Question about Cars & Trucks
Is there an adjustment to the rod that operates the door latch from the outside front door Buick regal 1996
Sometimes there is a threaded portion in the plastic bit that goes into the lock mechanism. This bit of plastic strips the thread and causes problems.
Posted on Jan 02, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Buick Regal brakes
Sometimes (when changing the brake calipers on disk brakes, or changing wheel cylinders on drum brake systems) the mechanic will clamp a vise grip pliers on the rubber hose to prevent hydraulic fluid from dripping out. This can break the internal fiber lining in the rubber hose. Then the fluid flow can be blocked. When you press the brake pedal, fluid may not flow to the wheel or wheels. As you press harder, the fluid may suddenly flow through the line, causing the brakes to suddenly activate.
Or an even more likely problem, your brakes drag (stay on) and get hot, because the fluid cannot flow back to the master cylinder when you release the brake pedal. In other words, when you press the brake you force fluid through a partially blocked rubber hose. But the return of the fluid (backwards through the rubber hose) is caused not by pressure, but just by equilibrium, a balancing act. Well, if the line (rubber hose) is blocked, the fluid stays in the caliper or wheel cylinder, and the brake is still on, and the brake gets hot.
Ken Camas, Washington email@example.com
Posted on Dec 28, 2008
Here is a link describing your strut replacement. Autozone also has free tool rental for the strut spring compressor if you need it. Thank you, and don't forget to vote. http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152800681ba
Posted on Jan 29, 2009
The low coolant sensor should be located in the passenger side radiator tank, You need to take it out and clean the sludge off of it for it to work right. Or you can just unplug it and forget about it, the light will go out and it won't cause any problems.
Posted on Mar 01, 2009
SOURCE: 1994 regal custom door
R/F door trim will have to be removed. Most likely you will find linkage disconnected from the inside latch of the outside door handle. You might even find a broken piece of the door handle requiring replacement
Posted on Apr 03, 2009
SOURCE: signal bulb on 2003 buick regal
To change front turn signal –
open the hood; look in back of headlight; two white clips; pull straight up, and then whole headlight comes out including turn signal; it is all one unit; remove rubber cover, then you take bulb out of unit. Mechanism that bulb fits in will need to be turned clockwise (looking from the front) and pulled to get it out of the larger unit holding all lights. Be sure and put rubber cover back on before re-inserting the two white clips.
Posted on May 07, 2009
Tips for a great answer:
Feb 03, 2014 | 1995 Buick Regal
Jan 01, 2014 | Cars & Trucks
Feb 07, 2011 | 1994 Buick Regal Gran Sport
Aug 08, 2009 | 1996 Buick Regal Olympic Gold
Jun 04, 2009 | 1996 Buick Regal Olympic Gold
Apr 03, 2009 | 1994 Buick Regal Gran Sport
Dec 16, 2008 | 1992 Buick Regal
Aug 05, 2008 | 1995 Buick Regal
52 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: