Question about Cars & Trucks

1 Answer

I have a brand new Blue Wave sauna that has been working fine for a week now the power reset button keeps tripping every five minutes

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 3,103 Answers

These have a ground fault interupt built in for safety and to prevent electrical overloads.. it may need replaced due to not being heavy enogh to run it..there should be a minimum amp rating somewhere..like a base rate of 50 amps or so..look at the rating and see what the power outlet has on it.. may not be strong enough..or the ground is bad..

Posted on Jan 02, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How can i reset when the MAINT REQD indicator comes on?


Turn igniton to on position and put odometer in trip mode, turn off ignition.

Hold trip button in and hold it in as you turn ignition to on position, it will flash

Turn off ignition.

Maintenance light should go and stay off



Read more: http://wiki.answers.com/Q/How_do_you_turn_off_the_maintenance_required_light_on_a_2007_Camry#ixzz1KZXXjlhq

Apr 25, 2011 | 2007 Toyota Camry

1 Answer

Trying to reset oil change light on my 2006 ford explorer. the setup/reset steps dont work. it just cycles through. Midas did the oil change a week ago. i called them and they tried to give me steps to...


Ther are two types of clusters this is the most common, let me know if this doesnt work,you will be using the trip/reset button, when button is said it means the trip/ rest button this is the only button you will use.1)push and release button untilSETUP MENU HOLD RESET is display
2) press and hold button until you see SYSTEM CHECK or SYSTEM CHECK HOLD SET is displayed then release button.
3)press and release button to scroll the menu until you see HOLD RESET IF NEW OIL .
4) with hold rest if new oil displayed now push button and hold until you see OIL LIFE SET 100% displayed release button and your done. hope this helps.

Sep 23, 2010 | 2006 Ford Explorer

2 Answers

Uplander oil service idecator rest" 2007 model year


Not a problem. Comes on based on miles, so you should also change the oil. But you need to manually reset the counter.

Chevrolet Uplander, 2005-06 Chevrolet Venture 2001-05
With the ignition key in RUN but the engine off, repeatedly push the trip/reset button until OIL is displayed on the Driver Information Center (DIG).
Once “OIL” is displayed, push and hold the trip/reset button for five seconds.
The number will disappear and be replaced by 100 (indicating 100% oil life remaining).
Turn the key to OFF. If the “CHANGE ENGINE OIL” message comes back on when you start your vehicle, the engine oil life system has not reset.
Repeat the procedure.

Jan 02, 2010 | 2007 Chevrolet Equinox LS New Cars

3 Answers

How 2 turn off "oil change required" lite


Ford Explorer, Mercury Mountaineer, 2002-06

To reset CHANGE OIL SOON/OIL CHANGE REQUIRED message on the Message Center, press the SET UP control to access the System Check mode. Press and release the RESET button to display “OIL LIFE % HOLD RESET NEW” is displayed. Press and hold the RESET button for 2 seconds until “IF NEW OIL HOLD RESET” is displayed. Press and hold RESET button until “OIL LIFE SET TO 100%” is displayed.

Ford Five Hundred, Freestyle, Mercury Montego 2005-06 Tap the ODO/TRIP button to toggle the display between the odometer and trip odometer. Tap on the ODOiTRIP button again to toggle the display between the trip odometer and OIL LIFE % display. Press and hold the ODO/IRIP button for 2 seconds or more to display OIL LIFE 100%. Your oil life in now reset.

Good luck and print this and keep it in the glove box. Keep me posted if you have any other questions

Nov 04, 2009 | 2002 Ford Explorer

1 Answer

Changed oil and message center still says oil change required (2002 mercury mountaineer)


Ford Explorer, Mercury Mountaineer, 2002-06

To reset CHANGE OIL SOON/OIL CHANGE REQUIRED message on the Message Center, press the SET UP control to access the System Check mode. Press and release the RESET button to display “OIL LIFE % HOLD RESET NEW” is displayed. Press and hold the RESET button for 2 seconds until “IF NEW OIL HOLD RESET” is displayed. Press and hold RESET button until “OIL LIFE SET TO 100%” is displayed.

Ford Five Hundred, Freestyle, Mercury Montego 2005-06 Tap the ODO/TRIP button to toggle the display between the odometer and trip odometer. Tap on the ODOiTRIP button again to toggle the display between the trip odometer and OIL LIFE % display. Press and hold the ODO/IRIP button for 2 seconds or more to display OIL LIFE 100%. Your oil life in now reset.

Nov 03, 2009 | 2002 Mercury Mountaineer

2 Answers

After an oil change the change oil light remains on


Press the setup button until "press reset at oil change" is displayed.
Then press and Release reset button until "hold reset to confirm" is displayed.
Now press and Hold reset button until "oil life set to 100%" is displayed.

Apr 13, 2009 | 2005 Ford Five Hundred

1 Answer

I have a 2005 Venture and have not been able to reset the change engine oil light. After repeatedly pressing the trip/reset button for 2 minutes the message center was still flashing change engine oil and...


Notes ENGINE OIL LIFE SYSTEM

HOW TO RESET THE ENGINE OIL LIFE SYSTEM
The Engine Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you change your oil prior to a "CHANGE ENGINE OIL" message being turned on, reset the system.

  1. With the ignition key in "RUN" but the engine off, repeatedly push the trip/reset button until "OIL" is displayed on the Driver Information Center (DIC).
  2. Once "OIL" is displayed, push and hold the trip/reset button for five seconds. The number will disappear and be replaced by 100 (indicating 100% oil life remaining).
  3. Turn the key to "OFF". If the "CHANGE ENGINE OIL" message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure.
If this does not work you may have a problem with your instrument cluster.

Mar 22, 2009 | 2005 Chevrolet Venture

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...