Question about Nissan Cars & Trucks

Open Question

How to remove x trail indicator lens

X trail indicator lens removal

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace front indicator bulb


You have to remove the lens itself. Open the hood and there will be a couple of screws holding the lens in. Loosen or remove those and pull the lens out the front. From there you can replace your lamp.

Feb 28, 2015 | 2004 Citroen Xsara Picasso

Tip

How to Remove Tail Lights on a Daewoo nubira Car?


The tail light consists of the brake lights, reverse lights, parking lights and turn indicator lights. 1)Tail lights at the back of your car. 2)Tail lights are on each back corner of the car. 3)There is plastic lens on above the tail lights in car. 4) Remove the screws on lens cover. 5) Remove the bulb after lens is removed. 6)The access panel will be on the inside of the trunk in the same position as the tail lights. 7)Open the trunk to access panel for the tail lights. 8) The bulb is screwed. 9) turn it counter clockwise to loosen and remove the bulb. 10) Reinsert the new bulb in the same procedure of how to removed. This will help.thanks.

on Mar 18, 2010 | Daewoo Nubira Cars & Trucks

Tip

How to Remove Tail Lights on a Buick Riviera Car?


The tail light consists of the brake lights, reverse lights, parking lights and turn indicator lights. 1)Tail lights at the back of your car. 2)Tail lights are on each back corner of the car. 3)There is plastic lens on above the tail lights in car. 4) Remove the screws on lens cover. 5) Remove the bulb after lens is removed. 6)The access panel will be on the inside of the trunk in the same position as the tail lights. 7)Open the trunk to access panel for the tail lights. 8) The bulb is screwed. 9) turn it counter clockwise to loosen and remove the bulb. 10) Reinsert the new bulb in the same procedure of how to removed. This will help.thanks.

on Mar 18, 2010 | Buick Riviera Cars & Trucks

1 Answer

Remove lens


what is this exactly?

Jan 01, 2014 | Cars & Trucks

2 Answers

Parking brake cable stretched beyond adjustment how do you replace


Rear Brake Shoes- You'll need to know how to remove the rear brake shoes to remove the parking brake cable. REMOVAL AND INSTALLATION Amigo and Rodeo
  1. Raise and safely support the vehicle.
  2. Remove the rear wheels.
  3. Remove the brake drums.
  4. Remove the brake return springs.
  5. Remove the leading shoe holding pin and spring, and then the leading shoe.
  6. Remove the self-adjuster and the adjuster lever.
  7. Remove the trailing shoe holding pin and spring.
  8. Disconnect the parking brake cable from the trailing shoe and remove the trailing shoe. Remove the parking brake lever from the trailing shoe. To install:
  9. Attach the parking brake lever to the trailing shoe.
  10. Connect the parking brake cable to the parking brake lever.
  11. Apply a thin coat of high temperature grease to the shoe contact points on the brake backing plate (locations A and C in the accompanying illustration), piston contact surface (B), and self-adjuster (D). Fig. 1: Exploded view of the rear drum brakes — Amigo and Rodeo 93026g56.gif

  12. Position the trailing shoe on the backing plate and install the hold-down pin, spring, and retainer. Don't stretch the return spring when fitting the shoes onto the backing plate.
  13. Connect the upper return spring and the leading shoe to the trailing shoe and position the leading brake shoe on the backing plate.
  14. Install the adjuster assembly and the hold-down pin, spring, and retainer.
  15. Use a brake spring tool to install the lower return spring.
  16. Install the self-adjuster lever and adjuster spring.
  17. Adjust the shoe-to-drum clearance to 0.0098–0.0157 in. (0.25–0.40mm) and install the brake drum.
  18. Check the brake drum for scoring or other wear. Machine or replace as necessary. Check the maximum brake drum diameter specification when machining.
  19. Install the rear wheels. Lower the vehicle.
  20. Road-test the vehicle.
prev.gif next.gif

Aug 17, 2010 | 1997 Isuzu Rodeo

Tip

How to Remove Tail Lights on a Chevrolet blazer Car?


The tail light consists of the brake lights, reverse lights, parking lights and turn indicator lights. 1)Tail lights at the back of your car. 2)Tail lights are on each back corner of the car. 3)There is plastic lens on above the tail lights in car. 4) Remove the screws on lens cover. 5) Remove the bulb after lens is removed. 6)The access panel will be on the inside of the trunk in the same position as the tail lights. 7)Open the trunk to access panel for the tail lights. 8) The bulb is screwed. 9) turn it counter clockwise to loosen and remove the bulb. 10) Reinsert the new bulb in the same procedure of how to removed. This will help.thanks.

on Mar 18, 2010 | Chevrolet Blazer Cars & Trucks

Tip

How to Remove Tail Lights on a Car?


The tail light consists of the brake lights, reverse lights, parking lights and turn indicator lights. 1)Tail lights at the back of your car. 2)Tail lights are on each back corner of the car. 3)There is plastic lens on above the tail lights in car. 4) Remove the screws on lens cover. 5) Remove the bulb after lens is removed. 6)The access panel will be on the inside of the trunk in the same position as the tail lights. 7)Open the trunk to access panel for the tail lights. 8) The bulb is screwed. 9) turn it counter clockwise to loosen and remove the bulb. 10) Reinsert the new bulb in the same procedure of how to removed. This will help.thanks.

on Mar 18, 2010 | Eagle Vision Cars & Trucks

1 Answer

How to replace head lightson 2002 trail blazer


open hood drivers side the rubber boots at the back of the lens low beam lower boot grasp and remove a little twist helps if not use a flat screw driver to pry back, pass side 3 screws on air cleaner remove and remove cover to get to the lower boot

Sep 24, 2009 | 2002 Chevrolet TrailBlazer

2 Answers

How do I change the lowbeam headlight on my 2003 Chev Trail Blaze


hi..Should be a Halogen bulb High-low beam combo maybe.
As you are looking down at the back of the headlight assembly
gently push down on the clip that holds the wiring harness to the
bulb. Now rotate the bulb counter clock wise (left) and then remove
it. Reverse process to install.
check it out..
thank u..
rate me..

Mar 10, 2009 | 2006 Chevrolet Trailblazer Ext

Tip

How to Remove Tail Lights on a Audi all road Car?


The tail light consists of the brake lights, reverse lights, parking lights and turn indicator lights. 1)Tail lights at the back of your car. 2)Tail lights are on each back corner of the car. 3)There is plastic lens on above the tail lights in car. 4) Remove the screws on lens cover. 5) Remove the bulb after lens is removed. 6)The access panel will be on the inside of the trunk in the same position as the tail lights. 7)Open the trunk to access panel for the tail lights. 8) The bulb is screwed. 9) turn it counter clockwise to loosen and remove the bulb. 10) Reinsert the new bulb in the same procedure of how to removed. This will help.thanks.

on Mar 18, 2010 | Audi AllRoad Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...