Question about 2006 Peugeot 604
Speedo not working on 1999 plate dispatch van. would it be electronic or fuse?
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Citroen C15 Diesel Van.
It definitely sounds like the electrical part of your ignition isn't working properly.When you turn the key, the lck and tumbler turns on the ign. switch in which sends power to the rest of the car.
Posted on Jun 23, 2008
Had this problem on mine & the main dealer were stumped. Eventually found it myself after a lot of pocking about.Have a look at the wiring loom in the engine compartment. Looking under the bonnet look closely on the right hand side of the engine above the gearbox where the wiring loom passes from the rear of the engine over a metal bracket/support to the front. The loom has a tendancy to rub against the bracket and eventually damage the cables within. You will have to remove the air filter canistor & a few air hoses to get to the bracket. Good luck!
Posted on Jan 11, 2010
SOURCE: Does anyone know where is
engine temp sensor is part of your exhaust.
there should be one in the engine compartment screwed in to the exhaust manifold and there there should be at least one more under your care on the exhaust pipe near the catalytic converter. some vehicles also have one near the back of the car past the converter to record exhaust readings but this is usually for trucks and larger vehicles like SUV's and vans. if you are having an issue with your sensor connect a code reader to your car and pull up the error code to find out which sensor is faulty. you should be able to look online for details on which code reference to which sensor, and then just buy a new sensor and replace. advise not trying to clean the sensor as the cost versus possible damage you can cause is worth just getting a new sensor.
tp remove it usualy takes a flat head screw driver to pop off the electrical connector and a wrench to unscrew the sensor from the exhaust. simple procedure with a ending of self satisfaction on not paying 200 $ to have someone to spend 15 minutes to turn a wrench on your car.
Posted on Jul 02, 2011
Tips for a great answer:
Apr 13, 2017 | Citroen Cars & Trucks
Sep 27, 2015 | Citroen Cars & Trucks
Mar 10, 2015 | Citroen Cars & Trucks
Oct 13, 2014 | Cars & Trucks
Apr 09, 2014 | Cars & Trucks
Jan 30, 2012 | Citroen Berlingo Cars & Trucks
Nov 22, 2009 | 2001 Volkswagen Jetta TDI
516 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: