Question about 2007 Toyota Tundra

Open Question

Flashing 4hi-4lo vsc abs lights - 2007 Toyota Tundra

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 580 Answers

SOURCE: trc off vsc and abs lights on display

Find and press your TRC button this turns the TR-action C-ontrol back on, and should turn off, the V-ariable S-tability C-ontrol light and the A-ntilock B-rake S-ystem light. If it does not rengage have the traction control switch checked

Posted on Jul 09, 2009

  • 1986 Answers

SOURCE: ABS PROBLEM

Look up above your brake pedal and you should see a switch that is connected to it. This switch controls your brakes and in some vehicles, is tied in to the safety system. Change this and see if your van goes into gear ($10 part)

Posted on Sep 09, 2009

  • 2 Answers

SOURCE: brake vsc off and abs lights are on

Krafty930 with brake, VSC off and ABS lights on. You share a common problem with many Toyota owners. My 2003 Sequioa has the same issue. There is no solution. Dealers will replace the air sensors and then the computer all for $2,500 - $3,500. This will not solve the issue. The internet has thousands of complaints re this problem, but Toyota has disowned the issue and declined resolution, even for vehicles under warranty. The lights drive me crazy and I still don't know if there is a functional problem, a wiring problem or a computer problem with the VSC system. To date, I have learned of no reports relating this problem to vehicular deaths, so I really am not holding my breath waiting for Toyota to provide a solution. Sorry that you share this problem, but perhaps my response will help to stop you from "spinning your wheels" too much trying to resolve this issue.

Posted on Mar 04, 2010

WhiteFox4
  • 641 Answers

SOURCE: stuck in 4 LO

Check your transmission fluid level. More than likely it's either low, but since you didn't switch it to 4 low, it's probably a vacuum leak. Remember it should be in neutral to switch back to 2 wheel drive.

Posted on Dec 06, 2011

  • 1 Answer

SOURCE: 2008 Toyota Tundra engine light on, vsc off, 4lo, slip indicator lights came on - what is the problem?

I currently have the same issue on my 2008 Tundra. I have noticed that one of the 12v acces plugs don't work. The problem is intermittent and started when the air was damp or after it rained. Now the same lights are on, the 12v doesn't work and the remote door locks don't work. Toyota want to run a diagnostic check at $125 an hour. Did you solve your problem?

Posted on Oct 31, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

4HI, 4LO and VSC OFF lights are flashing, the ABS and Slip Indicator lights stay on. I was operating in 4Hi earlier and all worked ok. Parked truck for about 2 hrs and then re-started to drive away the...


lot of time 4X4 will engage only in neutral and disengage in neutral. some times switching from drive to neutral and revers will help to disengage. just sake back and for till you feel the 4X4 is off.
Good luck

Mar 15, 2015 | 2011 Toyota Tundra

1 Answer

4wd light flashing


When the light flashes it's generally a sign that it's not fully engaged hi or low and or stuck partially in either position. I would say it's the force motor that physically moves the linkages in and out of position is going bad. It should be able to be scanned by a tech and give you a code.

Jun 15, 2014 | 1999 Ford Expedition

1 Answer

My 2000 silverado z71 when switching to 2hi 4hi or 4lo the push button will flash and the front end will not ingage. and also have a abs light on


The 4x4 will not engage unless the ABS is in proper order the reason being. ABS cannot operate in a 4x4 engagement,and in return the 4x4 will not hi or low without the ABS concerns corrected the solution fix ABS and the 4x4 switch goes back to normal operations

Feb 25, 2012 | 2000 Chevrolet Silverado 1500

1 Answer

I can move it in to low log but i cant move it into hi


Try shifting the transmission into neutral then pressing 4hi. It should flash and then engage. Shift into drive again and re-try. Anytime shifted from 4hi to 4lo it needs to be shifted into neutral during transition. There is no need for 4lo position, unless you are really stuck off road, in the mud up to the windshield. Do not use 4lo unless you 4WD off road.

Feb 02, 2011 | Chevrolet 1500 Cars & Trucks

1 Answer

4hi and 4lo lights flash but wont stay on


must be in neutral to go in 4lo. ther is a valve under the scatter shield under the motor, check that

Sep 17, 2009 | 1996 Chevrolet K1500

1 Answer

4wd issues!!! When I start the truck, all 3 lights( 2hi 4hi and 4lo) flash once on the switch then go off ( all of them). It drives just fine but is in 2wd. When I push any of the buttons the 4hi and 4lo...


THE 4WD SWITCH IS A PROBLEM. ALSO THE GROUND CONNECTOR ON THE FRAME CLOSE TO THE DRIVERS DOOR IS A PROBLEM. IT USUALLY HAS A COATING OF THE UNDERCOAT MATERIAL ON THE FRAME THAT IS NOT REMOVED BEFORE THE CONNECTORS ARE PUT IN PLACE.

THERE ARE 2 BOLTS THERE THE OTHER IS AN ABS GROUND CLEAN OFF THE UNDERCOATING FIRST, PUT DIELECTRIC GREASE ON THE CONNECTION POINTS, THEN COVER THEM IN SPRAY ON UNDERCOATING. THIS IS A CHEAP FIX TRY IT FIRST.

RATE ME PLEASE.

Jul 24, 2009 | GMC K1500 Cars & Trucks

1 Answer

!998 ford ranger stuck in 4x4


sounds like it's the motor is going bad or has a bad connection, try cleaning the connector if there isn't any gunk in the connector, check the manual see if there is a ohmn test you can run on the motor, if not i'd replace the motor.

Mar 19, 2009 | 1998 Ford Ranger SuperCab

1 Answer

Service 4wd light


what causes the 4wd to kick in when you have it in 2wd

Mar 13, 2009 | 2004 GMC Yukon

1 Answer

98 K1500 suburban, can not engage 4wd, HI or Lo runs otherwise


your doing it right but your accuater is bad 59.00 auto zone easy install

Feb 23, 2009 | 1998 Chevrolet Suburban

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...