Question about 2004 Land Rover Discovery

1 Answer

I want to connect my cam to the computer with out driver its type is discovery

I want to connect my camera to my computer with out driver it is descovery camera

Posted by on

  • yadayada
    yadayada May 11, 2010

    this is a car repair site.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 58 Answers

In most cases, you can find that your discovery camer does not fit in any of the sockets located in your car.

If you can find such a socket in your car for a camera, please feel free to update this question with your findings!

Now, if you mean that you got this camera with your land rover Discovery vehicle, then connecting the camera to your computer should be as easy as pluging in your USB cable to the computer and running any photo editing program, then using the "import" functionality of your program of choice. If you have a Mac, it is even easier becasue the Mac will, more often than not, recognize the camera and open iPhoto for you, without the need for applying any drivers.

Hope this helps!

Posted on May 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What type transmission fluid goes in 1996 land rover discovery?


You should be able to use Dexron III in a 1996 Land Rover Discovery. Check with your dealer to make sure though.

Nov 22, 2016 | 1996 Land Rover Discovery

1 Answer

My land rover discovery won't start or stay ruuning when it does start


Hello JB, usually cam or crankshaft sensors can cause this problem. My experience has been that when either of these sensors goes bad it just dies and nothing. My question to you is has the cars check engine light come on, and have you retrieved any codes. Please get back to me, GOOD LUCK.

Oct 22, 2011 | 1998 Land Rover Discovery

1 Answer

Landrover 2001 cuts out after 5 to 10 minutes (no spark,no fault lights/warning signals)After 30+ minutes car starts runs perfect for 5 to 10 and cuts out.Help needed, thanks


I just ran into a 2002 Discovery doing the same thing. What ended up being the fix was a cam sensor and crank sensor. That is about all I can say without more information. Hope this helps and best of luck.

Jun 04, 2010 | 2001 Land Rover Discovery Series II

2 Answers

What type of coolant goes in a 1996 land rover discovery? Also what is the ratio?


it is a green coolant from land rover it is ethylene glycol based coolant. mixed 50/50

Aug 13, 2009 | 1996 Land Rover Discovery

1 Answer

I connect a 1997 landrover discovery computer to the 1994 landrover discovery and it won't start.


if it is a mems unit , it will need to be programed to the key fob and alarm . (there is no way round it).

May 21, 2009 | 1994 Land Rover Discovery

1 Answer

Landrover discovery Td300 1998


the rev counter on the 300tdi disco takes its speed signal from a wire connected to the back of the alternator (single spade type connector) this wire usually breaks rewire and should be ok

cruise faults are usually caused by a vacuum pipe splitting check all the vac pipes to the cruise control actuator in the engine bay and at the brake pedal switch of end are split cut off and refit pipe

May 01, 2009 | 1998 Land Rover Discovery

1 Answer

Web cam does not activeate


try uninstalling all camera software first,unplug the camera also.restart computer,when computer is completely restarted reinstall camera software,leave cd in computer restart,after coimputer has restarted plug in camera.this sould work.good luck

Apr 14, 2009 | 2000 Dodge Dakota Quad Cab

Not finding what you are looking for?
2004 Land Rover Discovery Logo

Related Topics:

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...