Question about 1994 Toyota Celica

1 Answer

Will not work

1994 Toyota Celica cruise control, i can some times turn it on but when i set the speed it starts to flash and will not engage. other times it will not turn on it just flashes. X_DS_X2009@yahoo.com

Posted by on

  • x_ds_x2009 May 20, 2009

    will it cost me thow i dont have a lot of money

  • Anonymous Mar 17, 2014

    The cruise control only engages at 35 mph or more. can it be set to engage at 30 mph?
    Is there a computer setting for this?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,004 Answers

Go for a scan. it will reveal some codes. Let us hear about it.

Posted on May 20, 2009

  • Onifade Adewunmi
    Onifade Adewunmi May 20, 2009

    It won't cost anything much/ It is about $5 in my country.



    rate mu suggestion, please.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I activated the cruise control on my 95 Nissan Sentra and now it won't disengage...any suggestions?


Cruise Control Problem - Nissan Forum

www.nissanforums.com/b13-91.../135028-cruise-control-problem.html
Jun 21, 2007 - 4 posts - ‎3 authors 1994 Nissan Sentra 4Door XE with 5 Speed Manual, GA16DE, 230k Miles. ... Now theCruise control light in the middle of the dash will NOT light up and the cruise control will not engage no matter what button I push. .... Cruise Control NOT working.. sentravis, B14 95-99 chassis, 26, May 29th, 2009 12:24 ... speedometer not working?
15 posts
Aug 3, 2007
Solution for P0500 VSS speed sensor problem on Nissan ...
15 posts
Jul 10, 2007
Solved flashing cruise control light
8 posts
Sep 8, 2006
cruise control problem
11 posts
Jul 13, 2005
More results from www.nissanforums.com

Sep 30, 2015 | Nissan Cars & Trucks

1 Answer

Where is the fuse for cruise control on a 2003 envoy


It is HVAC 1fuse #39 in the rear fuse block ,this powers the on/off switch for cruise control ! Fuse Block - Rear Beneath the left rear seat. What engine does it have ? 4.2 L or 5.3 l There is no vacuum involved in the operation of the cruise control ! Your vehicle has electronic throttle control .
Cruise control is a speed control system that maintains a desired vehicle speed under normal driving conditions at vehicle speeds above 40 km/h (25 mph). Steep grades may cause variations in the selected vehicle speeds.
The following are the main components of the Cruise Control System:
?€¢
The powertrain control module (PCM)


?€¢
The On/Off switch


?€¢
The Resume/Accel switch


?€¢
The Set/Coast switch


?€¢
The TCC brake switch


?€¢
The stop lamp switch


?€¢
The throttle actuator control (TAC) motor


?€¢
The vehicle speed sensor


Cruise Control Engaged
The cruise control system will engage and adjust the vehicle speed based on the activation of the following cruise control switches:
?€¢
On/Off


?€¢
Resume/Accel.


?€¢
Set/Coast

The cruise control switches are located on the multifunction/turn signal lever.
The powertrain control module (PCM) monitors the signal circuits of the cruise control switches in order to determine when to capture and maintain the selected vehicle speed. The PCM uses the throttle actuator control (TAC) module motor in order to control the vehicle speed. For further information on the TAC System, refer to Throttle Actuator Control (TAC) System Description in Engine Controls - 4.2 L.
Ignition positive voltage is supplied from the 10 ampere HVAC 1 fuse to the cruise control switch via the ignition 3 voltage circuit. When the normally open cruise control On/Off switch is turned On, the switch closes and the PCM detects a high signal voltage on the cruise control on switch signal circuit. When the normally open Set/Coast switch is pressed, the switch closes and the PCM detects a high signal voltage on the cruise control set/coast switch signal circuit. To engage the cruise control system, turn the On/Off switch On and momentarily press the Set/Coast switch. The PCM will confirm that the cruise control enable criteria has been achieved. The PCM will engage the cruise control system and record the selected vehicle speed. The PCM sends a class 2 message to the instrument panel cluster in order to illuminate the cruise control indicator. Pressing the accelerator pedal, while the cruise control system is engaged, will allow the driver to override the cruise control system in order to accelerate the vehicle beyond the current set vehicle speed. When the accelerator pedal is released, the vehicle will decelerate and resume the current set vehicle speed. The driver can also override the current set vehicle speed via the Set/Coast switch and the Resume/Accel switch. When the cruise control system is engaged, pressing and holding the Set/Coast switch will allow the vehicle to decelerate from the current set vehicle speed without deactivating the cruise control system. When the Set/Coast switch is released, the PCM will record the vehicle speed and maintain the vehicle speed as the new set vehicle speed. When the cruise control system is engaged, momentarily pressing the Set/Coast switch will allow the vehicle to decelerate at 1.6 km/h (1 mph) increments for each time that the Set/Coast is momentarily pressed, with a minimum vehicle speed of 37 km/h (23 mph). When the normally open Resume/Accel switch is activated, the switch closes and the PCM detects a high signal voltage on the cruise control resume/accel switch signal circuit. Activating and holding the Resume/Accel switch, when the cruise control system is engaged, will allow the vehicle to accelerate to a greater vehicle speed than the current set vehicle speed. When the Resume/Accel switch is released, the PCM will record the vehicle speed and maintain the vehicle speed as the new set vehicle speed. When the cruise control system is engaged, momentarily activating the Resume/Accel switch will allow the vehicle to accelerate at 1.6 km/h (1 mph) increments for each time that the Resume/Accel switch is momentarily activated, with the maximum acceleration total of 16 km/h (10 mph) over the current set vehicle speed . Momentarily activating the Resume/Accel switch, after the cruise control system has been disengaged by pressing the brake pedal, will recall the previous set vehicle speed that is recorded in the PCM.

