Question about Cars & Trucks

1 Answer

Turn signals dont work most of the time what might be wrong with them

Tried to fix my turn signals but they still only work part of the time

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 5,252 Answers

It is probably worn contacts within the switch. Some people take them apart and sometimes get them working again. Most people replace them- new or used, depending on your budget.

Posted on Jan 01, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hazard and turn signals stoped working in my 2005 chrysler pacifica whats wrong with it


Just for the hell of it try pulling the flasher out of it's socket and see if it shorts out I would try another flasher othewise I wonder if you have a direct short in the steering column like in the turn signal switch

Dec 26, 2011 | 2005 Chrysler Pacifica

1 Answer

Left turn signal will not work


either wrong signal bulb or short in left turn signal wiring if both left signal lamps not working.if only one of left turn signal dont work could have corroded bulb socket spray a little electronic cleaner in bulb sockets see if left signal work.

Nov 27, 2011 | Cars & Trucks

1 Answer

On my 96 mercury villager if I use the hazard signal my turn signal not working. Sometimes turn signal will work when using hazard couple times. what is wrong with it? how do I fix it?


all those things go through a turn signal switch, on the fords i believe you can replace it without removing the steeering wheel, its kind of a big job

Mar 06, 2011 | 1996 Mercury Villager

1 Answer

My 1993 crown victoria's signals are not working, my headlights and taillights all work. what is wrong and how do i fix it? i dont have alot of money and need to know how to fix this on my own.


CHECK TURN SIGNAL FUSE IN THE FUSE BOX LOWER LEFT SIDE OF THE INSTRUMENT PANEL.IF FUSE OKAY PROBLEM COULD BE THE FLASHER IN THE FUSE BOX ITS A LARGE ROUND METAL TIN LOOKING FUSE.YOU SEE IT IN THE INTERIOR FUSE BOX.IF FLASHER GOOD.TURN SIGNAL SWITCH COULD BE FAULTY.SHAKE TURN SIGNAL SWITCH WIRES CHECK FOR SHORTS.

Nov 21, 2010 | 1993 Ford Crown Victoria

2 Answers

Turn signals hazards flasher don't work jeep cherokee replaced combination flasher relay, turn signal switch and still no signals


I NEED TO LOCATE THE SWITCH WHERE IS IT ?
MY INDICATORS NOR HAZARD LIGHTS ARE WORKING I DONT KNOW WHAT IS WRONG WITH IT CHANGED BULBS BUT NOTHIGN THEY ALL WENT OUT AT THE SAME TIME
SO THERE MUST BE A RELAY SWITCH SOMEWHER BUT DONT KNOW WHERE ?
THANKS FOR HELPING

Sep 27, 2009 | 1999 Jeep Cherokee

2 Answers

Turn signals dont flash on 95 firebird formula


There are dual elements bulb and single element bulb.

You need to see is there two contacts inside the socket.

If you accidentally put a single contact bulb into dual contact socket......it will cause this problem.

Check it out.


Jul 14, 2009 | 1996 Pontiac Firebird

1 Answer

Turn signals dont work headlights dont dim heater fan doesnt work


Did all these problems happen all at one time?? If so you may have a bad body ground. Try running a electrical wire from the (-) negative side of the battery to the body and see if this works. Be sure this wire is to a place with no paint as low voltage electricity will not flow through paint.
A). If not try replacing the turn signal flasher for the turn signal problem. This is usually the culprit and it's easiest and cheapest to replace. The turn signal flasher will be found under the driver side dash next to the hazard flasher. Turn the hazard flasher one to locate it. If you want try swapping the turn signal flasher with the hazard flasher to see if this fixes it. They are the same style flasher.
If this doesn't work you may a faulty turn signal switch or some wiring issues.
B). It could as simple as the head lights bulbs need to be replaced, it's rare but I have seen when both bulbs blew at or near the same time. If your able check the voltage at the head sockets.
C). Could be a bad blower motor or switch. I'm not sure if these models have a resistor block or not. The resister block controls the electrical current going to blower motor which controls the speed of the blower fan.

Jan 19, 2009 | 1992 Dodge Caravan

1 Answer

Turn signals dont work


hey, same problem. Car not fixed but try fuses, relay, also check bulbs and replace if you see that the are "black" on one side. I'll try to post you on what was wrong with my car in a couple of days. Good luck!

Dec 30, 2008 | 1997 Cadillac Seville

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...