Question about Cars & Trucks
You will be needing to take and have it fixed. Should be the motor or the window regulator, both are inside the door. Be blessed.
Posted on Jan 02, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I had the same problem with now power to windows, mirrors and seat. The common soulution is the orange and or black wire in the boot have broken between the door and post.
Posted on Dec 07, 2008
Remove the door panel and find the window motor Unplug it and using a separate car battery run cables directly to the window motor When you switch the polarity the motor will either bring the window up or down or if noting happened change the window motor and window regulator assembly.
Posted on Jun 08, 2009
The control may have gone bad... You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. Then you can disconnect the controls and test them
Posted on Aug 14, 2009
the drivers door switch is most likely bad, they get used the most and wear out first, the connector on the back of switch may have come loose and not making good electrical contact, remove switch and check connector and if still not working need new switch, the windows are all on same circuit and either all work or none work so not fuse. extremely rare is a short in wired but not likely.
Posted on Aug 18, 2009
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Pull back the weather seal and you can readjust the window mechanics.
Posted on Sep 29, 2009
Tips for a great answer:
Oct 30, 2015 | 2002 Mazda Protege
Nov 21, 2013 | 2006 Mazda 3
Aug 23, 2013 | Cars & Trucks
Aug 12, 2010 | 2006 Mazda 6
Mar 19, 2010 | 2006 Mazda 6
Sep 18, 2009 | Mazda MAZDA6 Cars & Trucks
Sep 05, 2009 | 2006 Mazda 6
Dec 03, 2008 | 2006 Mazda 3
Aug 11, 2008 | 2006 Mazda 6
Aug 08, 2008 | 2006 Mazda 6
Aug 21, 2017 | Cars & Trucks
23 people viewed this question
Usually answered in minutes!