Sep 11, 2015 | Cars & Trucks

4 Answers

2005 Chevy trailblazer ext problems 1. Cruise will not set.worked last on 4/12/15 2. While checking fuses for CC problemdome lights stopped working, but worked fine before checking fuses. PLEASE HELP!


Bummer deal! This may be a way to tell you some tail lights are burnt out. Some cruise controls have a fuse in a second location.
The fuse is not in right or is blown. Check with a new fuse. Hope this helps. ...gc http://www.auto-tune-up-and-repair-options.com/

Apr 20, 2015 | 2005 Chevrolet Trailblazer Ext

3 Answers

I have a 1994 Toyota Camry. Can you tell me where the cruise control computer is located?


has this issue been professionally diagnosed? a failure in the module may not be the issue..... pull codes from cruise computer(this may be achieved by jumper wire at diag connecter near passengers strut tower_ cruise light on dash will flash two digit code combinations). is there an ABSlight on also? speed sensor original?

25264966-vikm2l1x54dflzjz0fcbcuuu-3-0.gif

Nov 01, 2014 | 1994 Toyota Camry

1 Answer

Cruise control how to remove on a 1991 toyota celica gt


yes u can remove your cruise control on your celica (sept #1 take out or disconnect the cruise control cable on the throtle body then disconnect the wiring harness on the cruise control unit and if theres a vacum hoses connected just plug main vacum supply hose and your cruise control is already disable

May 09, 2014 | 1991 Toyota Celica

1 Answer

Cruise control no working on 2001 f-150 4 x 4 5.4


Did you have the recall done ?
recall 05S28. Description: Speed Control Deactivation Switch.

Try the self test for the Cruise Control :


With the key off depress and hold the cruise control off button while turning the ignition to the run position,don't start the truck, the cruise light will flash once to let you know it is in self test.
Five additional flashes indicate a bad cruise control servo

Release the cruise off switch and within 5 seconds depress the other switches in sequence:
1. on
2. resume
3. coast
4. set/ accel
The speed control light will flash as each switch is depressed.

If the last one does not flash it may then flash a code

After this the cruise will move the throttle to test the actuator and the cable.
Make sure the throttle returns to idle and turn the key off.
----------------------

Self-Test Diagnostics

WARNING:
This test is a key on engine off (KOEO) test only that is conducted in park only with emergency brake fully engaged.

1. Enter self-test diagnostics by depressing the speed control OFF switch while turning the ignition key ON, making sure the engine does not start and is not running. The speed control indicator on the instrument panel will flash once to indicate that speed control module entered the diagnostic mode. Five additional flashes at this point indicate a defective speed control servo. Release the OFF switch.

2. Press the remaining switches in this sequence: ON, RESUME, COAST and SET/ACCEL.

If the ON switch is not depressed within five seconds after entering the diagnostics mode, the module times out and the procedure must be started over.

The speed control indicator lamp will flash as each switch is depressed. Press each switch in the sequence immediately after the indicator light goes out for the previous switch.

Note:
There will be a slight delay when the last button is pressed and the lamp flashes.

3. A lamp flash with the last button (SET/ACCEL) indicates that the static test passed. If the lamp does not flash with the last button and there are no additional flashes of the lamp, the switch is defective.

If the lamp does not flash with the last button, and additional flashes occur, follow the chart below for trouble codes:

- 2 flashes - BPP defective, circuit is defective, brake applied, CPP switch or jumper (if equipped).

- 3 flashes - deactivator switch is open or circuit defective.

- 4 flashes - vehicle speed signal is out of range or circuit is defective

4. Immediately (.25 second delay) after the static test, the speed control servo does a dynamic test by automatically actuating the throttle lever from 8 mm (0.315 in) to 12 mm (0.472 in) of travel from the idle position. During the dynamic throttle pull, observe throttle movement to witness any binding or sticking of the speed control cable and correct connection of speed control cable to throttle lever. Make sure the throttle returns to the idle position.

5. Return the ignition switch to the OFF position and proceed to the Symptom Chart.

Oct 15, 2010 | 2001 Ford F150 Styleside SuperCrew

2 Answers

My brother just bought a 2004 Lincoln Town Car Signature.....I helped him find this car and he now tells me that the cruise control does not work.....My guess is that he is trying to set the speed and not...


Turn on the Cruise control ON on left side of steering wheel accelerate to desired speed push set button on right side of steering wheel to turn cruise OFF press off or tap brake pedal

Jul 17, 2009 | 2004 Lincoln Town Car

1 Answer

Toyota celica 2.0 gt 1994


sounds like a dirty fuel fiter. Start with cheapest fixes first. if not that maybe fuel pump is going bad.?

Mar 09, 2009 | 1994 Toyota Celica

3 Answers

1991 Celica GTS Cruise Control Problem


You may have a faulty brake lamp switch at the brake pedal. If the brake lights come on (via a bad switch), the cruise will cut off.

Aug 18, 2008 | 1991 Toyota Celica

Not finding what you are looking for?
1994 Toyota Celica Logo

Related Topics:

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8548 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...