Question about 1999 Jeep Grand Cherokee
You can't see if you're in if you're in reverse, park, neitral,or drive at night
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
According to the mechanic who works on my 94 Jeep it's one of three
1) Corrosion on the connector to the switch (which is located on top of the transfer case).
2) A bad switch. Part cost about $22.00 or,
3) A bad console display. he says they have had a fair number of console display units fail.
Posted on Jul 15, 2009
This could be an issue with the shift solenoid , but can also be caused by low fluid due to a leak, check your fluid. Is there a check engine light on, if there is it could be a solenoid issue.
Posted on Aug 26, 2009
There are two parts to it, a voltage resistor, and the EL panel itself.
You need to remove the console first. There are 2 screws under the front rubber pad, two under the cup holder, two in the bin. Remove those six first, take the storage bin out, then slide the rear cupholder out, remove the two screws under the cup holder, and one in front of it.
There are a total of 6 flat screws, and 3 self tapping screws you have removed.
Put the parking brake on, shift the tranny to N, and the transfer case to the middle position if equipped.
Remove the entire console. Slide the shifter beezel as far up vertically as you can. There are 4 clips you ned to remove to do it.
You will see a blue and black wire running into the back. Follow those wires to the resistor. You will see a transparent EL panel attatched to the resistor by two clips.
Usually, one or both of these clips has come loose, causing the light to work intermittantly. Clip them back on, and turn on the headlights to confirm that the light works correctly now.
Re-install everything in the opposite order.
Posted on Oct 11, 2009
Tips for a great answer:
Oct 22, 2015 | Cars & Trucks
Aug 30, 2013 | Jeep CJ7 Cars & Trucks
Nov 13, 2012 | 1995 Jeep Grand Cherokee
Jun 04, 2011 | 2000 Jeep Grand Cherokee
Feb 14, 2010 | 1994 Jeep Grand Cherokee
Jul 28, 2009 | 1995 Jeep Grand Cherokee
Nov 02, 2017 | 1995 Jeep Grand Cherokee
Apr 25, 2009 | 1995 Jeep Grand Cherokee
92 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: