Question about 1998 Cadillac Seville
I have a 1888 sts on which the red battery light flicckers on and off when moving away from traffic signals, all the electrical lights go off and on again momentarily at the same time. I have had the a and b ckp sensors replaced but to no avail. Some times the service suspension system message comes on and the TC light comes on too. These will go off when I stop and restart.
My local garage cannot find the fault as there are no error codes for the flickering lights.
Any help would be gratefully accepted.
Sounds like your belt to the generator or alternator is slipping on acceleration.Turn off eng an ck tension by moving belt up and down at point between alt and pully. should not move more than 1 inch. The other lites may be due to low battery level.
Posted on May 15, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: auto theft system
never seen a deville so cant help,but it sounds like a relay is not being controled by the ECU and to locate this fault need special software and again to reset vehicle .sorry i couldnt tell you more know the fault but without dealer software ??i could only rewire to make it work
Posted on Dec 16, 2008
you need to have a pulley puller to get the pulley off if you don't have one most auto zone part stores have a loan a tool program and they can help you with that on most powersteering pumps the high pressure line will be a fitting or bolt on and the return line is usually just a squeeze clamp hope this helps good luck
Posted on Jan 30, 2009
SOURCE: 1998 cadillac seville STS
on my 1998 Deville its located in the trunk. the panel thats is butted up to the back of the rear seat. look for some black nuts around the top of rim of the trunk, they are about 1'' long, these have to be removed first... good luck.....
Posted on Mar 10, 2009
First thing you have to do is list all the codes, because some some might be stored for a long time. Pushing the OFF and WARM buttons together and holding will ghive you all the stored codes. Then press OFF and HI together to clear all codes. Hold and wait for bars or 0's. Now start your car and let it get up to proper operating temps. Take car for aride that aincludes all phases of driving including highway speeds. Observe SERVICE ENGINE LIGHT for coming on . Assuming it does , repeat steps previously provided, read codes stored and repair accordingly. If need be contact me with new codes and I will try to assist you.
Posted on Mar 16, 2009
Tips for a great answer:
Jan 11, 2016 | Cadillac Cars & Trucks
Jul 16, 2015 | Cadillac Cars & Trucks
Apr 06, 2013 | 2000 Cadillac Eldorado
The flasher is hidden under the left (drivers) side of the dash, in the vicinity of the steering column.
Dec 30, 2012 | Cars & Trucks
Aug 05, 2010 | 2001 Cadillac Sts
Sep 29, 2009 | 1998 Cadillac Seville
May 16, 2009 | 2005 Cadillac STS
May 05, 2009 | 1998 Cadillac Seville
Mar 09, 2009 | 1998 Cadillac Seville
Jul 05, 2014 | 1998 Cadillac Seville
69 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: