2001 Toyota Prado (exported from Japan). Compass reset procedure.
Hi, don't know if you figured it out, but I just (literally 10 minutes ago) calibrated the compass on my 2001 LandCruiser Prado by doing the following:
- Press the up and down arrows together until the inclinometer starts to blink.
- Then press the "Mode" button to switch to compass. The compass should start to blink.
- Drive your car in a 360 degree circle until the compass stops blinking.
- And that's about it.
Even though this is an old question I wanted to post the answer because I've been looking at this issue for a year and haven't found the solution online.
Please note that this page http://www.tlocuk.co.uk/forums/viewtopic.php?p=2302&sid=327bc81ab3b0160e82d7863b3e6417f5 pointed me in the right direction although the instructions there caused the inclinometer to be re-calibrated in my car. I had to tinker around and I figured out that if I pressed "mode", it switched to compass calibration.
Apr 22, 2010 |
2001 Toyota Land Cruiser