Question about 2002 Honda Civic
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: honda civic 2002
This is an almost un heard of problem. But it seems to me there is an electrical issue with your transmission. I'll explain why... If this was an actual mechanical component you could not turn off the car, then put back in drive and it work normally. So its definitely an electrical item that is reseting when you turn the car off, and then working again for the same amount of time it did the first time. Now the good thing is if you will take your car to a honda dealership they will fix this problem within an hour. Just make sure you go to a certified Honda dealership. Shouldnt cost ya that much most cost will be for the electrical part you need. Labor will run about 35 dollars an hour.. But like i said 1 hour should do it. So take 100 dollars for labor and the electrical component shouldnt be too bad i think you will be just fine man
Posted on Sep 14, 2008
SOURCE: 1998 hondaaccord will not start
Hello thank you for choosing FixYa.com for your answer my name is David.
from what you ar describeing it sounds like your neutral safety switch may be bad
there is a way to test it though to be sure follow this link for the directions on how to do that.
At this link it tells how to replace it if you need to also.good luck and thank you again for using FixYa.com
Posted on Nov 08, 2008
Its the parking pal in the transmission that's bad but let me ask something was the car in drive when this happen? if so then it's normal but if it was in park then it's not normal. The parking pal in the transmission is bad. Have a nice day
Posted on Dec 18, 2008
service the tranny.new oil and filter. the filter picks up trash and metal from clutches inside the tranny as they wear so ocationally the trans fluid needs to be changed.over haul the tranny if this doesnt work.
Posted on Apr 21, 2009
Is there an engine light?
Assuming there are no engine codes set
1. Do the idle learn procedure
2. Check fuel pressure (380 to 430 KPa)
3. Check idle speed (740 to 840RPM in P or N)
4. Check the brake pedal position switch (requires a scan tool)
If these all check out, look for air intake leaks, faulty harness and sensor connections.
As you can see, these steps should probably be done at a dealer.
Posted on May 21, 2009
Tips for a great answer:
Oct 24, 2016 | Cars & Trucks
Sep 05, 2014 | 2006 Chrysler Town & Country
Jan 22, 2014 | Saab 93 Cars & Trucks
This is an old warning issue or procedure, I had the same problem a few years ago with my Ford Taurus 1995, if rear stop lights not work, you wont be able to moved the shift out of Parking (P); this is to avoid driving without rear stop lights. If no lights, normally a fuse is blow out or all bulb lights are gone, please check.
There is an alternate procedure to be able to drive your car, but, avoid driving without Stop lights. Turn the ignition key to the point before starting the engine, this release the lock for the driving wheel and transmission shift, press the brake, put the shift in Neutral (N) and start the engine. Im not sure if your Ford Edge has the no key starting button or fob, there is a procedure to release the locks and be able to drive, should be in your drivers manual, but, again; the intention is to avoid moving the car without Stop Lights. I hope this helps. Happy Holidays and take care.
Dec 08, 2013 | 2008 Ford Edge
Mar 08, 2017 | 2004 Chevrolet Tahoe
Jan 05, 2010 | 2005 Nissan Altima
Oct 18, 2009 | 2003 GMC Envoy Xl
Jun 27, 2009 | 2001 Chevrolet Silverado 1500
Feb 24, 2009 | 1999 Saturn SL
27 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: