator to the engine block, remove that bracket and take out the alternator from top
Installation, just put everything back
Hope this helps good luck

Nov 02, 2014 | Cars & Trucks

1 Answer

How do I change an alternator On a 2007 Toyota Camry SE V6


Changing alternator on 2007 camry v6
1) remove cover on top of the rad support.
2) remove air intake pipe that goes to air filter
3) remove hood lock mechanism
4) remove bar that is situated on top of radiator
5) remove electric part from rad fan
6) remove rad fan
7) remove rad hoses
8) remove serpentine belt, remember the routine of belt
9) remove two bolts one from top and one from bottom on alternator no14
10) very important that there is a bracket that attaches alternator to the engine block, remove that bracket and take out the alternator from top
Installation, just put everything back
Hope this helps good luck

Jun 16, 2012 | Cars & Trucks

1 Answer

I HAVE TOYOTA TUNDRA 2003 V6, WHAT SERVICE NEED THE A/C? BECAUSE IN THE MANUAL SAID CHANGE A/C FILTER AND IN THE DEALER SAID TUNDRA 03 DOSEN'T HAVE A/C FILTER?


If your A/C has no filter then there is no filter to replace Some manuals are compiled from older cars just updated with new changes.

Jun 22, 2010 | 2003 Toyota Tundra

1 Answer

How to replace alternator on 2007 toyota tundra


Hi. Please see procedure below:

Determine which alternator your Toyota Tundra will need. You'll want to be sure the new alternator is compatible with your Tundra's engine. Models built from 2000 to 2004 have a 3.4 L or 4.7 L engine. Models made from 2005 to 2006 offer options for a 4.0 L or 4.7 L engine. Starting in 2007, the Tundra is available with 4.0 L, 4.7 L and 5.7 L engines.

Disconnect the negative battery cable with a socket wrench. Remove the gravel shield if you need to access the alternator from under the car. Remove the electrical connector and unfasten the retaining nut on the alternator terminal with a socket wrench. This will allow you to remove the battery terminal wire.

Unfasten the lock nut, pivot bolt and adjusting bolt on the alternator with a socket wrench. Remove the drive belt and take the alternator off the vehicle.

Install the new alternator assembly. Use a torque wrench to tighten the lock nut to 25 ft. lbs. and the pivot bolt to 38 ft. lbs. Attach the adjusting bolt.

Connect the electrical harness and battery terminal wire to the alternator and fasten the retaining nut to the alternator terminal with a socket wrench. Install the gravel shield if you removed it. Replace the drive belt and restore it to the proper tension. Reconnect the negative battery cable with a socket wrench.

Thanks!

May 25, 2010 | 2007 Toyota Tundra

1 Answer

Changed timing belt and need to know how to set the timing


For your 2000 Toyota Tundra: I do not know if you have the 3.4L DOHC V6 or the 4.7L DOHC V8.

Click on the following free, direct Link. It has all the Timing Belt Diagrams you will need, complete with Instructional and Directional Diagrams to set your Timing.

Let me know if this helped or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2000/make/toyota/model/tundra/2000_toyota_tundra_timing_belt_diagram_marks.htm

Apr 04, 2010 | 2000 Toyota Tundra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...