Question about 2002 Ford Taurus

Open Question

2002 ford taurus

Theft light flashes when key is on flashes once then flashes 5 times then starts again

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 373 Answers

SOURCE: 2005 ford taurus. Remote entry wont work theft light keeps blinking when key is engaged

HI, I'm reading your problem,
Let me explain something about your car.

2005 Ford Taurus, The key on that car has Chip inside of the key and receiver on the ignition switch,
Check if the key you are trying to use is Black and has a plastic head.
If not you need a key with that characteristics.
But if you have the right key, Remenber if you had drop on the floor, or hit with something,
Because some times they come damaged, with insignificat thins.
Remenber if you left the key close to a magnets like speakers.

If nothing aply at your case, you need to call a place Aloha Smith, they have the computer to program or reprogarm your key. IF not you can't start your car.

OK.. I hope this information work for you.

Thank's for submit yous question on fixya.com

Posted on Jul 10, 2008

  • 3 Answers

SOURCE: 2001 ford taurus wont start and anti-theft light is blinking

Either you may be using a key that you had copied from the original or your chip went bad in your original key. Most of cars now a days have the key censor in the key so if it is the incorrect key it will not start your car or if it does not read that chip it will not start

Posted on Feb 05, 2009

chuck943
  • 783 Answers

SOURCE: 2000 ford windstar anti theft light flashing vehicle won't start

This means that your key is not being recogonized.Ethier the chip in the key is bad or the patts transciever at the lock cylinder. Do you have a spare key? If not you will have to get 2 new keyss cut and programmed.

Posted on Feb 16, 2009

emissionwiz
  • 75822 Answers

SOURCE: 2003 Ford Taurus SES wont start and theft light blinking

most likely the fuel pump has failed, have the fuel pressure tested.

Posted on Jun 30, 2009

  • 82 Answers

SOURCE: 2003 ford taurus security flashes theft then it

The security systems pass lock is disabling the vehicle. This usually happens when the ignition switch does not recognize the ignition key and/or a defective fob or the battery in the fob needs to be replaced. If you ignition key is too worn. This could possibly be your problem

Posted on Mar 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 Ford Explorer will not start. Theft light flashes and makes a continuous ping noise.


This happens if you put the wrong key in accidentally. Get into the Explorer and insert the known correct key into the ignition and turn it. If you use the wrong key, such as one that was cut to open the doors, the system will remain armed. If the car then starts, then you have disarmed the anti theft system. If not, move on to this: Ford Explorer keys have large black plastic, or molded rubber, heads. Inside the head is a transponder chip that is programmed to a certain code so that the transponder recognizes the key. When you are sure you have the correct key, try to start the car with the spare, if you have it. If the car still refuses to start, move on to next step here: Wait 15 minutes, until you see the flashing rate on the red light on your dashboard decrease to normal speed and then try both keys again. If this still fails to start the car, raise the hood and disconnect the battery for 15 minutes, then reconnect it and try again.

Jul 18, 2016 | Ford Cars & Trucks

1 Answer

I replaced immobilizer coil . still getting theft light code 11


Reading Ford Immobiliser Codes PATS - YouTube

? 2:00
https://www.youtube.com/watch?v=0kBZeBbb9PM
Mar 31, 2011 - Uploaded by Ask The Mechanic
How to read Ford Immobiliser codes when your car won't start. PATS (PASSIVE ANTI THEFT SYSTEM) http://www.askthemechanic.co.uk. ... and milage appeared, but red light still flashing 1:6 Found Fordwiki, and Youtube, ... a scanner with Body Control software you would get a code of B10D7 for code 11.Missing: taurus

Starting difficulty due to defective anti-theft control module ...

repairpal.com > Problems > Kia > Sedona
2003 Kia Sedona120,000Visitor ... no knowledge of this easily findable problem with the Vehicle Immobilizer Control Module. ... Upvote (11) .... I have replaced the temp. sensor and I am still getting a PO118 code. ... Check Engine Light Stays on since purchase of 02 kia sedona with 89,000 mileage. ... Ignition Coil May Fail.

KCSS-Transportation-Technology - Ford Passive Anti-theft ...



