Question about 2006 Toyota Matrix

1 Answer

Computer Code P-2716 (Pressure Control Solenoid - D - Electrical). What is this and will it hurt anything to drive it? Dealer can't see it for 6 days.

The engine light comes on. It shows a code of P2716 Pressure Control Solenoid - D - Electrical. What is this and is it okay to drive it for 6 days until I can get it to a dealer?

Posted by on

  • crcoleman_44 May 20, 2009

    Thank You for your help.... Yes it does shift pretty hard. I feel some relief knowing it's a replaceable part and not the whole transmission.
    Thank You very much.

    CC


×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Toyota Master
  • 76,846 Answers

This code is caused by a problem in the engine/transmission control module, a new part has been released by Toyota to repair it, it may be coered under warranty. as to driving it, yes that is not a problem, u may experience a harsh trans shift that is about all.

Posted on May 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

DTC code P2716 on Toyota yaris


Error Code: P 2716
Description: Pressure ControlSolenoid "D" Electrical (Shift Solenoid Valve SLT)
Faults:
1. Open or short in shift solenoid valve SLT circuit
2. Shift solenoid valve SLT
3. ECM

Jul 29, 2015 | Toyota Yaris Cars & Trucks

1 Answer

Right now my car has a problem with the p2716 code


Unfortunately a P2716 code is a code for the pressure control solenoid inside the automatic transaxle, my suggestion to you is to take it to your local Toyota dealer where they will be able to monitor the shift solenoids within the transaxle.

Hope this helps....

DTC P2716 PRESSURE CONTROL SOLENOID "D" ELECTRICAL

Sep 09, 2011 | 2006 Toyota Corolla

1 Answer

I need to replace the pressure control cylinder in my 2005 Toyota Corolla LE.....How expensive is this to do ?


Hello. Welcome to FixYa Please allow us to assist you.

Regarding the Pressure Control Cylinder, we would recommend that you do not replace it; as there is really nothing wrong with it. The code you are seeing, P-2716, does indicate a "fault" with the solenoid, but the main issue is the car's computer, not the solenoid.

What you need to do is take your car to a Toyota dealer.
There is a Technical Service Bulletin that addresses this issue.

The recommended fix is a replacement of the engine control unit (the computer). This service will be performed at no charge to you, if your car has less than 80,000 miles on it.
Get the computer replaced, and your problem will disappear.

Thanks for choosing FixYa for assistance today.

Nov 11, 2010 | 2006 Toyota Corolla

2 Answers

Engine light on...P2716 diagnostic code...pressure, control solenoid..D electrical..is this a recall problem


Hello. Welcome to FixYa.

No, the P-2716 DTC is not a recall.
It is a software issue that results in a 'false code' being generated.

What Toyota is doing is replacing your computer with an updated unit; the programming in the current computer needs to be changed, and the Corolla computer you have cannot be 'reflashed', it must be physically changed out.

If you car has less than 80,000 miles on it, the replacment will be free.
Get in touch with your local toyota dealership, and they will get you a new computer.

Feb 12, 2010 | 2006 Toyota Corolla

1 Answer

As you stated they will replace the pressure control solenoid by technical service bulletin. Is there a mileage cut off for when they will not replace the Pressure Control Solenoid on the 06 corrolla for...


If you are referring to a P-2716 code, no, they will not replace the PCS; what you need is a new computer.

It will be replaced for free, if your car has less than 80K miles on it. That is the mileage limitation.

The PCS is not the issue, the programming is the issue, but, the computer in your car cannot be 'reflashed'; Toyota will replace it.

In short, replacing the PCS will not rectify your issue. Again, it is a software issue, not a mechanical issue.

Feb 10, 2010 | 2006 Toyota Corolla

1 Answer

Where is this solenoid located


Hello. You do not need a solenoid with a P-2716 code.

You need a new computer.

Toyota is aware of this, and the new computer fixes the issue.

If your car has les than 80,000 miles on it, the replacement will be free.

Dec 14, 2009 | 2006 Toyota Matrix

2 Answers

Code P2717 Pressure control solenoid on Corolla 06 LE


Hello. Welcome to FixYa. Please allow us to assist you...

YES! The P-2716 code IS a common problem.

I am glad that you did not pay for the repair, because the repair is a new computer.

Fortunatly for you, there is a technical service bulleting from Toyota; they will replace it for FREE!

Call your nearest Toyota dealership, tell them you have a P-2716, and make an appointment. They will replace the Electronic Control Unit (the computer) at no charge.

The part is roughly 950 dollars.

Sep 17, 2009 | 2006 Toyota Corolla

1 Answer

Pressure control solenoid "D" electrical


Is the check engine light on? Does it have a P-2716 code displayed on a scan tool? If so, you need a electronic control unit (the computer), AND, it will be replaced free by your Toyota dealer if the vehicle is under 80,000 miles.

Sep 09, 2009 | 2006 Toyota Matrix

2 Answers

Pressure Control Solenoid "D" Electrical


You need to take it to a reputable repair facility. The pressure control solenoid needs to be checked for proper operation. If the solenoid is operating properly, the PCM (Powertrain Control Module[computer]) will need to be replaced. If you continue to drive the vehicle with this condition the transmission will eventually destroy itself.

Jan 28, 2009 | 2005 Pontiac Vibe

Not finding what you are looking for?
2006 Toyota Matrix Logo

1,481 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...