Question about Cars & Trucks

Open Question

Cooland temperature sensor ford f-150 fx4 5.4lt 2010

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mrgreenz
  • 962 Answers

SOURCE: intake air temperature sensor

It is mounted on the intake manifold.Also called a MAT Sensor. Manifold Air Temerature Sensor

Posted on Nov 23, 2008

ZJLimited
  • 17970 Answers

SOURCE: where is the temperature sensor for a ford e-150

1994 Ford Truck E150 1/2 ton Van 5.8L MFI 8cyl Temperature Switch is located: Front seating area, center, under engine cover, front driver side of intake manifold, mounted in engine block.

The ECT sensor (Engine Coolant Temperature Sensor) is located either in the heater supply tube at the rear of the engine, or in the lower intake manifold. The ECT sensor is a thermistor (changes resistance as temperature changes). The sensor detects the temperature of engine coolant and provides a corresponding signal to the PCM. From this signal, the PCM will modify the air/fuel ratio (mixture), idle speed, spark advance, EGR and canister purge control. When the engine coolant is cold, the ECT sensor signal causes the PCM to provide enrichment to the air/fuel ratio for good cold drive-away; as engine coolant warms up, the voltage will drop.

c1fb19f.gif

Engine component locations-1994 5.8L engines

I hope help you with this, good luck (remember rated this help).

Posted on Sep 02, 2009

Sandpiper99
  • 71 Answers

SOURCE: need to located the temperature sensor on 2002

The coolant temperature is measured from the cylinder head temperature sensor CHT and is located on the drivers side cylinder head in the rear. It is connected to the harness by connector C107 and has gray/red and yellow/light green wires going to pins 39 and 55 of the processor.

Posted on Apr 07, 2011

ZJLimited
  • 17970 Answers

SOURCE: where is the temperature sensor located on a ford

The ECT (Engine Coolant Temperature) sensor is located either in the heater supply tube at the rear of the engine, or in the lower intake manifold. The ECT sensor is a thermistor (changes resistance as temperature changes).

The sensor detects the temperature of engine coolant and provides a corresponding signal to the PCM. From this signal, the PCM will modify the air/fuel ratio (mixture), idle speed, spark advance, EGR and canister purge control. When the engine coolant is cold, the ECT sensor signal causes the PCM to provide enrichment to the air/fuel ratio for good cold drive-away; as engine coolant warms up, the voltage will drop.

10_16_2011_1_04_57_pm.jpg

Fig. Unplug the coolant temperature sensor electrical connection to take off.

Hope this helps and keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment.

Have a nice weekend and thanks for using FixYa.
Jose.

Posted on Oct 16, 2011

ercupa190
  • 12223 Answers

SOURCE: WHERE IS THE TEMPERATURE SENSOR FOR A FORD E-150

d3743c02-660c-4b86-81ca-f18aa34f2076.giffollow the diagram for to see . Otherwise go to www.automecanico.com or www.autoelectronico.com and fix it.
GOD BLESS YOU

Posted on Oct 01, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to located the temperature sensor on 2002 ford f-150 4.2


The coolant temperature is measured from the cylinder head temperature sensor CHT and is located on the drivers side cylinder head in the rear. It is connected to the harness by connector C107 and has gray/red and yellow/light green wires going to pins 39 and 55 of the processor.

Apr 07, 2011 | 2002 Ford F150 Regular Cab

1 Answer

Where is the engine coolant sensor located on a 2000 ford f150 V8 4.6 L?


please rate as fixya if this helps

SECTION 303-14: Electronic Engine Controls 2000 F-150 Workshop Manual
REMOVAL AND INSTALLATION Engine Coolant Temperature (ECT) Sensor — 4.6L and 5.4L Removal and Installation
  1. Remove the engine coolant temperature (ECT) sensor.
    1. Disconnect the electrical connector.
    1. Remove the ECT sensor.
ae8a8e7.gif The ECT sensor:
  • sends the PCM a signal indicating engine temperature.
  • resistance decreases as coolant temperature increases.
The ECT measures the temperature of the engine coolant. The sensor is threaded into an engine coolant passage.

Mar 19, 2009 | 2000 Ford F150 Flareside SuperCab

1 Answer

Intake air temperature sensor


It is mounted on the intake manifold.Also called a MAT Sensor. Manifold Air Temerature Sensor

Oct 15, 2008 | 1999 Ford F150 Regular Cab

1 Answer

1984-85 Ford F-150


Hi ,yes it can be the fuel pump ,run a presure test wile hot ,bad fuel pumps also affects cooling,

Jul 23, 2008 | 1984 Ford F 150

2 Answers

89 ford f 150 5.0


you should always start with the basics ,a cap ,rotor and a set of wires to start

Jun 15, 2008 | 1989 Ford F 150

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

422 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...