Question about 2009 Toyota Avalon XL

1 Answer

Replace low beam bulbs on 2011 avalon

The passenger side is out but I want to replace both bulbs

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 3,103 Answers

Take to the parts store.. let them replace for you..they have the tools

Posted on Jan 02, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: LOW BEAM LIGHTS

Hi Rich Million,

Check the bulbs for the low beam problem and if they're ok, check the fuses under the bonnet (hood) which are found in the fuse box. If you've already checked those, go to the fuse box inside the vehicle.

Still no luck....remember that there are fuses and relays inside the cabin behind the kick panel.....You may find that there is a problem with the main fuse box.....If you drive over rough terrain, check the connections under the main fuse box....even if your roads are all smooth, it's still worth checking.....

Regards Johngee10

Posted on Sep 25, 2008

ourhowse
  • 2007 Answers

SOURCE: How do you change the headlight bulb (low beam) on

You should be able to access the buld holder from the rear of the headlight. It's a nylon bulb holder with a lock thing on it. You squeeze the lock part and turn it counterclock wise, and it should come out. Remove the old bulb and install the new one being careful not to touch the glass of the new bulb with bare fingers. The finger print you will leave can cause the bulb to prematurely die on you.

Posted on Jun 15, 2009

  • 290 Answers

SOURCE: passenger side headlight only works on high beam.

If you put it in; did you touch the bulb with your fingers? If so, I've seen bulbs pop as soon as they're put in. The oil from your skin leaves a residue, and the heat goes to it, and blows the bulb. wear jersey or latex gloves when you re-install new bulb. If it still doesn't work, replace headlight bulb socket

Posted on Aug 29, 2009

  • 2 Answers

SOURCE: Daytime Running Lights Inoperative 2002 Toyota Camry

[Information] For a 2002 Toyota Camry, the Daytime Running Lights (DRL) operate utilizing the High Beams (inner Lamps closer to the center of the vehicle front) at a reduced power.

[The troubleshooting process:] Review the Owner's Manual and ensure the test configuration matches the following criteria:
1. According to the 2002 Toyota Camry Owner's Manual (Check your Owners Manual):
"The DRL system will make your headlights come on at a reduced brightness when:
The light switch s in the "DRL" position.
The ignition is on with the engine running.
The headlight switch is off.
The parking brake is released."


2. Set the Test Conditions according to Step 1 above.

3. Check the headlight bulbs to ensure they are not burned out. If one burns out, there is a fair chance that the other would have burned out at the same time. Replace as necessary. In this case, if the high beams operate, the DRLs should also operate.
4. Test the system, ensuring the step 1 conditions are set. (Engine running, Multi-function Switch on Turn Signals in "DRL" position, headlight switch off (repeating what the manual says -- it should be obvious that in the "DRL" position, the headlight switch should be off / do not have the switch positioned to "High Beam"), and the Parking Brake "off").
5. If DRL lights do not work, check the engine compartment Fuse and Relay Box. there is a 5 Amp DRL fuse -- replace it with the spare. Test (step 4).
6. If it does not work, swap around or replace relays -- there are three (3). Any one of them could be bad (stuck or burned out). Test (step 4).
7. Other less likely possible issues could be that the Multi-function Switch is broken or a connection / wire is broken. [Beyond the scope of this process.]


My problem was that the test configuration did not have the engine running and parking brake off - Step 1. Problem solved with much thought, repetitive tests on the vehicle and going back to the basics -- what does the Owner's Manual say and where are the applicable fuses and relays located?

Posted on Jan 01, 2012

skychief2001
  • 21873 Answers

SOURCE: Headlight problems 2007 Toyota Corolla Sport, 186 000 kilometers: Driver side low beam stopped working last week.Had both bulbs replaced at Toyota Dealer.Today driver side low beam does not work, an

I would check for voltage at the dimmer switch first.

Posted on Aug 06, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2011 Chevy low beam headlight passenger side doesn't come on


Sometimes there is one bulb with two beams in it, other times each beam has a separate bulb. Replace the bulb that is not coming on as a high beam.

Jan 16, 2017 | Chevrolet Cars & Trucks

1 Answer

Passenger low beam won't light. New bulb did not help, fuses are good. What else can I check ?


low beam won't light Richard, faulty bulb socket module or wires, check and repair.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

How to Fix Low Beam Headlight

Low beam headlights out High beam working

High beams ok but not low beam one side only TDIClub Forums

Mar 06, 2016 | 2011 Mazda CX-9

2 Answers

Driver side headlight goes dim on high beam while passenger side is bright


bad connection or bad earth check all connection or bulb

Jan 24, 2016 | Cars & Trucks

1 Answer

The low beam on passenger side does not work,high beams work on both sides


Hi Greg:
I'd pull the bulbs from both sides and switch them.
You'll know right away if the bulb is the problem.
If low beam on the passenger side still does not work, then there is either a broken wire or bad connection. Make sure the area where the bulb fits into the socket is clean.
Usually there is only one bulb that has both high and low beam.

May 27, 2015 | 2005 Cadillac Deville

1 Answer

Passenger side low beam not working


make sure the connections are clean and no wires are broken.

Feb 08, 2014 | 2003 Lincoln Town Car

2 Answers

Bulb replacement for passenger side low beam on 2003 Mazda6


Google "mazda6club" - a very good forum and search "changing headlight bulb. Hope this helps.
Cheers,Peter

Mar 01, 2010 | 2003 Mazda Mazda6

1 Answer

Low beams don't work


i would check that tail light and make sure there are no wires touching each other. sounds like a deffinant short some where.

Dec 01, 2008 | Buick Century Cars & Trucks

2 Answers

Right headlamp


Check the fuse for the passenger side.It is under the hood. it may not be making good contact. wiggle it a little bit and see if it makes any difference. if not, check where the the ground wires are connected to the chasis. See if thats not the problem.

Oct 31, 2008 | 2001 Buick LeSabre

Not finding what you are looking for?
2009 Toyota Avalon XL Logo

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...