Question about Oldsmobile Bravada

Open Question

Reset alarm - Bravada Oldsmobile Cars & Trucks

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i reset the alarm on a 2002 py cruiser


when using key it like house alarm you have a few seconds to enter passcode to reset same with car you have a few seconds to enter and put key in ignition and turn on this resets alarm

Sep 11, 2016 | 2002 Chrysler PT Cruiser

2 Answers

Is there a way to reset the alarm in a 2005 Hyundai Elantra


Bill, alarm reset procedure. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
how do you start disable alarm on elantra with no fob only the key Hyundai...
How to Reset Factory Car Alarm
https://answers.yahoo.com/question/index?qid=20090131072012AAj89Wh

Aug 27, 2016 | 2005 Hyundai Elantra

2 Answers

How to reset anti theif alarm


There are different alarm systems, not same for all kind of cars. You should explain, by the way, what do you mean by "resetting" an alarm.
If you mean that you have an activated alarm and you want to deactivate it some can be deactivated by turning the start key.
Then, some have a hidden button you may press
Finally, some CAN'T be deactivated, only by remote.
You only can turn off the sound removing battery cable then deactivate physically the system and to do this you should know alarm installation techniques.
To change alarm coding you need and electronic tecnician.

May 15, 2016 | Cars & Trucks

1 Answer

Reset factory alarm on a toyota avalon xls 1996


If the alarm system has a battery remove it otherwise removing the car battery for a while may reset it. In emergency contact your local toyota dealers mechanics department and they may be able to help you at no cost.
If you put a general enquiry on google you might get lucky, do not be too specific. i.e. toyota 1994 alarm reset procedure

Sep 19, 2014 | 1996 Toyota Avalon

1 Answer

Car alarm resetting


Have you tried unlocking the drivers door with the key? This is a common way to re-set a factory alarm system. If you have an aftermarket alarm there is often a small toggle switch mounted under the drivers side steering column.

Apr 24, 2013 | Ford Probe Cars & Trucks

1 Answer

How to disable alarm system. The alarm went off


okay, this alarm reset is done by turning the key on and pushing the reset button a few times, you will need to try this a few times to get the correct number of pushes,for example turn key on and quickly push 3 times and if that doesnt work retrey it and push it 4 times, take note that every time you try you need to turn key off and then on again before you push reset button,i know it can be set to 1- 2 -3 or 4 pushes to reset, this is programed at the time of install, most installer dont set it or tell you so you will need to try all four. good day.

Apr 15, 2011 | 1996 Nissan Pathfinder

1 Answer

I have a 1999 jeep grand cherokee. the alarm goes off whenever i open the door if the vehicle has been locked the alarm stops when i start the vehicle i only have a key, no remote any ideas on how to fix...


If ithe alarm is factory when they will have to reset the alarm module with a scanner. If the alarm if aftermarket go to the control module and see if it has a reset button. FOBs (remote) can reset alarm. You Jeep is always set for break-in mode. The FOB sets this when ever the FOB is used to lock the doors. May be bad alarm module - Sorry - Good luck

Oct 17, 2009 | 1995 Jeep Grand Cherokee

1 Answer

How do I reset factory alarm on a 2000 Subaru


you HAVE to get a remote and unlock the car.the dealer may be able to turn it off with the obd2 system,you have to call subaru.

Jul 13, 2009 | 2000 Subaru Legacy

1 Answer

Changed the battery. The alarm went off, tried to reset but will not work. When driving push on the brakes and the car shut down. Is this an alarm issue or an electrical engine issue. Don't know what to...


Yes this is an Alarm issue that's why your vehicle is shutting down as soon as you press on the brake pedal. Is this an aftermarket alarm or stock alarm? Sounds like aftermarket alarm to me and if it is, the way fix this issue is as soon as you put the red n black terminal on the battery and the alarm goes off press your alarm key right away to turn it off. If this doesn't work put your key on the ignition after you have installed the battery and just put it on the "ON" position engine OFF then click on your alarm remote once again.

Sep 23, 2008 | Mitsubishi Eclipse Cars & Trucks

2 Answers

Factory alarm


the only way to reset an alarm is to disconnect the battery cables.

there is no such thing as an alarm reset switch.

My suggestion would be to go to autozone, they sell replacement key pads.

Aug 04, 2008 | 1998 Ford Contour

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...