Question about GMC Cars & Trucks

Open Question

Wiring diagram for side mirror 3pin

I dontknow where the wire connect to switch

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: AUTO DIMMING MIRROR

The Donnelly mirrors use the same 7-pin plug as the Gentex, but the pin-outs are different. Here is the pin-out for the Donnelly mirrors:

Pin 1 - +12 volts
Pin 2 - Courtesy lamp input
Pin 3 - (varies depending on mirror features)
Pin 4 - (varies depending on mirror features)
Pin 5 - Reverse disable (+12 volts in reverse)
Pin 6 - Ground
Pin 7 - Demand lighting input

Posted on Nov 11, 2008

  • 11 Answers

SOURCE: fiesta 06>08 electric/folding mirrors online wiring diagram

ford etis online

Posted on Mar 07, 2009

  • 82 Answers

SOURCE: 87 regal ignition switch wiring diagram

Thick wires at IGN SW .... Red(s) - supply power from the battery to the IGN switch ... Pink - ignition supply ... Orange - Accessory power ... Purple most RWD sometimes (Yellow most FWD) - Starter .. Did I miss any? It's been a while The thin wires on the IGN swich are for key sense and VATS (if applicable)

Posted on May 08, 2009

  • 490 Answers

SOURCE: I need wiring diagram for a 1999 Ford f250 side

make your self a jumper set of wires to test with. Find out what makes what move on the old unit,write down the color wire,then apply power and ground to the new unit onw wire at a time.Mark down the color and what function it did.after testing both units then match your research and put the wires together.I wished I were there.Good Luck!

Posted on Jul 24, 2009

  • 1986 Answers

SOURCE: removing door panel drivers side to connect mirror wiring behind this panel

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Posted on Aug 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My power mirrors on my 2012 Chevy Malibu and I found the fuse for it which was blown. I replaced it and went to use the mirrors again and the fuse blew again. What is the problem?


You have a short in the wiring of that fused circuit, or less likely that one of the mirror motors has a short. A short is an unintended path to ground, like an exposed wire touching body metal, or an internal motor failure. If that fuse is only for the mirrors and nothing else, it will be easier to find. A likely place will be in the door openings where the wires can get stretched and chafed. Pull the protective boot away from the wires where they enter the door, and check carefully. You may need to get to the mirror motors and to the switch for them. If everything looks okay, better get a multi-meter to check sections of the wires for continuity. A wiring diagram will be needed to find the right color wires that you will be looking for. I am guessing that each motor will have 4 wires to it, 2 for side to side, and 2 for up and down. These 4 wires will come from the switch on the driver's door that operates them. Power travels from the fuse to the switch, and then to the mirrors, as the switch operates them. The ground wire for the mirrors will originate at the switch, or it may be a shared common ground at the driver's master switch for the mirrors and the power windows. The short may be in any of these wires, or in the switch (evident at the connector to the switch as melted plastic, perhaps), or a short in one of the mirror motors. Good luck and good hunting.

Dec 06, 2014 | 2012 Chevrolet Malibu

Tip

Power Mirror Wiring Schematic 92 Buick Lesabre 1992 thru 1997 & More


Here is a schematic which my dad & I devised over the course of two hours for the power mirror wiring on our 1992 lesabre, as we couldn't find any wiring info to handle this issue.

http://www.iqmetals.com/else/lesabre/

That's our/my website, and that folder will let you see & get all of the pictures & diagrams

The wiring harness for the power mirror switch was acquired through Rock Auto, and the wire lettering scheme was embossed onto the plastic.
Here's a written breakout of the wires & their locations/purposes.

A= Ground
B= Common Left/Right Motion(Splits to both sides)
C= Common Up/Down Motion(Splits to both sides)
D= Left Side - Left/Right Motion
E= Left Side - Up/Down Motion
F= Right Side - Up/Down Motion
G= Right Side - Left/Right Motion
H= Positive 12V

Now Assuming that all of the power mirrors are wired & color coordinated the same, that would connect....
B -- Light Blue wire of Both Mirrors
C -- Green wire of Both Mirrors
D -- Gray wire of Drivers Side Mirror
E -- Dark Blue wire of Drivers Side Mirror
F -- Dark Blue wire of Passengers Side Mirror
G -- Gray wire of Passengers Side Mirror

In our circumstance we hooked up the power and ground inline with the power window Power(Pink) & Ground(Black) wires which are nearby in the door. The fuse/circuit should easily handle the minor load of power mirrors, even if you were using the windows and mirrors at the very same time... a rarity I do suppose.

