Question about 2002 Buick LeSabre

1 Answer

Driver side window bracket

Bracket broke off track causing window to fall inside door panel

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 108 Answers

That is usually a big job. If you can get the door pad off maybe the front or rear track can be fixed. At leased the window can be put back temporarily. Most door pads have 2 or 3 screws. (look in holes). The electric switches should pop up and remove wire connectors. With a flat tool ,go around door pad edge and pop up clips. .Then lift pad up off top. Tricky Buisiness.

Posted on Jan 01, 2014

  • Erica Northup
    Erica Northup Jan 01, 2014

    its not a buick lasabre, its a 2004 gmc yukon xl. door panel is off and window shimmed up. not electrical issue (most forums/information is about motor or regulator) i have this L shaped steel/metal clamp (2 pieces that are bolted together with rubber padding in between) that needs to be reattached

×

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 03 buick rendezvou window problems window falls down in door

The part numbers for the two plastic clips are ;;15286776 and 15286777.
Ian

Posted on Mar 27, 2009

  • 1986 Answers

SOURCE: REMOVING A DOOR PANEL

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Posted on Aug 14, 2009

  • 6 Answers

SOURCE: The left rear door window fell off its track.

LeSabre window regulator cable is kinked...? Can the cable be changed out or unkinked without buying a new window regulator?

Posted on Aug 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MY DRIVERS SIDE REAR WINDOW FALLS DOWN WHY ?


The windows has came out of the window track. You will need to remove the door panel to seat back in the track and purchase an adhesive to apply to the window and brackets so it will not come out again.

Jun 17, 2011 | Ford Escape Cars & Trucks

1 Answer

Passenger side window came off trac and is sitting in door


you have to remove the door panel..unbolt the tracking from inside the door..slide the windows back inside the track rails....push window all the way up..tape the window so that id does not fall back down or have someone hold window up while you rebolt the track to the door.replace door panel....the tracks move over time and that it why the window fell.

Jan 26, 2011 | 2004 Cadillac Deville

1 Answer

Bracket for a grand wagoneer window on driver side. how do you install new peaces to hold window in place


The nylon gear track assembly that controls those window systems fail all the time. You've got to remove the interior door panel and most likely replace the gear track assembly. Once the panel is removed you can work on it through the cutouts in the door metal on the inside of the door. It's not easy to get to even with the panel removed. Good luck!

Dec 26, 2010 | AMC Wagoneer Cars & Trucks

1 Answer

Driver window off track,went to roll window down and window fell inside of door.Window crank turns freely.


remove door panel, If you are mechanically inclined you can figure out how to connect the regulator (operating assembly) back to the window by removing mounting bolts of assembly and pivoting. Something came loose or broke, window guides are worn (plastic parts), or assembly is way out of alignment for window to fall off track....

Sep 16, 2010 | 1993 Plymouth Acclaim

2 Answers

My passenger side window doesn't roll up and it slides down into the door


Before the failure, did it make any knocking or griding noises? When you operate the button does the motor make it's normal noise? Did the window become loose and fall down inside the door abruptly? Some vehicles have issues with the "window regulator". This is the cabling device that hoists and lowers the window on the inside rail. Some automakers use plastic bits to keep the window on the rail. If those become loose or break, the window will fall off the tracks. Continued operation of the window will cause the regulator (cables, gear or motor) to fail. If you want to attempt a DIY fix, remove the door cover (a mechanic will usually call this a door card) and see if the window is off the rails. Good luck.

Jul 06, 2009 | 1999 Jeep Grand Cherokee

1 Answer

Drivers side window not on track


you will need to remove the door panel and inspect the track. Most of the time, the nylon rollers or connectors break on the lift brackets and the window falls on one side.

Jun 10, 2009 | 2006 Ford Taurus

1 Answer

Driver side window is off track and stuck about 75% closed


If your power window motor is not moving up or down at all inside the door panel, you will need a new motor.
If your window is stuck and will not move, it is the motor - it is bad.
If your window falls down into the door panel, the window is off track.
Replacing a window motor is an easy fix, get another one from an auto parts store and replace it.
Good luck!

Mar 12, 2009 | 1993 Honda Accord

1 Answer

2001 oldsmobile alero window off track,


first remove the door panel there are three screws that need to be removed first 2 under the inside door handle and 1 on the lower left hand side behind a reflector then pull off the panel it will be held on by push clips, once inside move the plastic weather bearrer to the side ,run the window half way down you should see 2 window holding brackets pull the window up so you can drop it in the brackets, first get some black window adhesive fill the brackets with adhesive put window in brackets and roll it up and leave it up for 24 hrs.If the brackets are broken you will have to replace the whole window motor assemly which you can get on line for 89.00 not the 250.00 at dealer and you can install it yourself its easy to do.

Jan 22, 2009 | 2001 Oldsmobile Alero

2 Answers

Driver's side window stuck open.


unfortuanately the window has come off the track... happens for various reasons... on my windstar the side rail spot weld broke so the rail/track came off... i had to take the bracket out ... drill out the spot weld and put it back together with a rivet ... put the window back and it's been good since.... basically you will need to take the door panel off to see why it came off the track.

Robert

Dec 17, 2008 | 1999 Jeep Grand Cherokee

Not finding what you are looking for?
2002 Buick LeSabre Logo

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...