- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Vin is usually visible on drivers side front of dash where it meets windshield. To see it you will probably have to be on the outside of the vehicle looking in
The nut size on sensor is 19 to 20mm on 2002 ba 6 cylinder ford falcon coolant sensor back of head. Cut down tube spanner drill 2 X 6mm holes insert long shaft skinny screwdriver as lever insulate taped to hold to get started to undo normal right hand thread. Then use 19 mm ring when undone a few turns ,
We recently towed in a Ford Falcon Futura, a 1994 model
which had a ceased engine & did a complete over haul on it. Now the engine cranks but can not start.
Having the timing set on TDC we still can not get the engine to start.
What do you think I should do to have the engine run?
Call Jasper Engines in Indiana. Give them the serial number of the 94 engine. These guys can tell you if it will work or not. They are a great source of information and don't charge for answers! You may need the VIN numbers for both vehicles as well.
×