647aa8a.jpg
77801ab.jpg
3e90b3f.jpg
f8d21d5.jpg

on Nov 28, 2009 | 1992 Buick LeSabre

1 Answer

Wiring diagram for a vw sharan 2000 x reg wing mirrors


your mirror control switch has 9 wires.,your drivers door mirror has 5 wires color coded .from your mirror control switch to your drivers siide mirror / 0.5 black .0.5 brown. 0.5 brown. 0.5 black. 0.5 black.
your passenger mirror wires are 0.5 blue/black .0.5 blue/grey. 0.5 blue/white. the passenger mirror has a ground cable 0.5 brown.
the passenger mirror wire 0.5 green/white connects to a 5amp fuse/F25 onto F31 5amp to a wire 0.75 green/yellow.back to the mirror control switch.

Sep 11, 2012 | Cars & Trucks

1 Answer

Hello, I want to put heated mirrors on my 1997 chevy tahoe and want to know if I can piggy back off the rear defrost switch. The elements pull 3.8 amps for total. There is the convenience center located...


Yes, you can grab power from the rear defog at the switch or the power wire under the dash at relay for mirrors, most of these trucks come prewired, so if its an option they just add heated mirrors, the wires are all in place on the newer one, check yours and see, the only thing you would need if prewired is the switch and the mirrors.this being a 97 might not be prewired but like you said you can wire it, you have the right idea this way the mirror work when the defrost is on, i will see if i can give you a wiring diagram of the rear defrost. hope this helps.johnjohn2_29.gif

Dec 02, 2010 | Chevrolet Tahoe Cars & Trucks

1 Answer

2001 explorer sport trac side mirros not working"


did you check power mirror fuse? if ok, remove your power mirror switch at the driver side and clean the contact area, take a test light and check all wires for good connection. one by one test the voltage output,-/+ by pressing the switch, if all wires have output -/+ , and mirrors still not working, remove the switch connector, find out the three wires going to power mirror and direct it to - and positive voltage alternately, if the mirrors move, repair the wire that cut on the moving area, if still not moving repair or replace the two motors inside the mirror

Jul 13, 2010 | Ford Explorer Sport Trac Cars & Trucks

1 Answer

Power mirrors don't work. Which fuse controls this


Here is repair information from Mitchells:
1) Disconnect power mirror switch connector. Connect test light between power mirror switch harness connector terminal "A" (orange wire) and ground. If test light illuminates, go to the next step. If test light does not illuminate, repair open in orange wire between power mirror switch and righ rear power distribution center fuse block No. 1 (located under left side of rear seat).
2) Connect test light between power mirror switch harness connector terminals "A" (orange wire) and "J" (Black wire). If test light illuminates, check for poor connections at the power mirror switch. If connections are okay, replace power mirror switch. If test light does not illuminate, repair open in Black wire between power mirror switch and ground.

Aug 04, 2009 | 1997 Oldsmobile Aurora

2 Answers

Broken driver side view mirror-2005 camry


Heated mirrors usually have a symbol on them -- a small diagram showing squigley heat lines.

If you don't see this, it's probably not heated. But when you take the mirror off, if it's heated it'll have wires connected to the back.

Yes, you can replace a heated mirror with non-heated -- just leave the wires tucked out of the way when you install the new mirror.

Apr 29, 2009 | 2004 Toyota Camry

1 Answer

Bmw e46 electric wing mirror wiring diagram


your mirror control switch has 9 wires.,your drivers door mirror has 5 wires color coded .from your mirror control switch to your drivers siide mirror / 0.5 black .0.5 brown. 0.5 brown. 0.5 black. 0.5 black.
your passenger mirror wires are 0.5 blue/black .0.5 blue/grey. 0.5 blue/white. the passenger mirror has a ground cable 0.5 brown.
the passenger mirror wire 0.5 green/white connects to a 5amp fuse/F25 onto F31 5amp to a wire 0.75 green/yellow.back to the mirror control switch.

Jan 20, 2009 | 1999 BMW 318 ti

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

10 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...