Question about 1996 Jeep Grand Cherokee
Gear lever indicator won't light up
remove it and replace the lamp
see pages on body (console sections)
see it here
Posted on Jan 01, 2014
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
there are many sensors and and each airbag have sensors so you will have to get it scanned to know where to start. just a note air bag parts can be very expensive so check out your local salvage yard. they can save you hundreds. good luck
Posted on Sep 28, 2008
The little blade lock will lift up. see image..."http://econtent.autozone.com:24991/znetrgs/repair_guide_content/en_us/images//0900c152/80/0a/9d/4c//medium/0900c152800a9d4c.gif"
Posted on Sep 30, 2008
Hello and welcome to FixYa
The interior lights wont turn off cant because it can't get a conncetion definitely a headlight switch issue common problem for that make
Part # 05137535AA Headlight Switch Probably a dealer item very simple to change this yourself. Hope this gets you going.Please Rate Me. And you can always Ask Me.
Posted on Apr 27, 2009
Check the Trans fluid level with it running and at operating temperature. Jeep NAG1 transmissions are known to have the input electric seal leak trans fluid. Not an exspensive fix add Mopar ATF4 and then relace the guild seal.
Posted on Jul 20, 2009
There are two parts to it, a voltage resistor, and the EL panel itself.
You need to remove the console first. There are 2 screws under the front rubber pad, two under the cup holder, two in the bin. Remove those six first, take the storage bin out, then slide the rear cupholder out, remove the two screws under the cup holder, and one in front of it.
There are a total of 6 flat screws, and 3 self tapping screws you have removed.
Put the parking brake on, shift the tranny to N, and the transfer case to the middle position if equipped.
Remove the entire console. Slide the shifter beezel as far up vertically as you can. There are 4 clips you ned to remove to do it.
You will see a blue and black wire running into the back. Follow those wires to the resistor. You will see a transparent EL panel attatched to the resistor by two clips.
Usually, one or both of these clips has come loose, causing the light to work intermittantly. Clip them back on, and turn on the headlights to confirm that the light works correctly now.
Re-install everything in the opposite order.
Posted on Oct 11, 2009
Tips for a great answer:
Jul 16, 2016 | 1993 Jeep Grand Cherokee
Apr 20, 2016 | 2001 Jeep Grand Cherokee
Sep 14, 2014 | 2008 Jeep Grand Cherokee
Dec 21, 2013 | 1996 Jeep Grand Cherokee
Dec 18, 2011 | 1996 Jeep Grand Cherokee
May 04, 2011 | 1996 Jeep Grand Cherokee
Feb 04, 2010 | 1996 Jeep Grand Cherokee
Sep 16, 2009 | 1996 Jeep Grand Cherokee
Apr 17, 2009 | 1996 Jeep Grand Cherokee
92 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: