Question about 2005 Hyundai Tucson

1 Answer

My clutch is making noise how do i troubleshoot the problem

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Change it .buy a borg and beck replacement for around £100 also replace the gasket at the flywheel end and replace the seals on the transfer box the ones to the drive shafts change all oils too the oil in the transfer case and gear box ..its a big dirty job but worth doing .the clutch tend s to fail around 10 years old you will hear a rattle when the clutch takes up drive .thats the pressure plate .parts are not too expensive but it will take around 6 hours to change over

Posted on Jun 06, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Nissan maxima Manuel makes noise but when I push in clutch it stops so I put a new clutch in and it still makes noise


Throw out bearing may be the problem. Check with your Nissan parts supplier for details on how to replace it.

Mar 17, 2015 | Nissan Cars & Trucks

1 Answer

Noise from compressor


loose mounts,? frayed belt? noise sounds like what, (scream or rattle)

clutch engaged or now , look and see? or turn it off. and make sure it is off the clutch free spins, OFF.
if off, and noise still, get a new clutch bearing.
if only noise, with clutch engaged that is pump noise
ever heard of a $5 stethoscope at harbor fright.? get one listen to it.
if only the compressor makes noise its bad, end of life.
sure it makes noise , new. listen 1 one other car, to learn good from bad, takes what 5min?

Dec 31, 2013 | 2002 Honda Odyssey

1 Answer

My 1995 n14 sss pulsar makes a really weird noise when putting the clutch in and changing gear


This noise is due to a part called the clutch release bearing being worn out. You must remove the transmission to replace it.

Jul 03, 2012 | Cars & Trucks

1 Answer

I changed my clutch and releasing bearing but the noise is still there. When ever i release the clutch the noise starts like the release bearing problem and when i take off in first and second gear there...


a release bearing will make noise when you push on the clutch, the input shaft bearing will make noise when you release the clutch, the transmission will have to be removed and torn down to replace the bearing.

Apr 15, 2011 | 2004 Honda Civic

1 Answer

My 95 Camry cant go into 5th gear. I was told that it was the clutch because it was making a grinding noise. I got the clutch fixed but even after that its not taking 5th gear and its still making the...


If the clutch is bad it would make the same noise in every gear, because the clutch does always the same engage and disengage the trans and its different gears. So if there is a noise in a specific gear the problem is the trans-axle ( if the noise is coming from the trans axle.)

Jan 03, 2011 | 1995 Toyota Camry

1 Answer

Leaking hydraulic fluid from clutch, makes a high pitch noise when clutch is engaged.


Your throwout bearing is getting ready to go out. Once the noise stops, you have a very limited amount of time left on your clutch before it eats the pressure plate. Sometimes if you're lucky, the clutch cylinder is just not completely disengaging, and this is making your noise. You'll know this if you can feel it pulling while in gear and the clutch depressed.

Sep 18, 2010 | 1998 Chevrolet S-10 Pickup

1 Answer

Just had new clutch fitted on 02 ford focus 1.6 now making noise but stops when i press clutch down


A couple of things comes to mind, when you press the clutch you disengage the transmission. When the clutch is not pressed the transmission still spins inside even when it is in neutral. Sounds like a bearing inside the transmission is making noise, did they put fluid back in the transmission? Also another common source of noise is the throw out bearing, it is on the input shaft, it is the actual part that presses against the clutch pressure plate, usually though they make noise when the clutch is pressed and quiet down when released.

May 07, 2010 | 2004 Ford Focus

1 Answer

A/C compressor clutch on my 1994 3.1 L Grand AM


You could just do the clutch ,but it could be something else and not the compressor making noise.

Sep 29, 2009 | 1994 Pontiac Grand Am

Not finding what you are looking for?
2005 Hyundai Tucson Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...