Jan 21, 2016 | 2003 Ford Taurus

1 Answer

THE CAR WILL BE RUNNING FINE,THEN IT WILL SPUTTER/****,THEFT LIGHTS FLASHES,RPM HAND DROPS RETURN TO NORMAL. ONLY WILL IT STOP RUNNING IF I SLOW TO MAKE A TURN OR STOP AT A TRAFFIC LIGHT.. IT MAY DO THIS 2...


elizabethsne, my 2002 taurus just started this today! Have you gotta closer to a fix or is it still doing that?

I'm seeing folks suggesting fuel filter, tune-up, air-filter, and if that doesn't work, possibly a fuel-pump going bad..... i will probably follow that logic to start with, but will keep searching.

thanks.

Aug 22, 2011 | 2002 Ford Taurus

2 Answers

I have a99 mercury mountier with anti theft problems some times it won't start with out resting the system through the door lock click 3 times what's up?


are you using a copy of the original key

you need to use the original key for the car

Antitheft and Alarm Systems: Description and Operation
ANTI-THEFT
The passive anti-theft system (PATS) uses radio frequency identification technology
to deter a driveaway theft. Passive means that it does not require any activity from
the user.
The PATS uses a specially encoded ignition key. Each encoded ignition key contains a
permanently installed electronic device called a transponder. Each transponder
contains a unique electronic identification code, with over 72 million billion
combinations.
Each encoded ignition key must be programmed into the vehicle powertrain control
module (PCM) before it can be used to start the engine. There are special diagnostic
procedures that must be carried out if new encoded ignition keys are to be
configured.
The encoded key is larger than a traditional ignition key. The key does not require
batteries and should last the life of the vehicle.
The transceiver module communicates with the encoded ignition key. This module is
located behind the steering column shroud and contains an antenna connected to a
small electronic module. During each vehicle start sequence, the transceiver module
reads the encoded ignition key identification code and sends the data to the PCM.
The control functions are contained in the PCM. This module carries out all of the
PATS functions such as receiving the identification code from the encoded ignition
key and controlling engine enable. The PCM initiates the key interrogation sequence
when the vehicle ignition switch is turned to ON or START.
The PATS function uses the PCM to enable or disable the engine. All elements of PATS
must be functional before the engine is allowed to start. If any of the components
are not working correctly, the vehicle will not start.
PATS uses a visual theft indicator located on top of the instrument panel. This
indicator will prove out for three seconds when the ignition switch is turned to ON
or START under normal operation. If there is a PATS problem, this indicator will
either flash rapidly or glow steadily (for more than three seconds) when the ignition
switch is turned to ON or START. PATS also "flashes" the theft indicator every two
seconds at ignition OFF to act as a visual theft deterrent.
The PATS is not compatible with aftermarket remote start systems, which allow the
vehicle to be started from outside the vehicle. These systems may reduce the vehicle
security level, and also may cause no-start issues. Remote start systems must be
removed before investigation of PATS-related no-start issues.

The PATs key is used on the following Ford family trucks and suvs:

FORD: 1996-2001 MUSTANG, TAURUS
1998-2000 CONTOUR
1998-2001 CROWN VICTORIA
2000-2001 FOCUS
2002 THUNDERBIRD
1997-2001 EXPEDITION
1998-2002 EXPLORER
1999 F-250 LD
1999-2001 F-150, RANGER, WINDSTAR
2000-2001 EXCURSION
2001 ESCAPE
LINCOLN: 1997-1998 MARK VIII
1998-2001 CONTINENTAL, TOWN CAR
2000-2001 LS
1998-2001 NAVIGATOR
2002 BLACKWOOD
MERCURY: 1996-2001 SABLE
1998-2000 MYSTIQUE
1998-2001 GRAND MARQUIS
1999-2001 COUGAR
1998-2002 MOUNTAINEER

Additionally, PATs can be found on the follow Ford family cars and mini-vans:

1998-up Contour
1997-up Crown Victoria
1999-up Escort
2000-up Focus
1996-up Mustang and Taurus
1998-up Windstar
1998-up 2000-up Lincoln LS
1998-up Lincoln Mark VIII, Lincoln Continental and Lincoln Town Car
1997-up Mercury Grand Marquis
1998-up Mercury Mystique
1996-up Mercury Sable

Following are the instructions for programming a blank key (you must have at least one working key for this procedure).

