Question about 2006 Jeep Grand Cherokee

2 Answers

HOW TO REMOVE HEADLIGHT ASSEMBLY 2006 JEEP GRAND CHEROKEE

How do you Remove the Entire Headlight Assembly for a 2006 Jeep Grand Cherokee?

Posted by on

  • wsplain May 20, 2009

    I actually attempted the Driver's Side first... got a few bolts off, but it seems like something is still holding it on?



    I need to the the Passenger's Side off also...



    Any Help is MUCH APPRECIATED!!!! Thank you!

  • yadayada
    yadayada May 11, 2010

    which side

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 90 Answers

Remove the 7mm bolt in the centre top of lamp unit then with a big screwdriver just behind headlamp prise outwards quite firmly

Posted on Jul 03, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Take out the 3 bolts (10mm) then there is a tab goes over the heaglight bracket thats nearest the grille. You can push down on the bumper and kind of see it. But it just clips right off. All this is easier by taking out the grille of course. And bending the metal tab out of the way from nearest the top bolt also helps.

Posted on Oct 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace a tail light for a 2006 Jeep Grand Cherokee Laredo?


I am only replying as I also have the same vehicle and in order to get those light bulbs on mine I have to open the hatch and then remove the danged (entire) light assembly to get at it. Changing it in and out of the assembly only takes 20 secs. Getting at it takes 15mins at least. Have fun and good luck with it.

Aug 08, 2011 | 2006 Jeep Grand Cherokee

1 Answer

Where is the engine cooling fan relay located on a 2002 jeep grand cherokee laredo


It is located under the right (passenger) headlight assembly. The headlight assembly must be removed first. The quickest way is to use a Dremel tool to cut an opening in the headlight bucket. Go to YouTube and search for this procedure. I did it on my 2002 and it worked like a charm. Using the Dremel is easier than removing the entire header panel and other headlight. The Dremel procedure saves about 2 hours on the job.

May 19, 2011 | 2002 Jeep Grand Cherokee

1 Answer

Radiator fan relay 1999 jeep grand cherokee


its locatede under the passenger headlight assembly. Theoretically you need to remove the entire fornt core support to change it but it has become a common practice to remove the passenger headlamp assembly and cut holes into the core support to gain access to the relay.

0dd5d75.jpg

Oct 17, 2010 | Jeep Grand Cherokee Cars & Trucks

1 Answer

Removing and reinstalling a new headlight assembly in a 95 jeep grand cheerokee


LIGHTING Headlights REMOVAL & INSTALLATION Cherokee, Wagoneer and Comanche Models Fig. 1: Remove the top corner headlight bezel mounting screw 91076p12.jpg
Fig. 2: To access the turn signal bulb or headlight bezel mounting screws, remove the 2 turn signal housing retaining screws 91076p13.jpg
Fig. 3: After removing the turn signal housing from the headlight bezel, remove the 2 bezel mounting screws . . . 91076p27.jpg
Fig. 4: . . . then carefully pull the headlight bezel away from the headlight assembly 91076p11.jpg
Fig. 5: Remove the 4 headlight assembly retaining ring screws . . . 91076p07.jpg
Fig. 6: . . . then pull the retaining ring off of the headlight assembly 91076p06.jpg
Fig. 7: Pull the headlight assembly away from the vehicle just far enough to disengage the electrical connector from behind the headlight 91076p28.jpg
  1. Remove the headlamp bezel and retaining ring attaching screws. Remove the bezel and retaining ring.
  2. Pull the headlight out, disconnect the wire harness and remove the headlight from the vehicle.
  3. Install the headlight in the reverse order of removal.
Grand Cherokee and Grand Wagoneer Models
  1. Open the hood, reach into the engine compartment and locate the lock ring supporting the bulb assembly.
  2. Rotate the lock ring 1?8 turn counterclockwise and pull the bulb straight out from the housing. To install:
  3. Install a new bulb and position the bulb assembly in the lamp housing.
  4. Rotate the lock ring 1?8 turn clockwise to secure.
----
The Grand Cherokee will have an assembly that is fastened with bolts and screws to the body.
Get the new assembly and compare to the old one to see where to unfasten the bolts and other fasteners to aid in removing quickly.

Oct 08, 2010 | 1995 Jeep Grand Cherokee

2 Answers

How to remove headlight


I presume that you are replacing the bulb, typically the ENTIRE headlight with 3 or 4 bolts. NONE of which do any adjusting...then the whole thing comes out for easy bulb replacement. DO NOT TOUCH the glass of the replacement bulb.

Jun 22, 2010 | 2004 Jeep Grand Cherokee

1 Answer

How to remove a headlamp assy from a 1998 jeep grand cherokee


I believe the headlight assembly just pulls straight out. There are locating lugs on the headlight assembly which line up with corresponding lugs on the body work. There is also a problem with the headlight glass falling out as well. Replacements can be bought at the right price on e'Bay.

Feb 27, 2010 | 1998 Jeep Grand Cherokee

1 Answer

Change a headlight assembly Jeep Grand Cherokee


Just need take off the screws; for details check the graphics and ilustrations in the Jeep ZJ Grand Cherokee Service Manual

Hope helps (remember rated this) Good luck..

Jan 20, 2010 | 1998 Jeep Grand Cherokee

1 Answer

How do remove the headlight assembly for 2005 jeep grand cherokee?


I have a 2002 on mine you open the hood and there is 2 or 3 bolts holding them to the frame. Take them out and pull straight out on headlight assembly.Dont be afraid just PULL straight out good luck

Jan 06, 2010 | 2005 Jeep Grand Cherokee

1 Answer

1993 Jeep Grand Cherokee headlight assembly removal


Thairs 2 screws under head light and one on top corner of light.

Sep 19, 2009 | 1993 Jeep Grand Cherokee

Not finding what you are looking for?
2006 Jeep Grand Cherokee Logo

Related Topics:

2,232 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...