Question about Jeep Cherokee

Open Question

Freelander L series aux belt pulley diagram - Cherokee Jeep Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

motor1258
  • 6674 Answers

SOURCE: Belt Routing on 1992 Grand Marquis

Try this diagram.9e7be42.jpg

Posted on Jun 15, 2009

  • 484 Answers

SOURCE: 2006 Nissan frontier 4 cylinder belt diagram + tensioner pulley

They are under the hood or on the front crossmember.

Regards,
matt

Posted on Sep 14, 2009

  • 205 Answers

SOURCE: need a diagram to re dit my aux drive belt on 306

If its not the required one then please write your engine code.
http://www.gigasize.com/get.php?d=0zkocl562ff

Posted on Jan 24, 2010

  • 869 Answers

SOURCE: routing diagram for aux belt 2000 s6 4.2

The following diagram will help u with ur anjy834u.jpg

Posted on Jan 13, 2011

patrick_dier
  • 310 Answers

SOURCE: aux belt

aldo it come from, a new in box,it can still be the wrong type.
so i would check if they mach the belt and lock as it says in manuel.
look for macthing numbers.and size.

Posted on Jul 26, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset timing marks after replacing a broken timing belt?


Land Rover Freelander 2002-2005 KV6 Timming belt and ...

? 4:31
https://www.youtube.com/watch?v=sz_oe9tIFH4
Jul 3, 2011 - Uploaded by Jaime Depaula
Land Rover Freelander 2002-2005 KV6 Timming belt andreplacing valves - Video 2 ... shops in North Eastern USA for bent valves and timing belt change? .... Land Rover 200tdiTiming Belt -From Broken Belt to Retiming the ...

ROVER K Series Cambelt Change Video - YouTube

? 10:52
https://www.youtube.com/watch?v=1Qn8ljQKZxA
May 4, 2012 - Uploaded by metalworker007
How to change a rover K series cam belt .. by Technozen of ...soy espa?ol porfavor quiero saber timing marks de MG ROVER 25 petrol 1795cc engen .... Hi, Have a Land Rover Freelander1999 petrol serie K, that dont start, ...

Freelander 1.8i timing belt - Land Rover Technical Archive - LR4x4 ...

forums.lr4x4.com > ... > Tech Archive > Land Rover Technical Archive

Nov 20, 2006 - 1 post - ‎1 author
The following is instructions for replacing the timing (or camshaft) belt on the 1.8i petrol engine, as fitted to a Freelander. This is the K-series ... With the timing set, thecam sprocket marks should look like this. Posted Image

How to Replace timing belt on Land Rover Freelander 2.5 ...




Dec 10, 2015 | 2002 Land Rover Freelander

1 Answer

On all diagrams for the 3.5 03 freelander shows the crankshaft mark on center but piston is not tdc.on side mark it does but cant turn


I'm presuming all the freelander range have the same type of set up for the timing. So when you want to work on your freelander changing cambelt a and stuff you set the timing up on to the marks that you see I front of you but on freelander neither piston is at the top or the bottom infact all pistons should be half way up or halfway down the bores which ever choice you want . But take a look at the crankshaft pulley wheel there is so many little bolts holhing it on four or six I'm not sure. If you undo these bolts and remove the crankshaft pulley wheel hey presto there should be another timing mark on the gear behind the pulley wheel it is this timing mark that will get no1 piston at tdc as the timing on freelanders must be spot on

Feb 07, 2015 | Cars & Trucks

1 Answer

How to replace belt on bmw e60 2006 diagrame


Is the drive belt still fitted? If so draw a diagram of all the pulleys connect the pulleys in your piccy with lines as per your belt run on the engine.There may be an automatic tensioner you will require a tool to operate this You should be able to replace the belt now. Hope this is helpful.

Nov 29, 2014 | 2006 BMW 5 Series

1 Answer

I need a diagram of the routing of the auxillary belt on freelander td4


Look around the engine area for a sticker that shows the diagram.

Oct 19, 2014 | Cars & Trucks

1 Answer

Have the freelanders from 2002 got fitted a chain cambelt ?


Freelander TD4 diesel has a chain (mega bucks), L series diesel (pre BMW engine) has a belt (plus a small belt for the injection pump). the K series 1,8 petrol and KV6, 2.5L also have belt's.

Jun 03, 2014 | 2003 Land Rover Freelander

2 Answers

Where is the exact location of the freelander water pump


front of engine behind cover driven by the timing belt

Dec 21, 2010 | 2003 Land Rover Freelander

1 Answer

How to replace serpentine belt on 2000 saturn L series not ion


Click on the following direct Link. It has the Serpentine Belt Diagram for the L-Series for your specific engine and options (AC/No AC etc.). It has other additonal diagrams for your future use. It also has diagrams on how to rotate/move the Tensioner Pulley/Arm to loosen and remove the Belt.

Standard Rules to Removal the Serpentine Belt:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT OR OPENING (3/8ths or 1/2 inch square opening) rotating it\moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.

Standard Rules for Installing the Serpentine Belt:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.

b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.


Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2000/make/saturn/model/ls/2000_saturn_ls_drive_belt_routing_diagram.htm

Mar 19, 2010 | 2000 Saturn SL

3 Answers

I have to replace timing tentioner pully on a 2002 land rover freelander. before i remove the tension, i need to lock the cams. how do i go about this in order.


If it's the kv6 engine then see my video of the job on an mgzs which has the same engine, so the same job. No special tools required! Cheap if DIY.

Jan 21, 2010 | 2002 Land Rover Freelander

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...