The PAT

1. Make sure you have both keys.
2. Turn on car but don't start. Watch "theft" indicator untils it goes out.
3. Turn off and repeat procedure with second key.
4. After "theft light goes out, insert new key and turn on.
5. Wait until the theft indicator goes off and then turn off switch.
6. Wait thirty seconds. New key is now programmed into security module. Repeat for any other keys.


1. Erase any old codes by entering the factory code.(buttons will light up)
2. Press 1/2 button within 5 seconds.
3. Press 7/8 and 9/0 buttons at the same time within 5 seconds.

To set new code:

1. Enter factory code (numbers will light up)
2. Press 1/2 button within 5 seconds.
3. Enter personal 5 digit code(decide beforehand) within 5 seconds of each previous one.
To unlock all the doors,press the 3/4 button within 5 seconds of the driver door unlocking.
To lock all doors and set alarm system,press 7/8 and 9/0 at the same time.
To disarm or reset a triggered alarm,just enter personal or factory code.

Do not set a code with five of the same consecutive numbers. It's too easy for thieves to figure out.

Deactivating and Activating Autolock

To deactivate the "autolock":
With all doors and tailgate closed but NOT locked,and ignition OFF.
1. Enter 5 digit code
2. While holding 7/8 button in, press and release the 3/4 button.
3. Release 7/8 button
The horn will chirp once if the "autolock" was deactivated
or two times if "autolock" was activated.

To reactivate the system,repeat steps 1 thru 3

Alternate Method To Deactivate And Activate Autolock

Do steps [1] through [5] (below) within 30 seconds or you'll have to do it over. If you have to do it over, wait 30 seconds between attempts.
Close all doors securely.

1.Turn the ignition key to ON.

2.Press the power door UNLOCK control THREE times.

3.Turn the ignition key from ON to OFF.

4.Press the power door UNLOCK control THREE times.

5.Turn the ignition key back to ON .The doors should lock and unlock.

6.Press the power door UNLOCK control. The horn should chirp ONCE to confirm successful switching of the autolock system

Troubleshooting:

The engine does not start and LED remains off.
1. Check PATS system fuses
2. If alarm is fitted check if LED functions for alarm: if not check cigar lighter fuse (also used for LED)
3. If not go to main dealer

Engine does not start: LED flashes rapidly Leave ignition on until the LED starts to flash a 2 digit code: (sequence- pause-sequence)
Check the following codes:
Code flashes:
1:3 Key code not received. Is key screened by other keys or objects? Try different key: if okay then first key is faulty. If not go to main dealer
1:4 Partial code only received. Try again. If not okay use different key. If not go to main dealer
1:5 Key not programmed into PATS. Program key as above using master
1:6 Faulty link between PATS module and EECV Go to dealer .

Dec 05, 2010 | 1997 Mercury Mountaineer

2 Answers

My Grandmother passed and gave my daughter her


you have a theft system module on board that could possibly be going bad but you will have to have it serviced by the dealer

Dec 23, 2009 | 2002 Ford Taurus

1 Answer

2003 Ford Taurus SES wont start and theft light blinking


most likely the fuel pump has failed, have the fuel pressure tested.

Jun 30, 2009 | 2001 Ford Taurus

1 Answer

My 2002 ford taurus won't start unless i turn key 4 to 7 times


there is also a device called a transponder, it is AROUND the ignition switch and this is the part that reads your key code. thim might be your problem, hope this helps and good luck- P.S. i hope you didn't end up paying for the "repairs" that the mechanics made as they oviously havn't fixed the problem and probably were not correctly diagnosed.

Jun 19, 2009 | 2002 Ford Taurus

1 Answer

On start flashing theft light on 02 windstar


I just had this same thing happen with my Ford Taurus, and it turned out to be a bad key. The repair shop switched back and forth between two different keys we had with us 10 or 12 times, and it always started with the good key, never with the "bad" key. They said if the theft light is flashing quickly, that means the anti-theft system is engaging. If the anti-theft light just lights up, that is normal.

Jul 28, 2008 | 2004 Ford Taurus

Not finding what you are looking for?
2002 Ford Taurus Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...