Question about 2000 Volkswagen Jetta TDI

1 Answer

NO POWER TO AC COMP

NO POWERE TO AC COMP NEED TO LOCATE FUSE OR RELAY
OR MODULE

Posted by on

  • miquinbin29 May 21, 2009

    WHERE IS FUSE NUMBER FIVE LOCATED ALSO

    THE SYSTEM IS FULLY CHARGE DO I HAVE A RELAY

    OR A MODULE BECUSE I HAD A SHORT

  • yadayada
    yadayada May 11, 2010

    how do u know whether or not the system just has no charge?? no charge due to leak and the compressor gets no power. check it

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Fuse #5 is for your ac.

On the Hi/Low pressure switch conection Terminal 1 and 2 are for AC clutch bridge them briefly to see if clutch engage if so system is low on refrigerent.

If you get cold air its more then likely Hi/Low switch is bad.

Note engine must be running and ac fan in on position.

Good luck

Posted on May 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

A/c why my compressor does notwork turn the shaft and turns freely do not get power to it and donot have fuse box identification for the fuses


first you should know that there is an electromagnetic clutch on the compressor and it is going to appear to be free turning unless there is power to it. Second is a switch that is in line with the power to the clutch and that switch opens and wont let power to the clutch if the Freon is low. Third is the fuse that you may be able to find a diagram for at autozone dot come. Make a free account and then login and put in the year make and model and go browse the free repair guides.

Feb 24, 2016 | 1995 Ford Escort

1 Answer

09 dodge 3500 no power to ac comp light comes on on panel


Check fuse and relay first. BBB Industries have diagrams and I will look in a minute as I believe it runs through a control module also.

Jun 22, 2015 | Dodge Cars & Trucks

2 Answers

A/c comp.won't kick on tryed to jump pressure switch still nothing fuse is good 1989 Chevy 5.7 comp.is new


There is also a relay to check. If relay is ok, the compressor clutch or wiring to it may be faulty

Jun 07, 2015 | Chevrolet Cars & Trucks

1 Answer

2000 FORD EXPLOYER: Power windows, dome lights not working which fuse number controls it?


Hello! In the Central Junction Box is fuse # 26 (10A) which powers the Battery Saver Relay...This relay, in-turn, controls the Power Windows, Electronic Shift Module, Glove compartment Light and Cargo light...If the fuse is good, suspect the relay...The Interior Lamp Relay and the Battery Saver Relay are the same...Either one could be at fault if the fuse proves to be good...See photo of relay below...Relay module Above right of gas pedal or lower left of AC/Heater/radio. It is an ugly place (Behind the center console)...

This is a documented fault if fuse #26 keeps blowing...The wiring on the rear of the relay module has a history of shorted and burnt connections on the socket of the Battery Saver Relay...Keep me posted...................Guru............Saailer



saailer_165.jpgSTANDARD MOTOR PRODUCTS Part # RY612...Cost under $10

Aug 30, 2011 | Ford Explorer Cars & Trucks

1 Answer

07 gmc envoy denali ac stopped blowing air, replaced the blower resistor but now still no air comes out, like no powere through... so what next, what module needs replacing?


You have three possible things left, check fuse #35 in the underhood fuse panel, wiring harness going to resistor pack (look for burnt wires or melted connector), or a bad blower motor.

Aug 25, 2011 | 2007 GMC Envoy Denali

1 Answer

I have a 2006 ford explorer, with dual and elect contols, the a/c went out meaning no clutch, checked freon level its ok, checked clutch gap, checked and put all new relays and checked the diode and all...


You may check your fuses and relays you have a AC clutch relay in the battery box that has two fuses feeding it they are also in the fuse box under hood fuses 48 and 24 bothy 10amp fuses. fuse 24 is hot all the time and fuse 48 is only hot when car is running

May 23, 2011 | 2005 Ford Freestyle

1 Answer

2006 chevrolet hd 1500 no ac itseems like its blowing hot air out


Look under the hood on the driver's side there will be a fuse box. On the top cover there is a diagram to find the a/c fuse. If the fuse is good then check the a/c relay. If that is good also then you may have a freon leak. Good luck. Keep me posted please.

Apr 27, 2009 | 2006 Chevrolet Silverado 1500HD

1 Answer

2004 gmc sierra 5.3. AC not working AC Compressor fuse blowing


UNPLUG THE A/C CONNETOR ON THE A/C COMMPRESOR. REPLACE THE FUSE AND TURN ON THE SWITCH. FUSE OK . REPLACE THE COMMPRESSOR AND THE RECIVER DRIER.

Apr 17, 2009 | 2004 GMC Sierra

Not finding what you are looking for?
2000 Volkswagen Jetta TDI Logo

901 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...